Hi!
On Wed, Sep 19, 2018 at 08:14:11PM +0000, Corentin Labbe wrote:
> This patch enable HDMI output on sun8i-h3-nanopi-m1-plus.
>
> Signed-off-by: Corentin Labbe <clabbe@xxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> index 65cba1050802..88b5ff6b66b6 100644
> --- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
> @@ -67,6 +67,21 @@
> pinctrl-names = "default";
> reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
> };
> +
> + connector {
> + compatible = "hdmi-connector";
> + type = "a";
> +
> + port {
> + hdmi_con_in: endpoint {
> + remote-endpoint = <&hdmi_out_con>;
> + };
> + };
> + };
> +};
> +
> +&de {
> + status = "okay";
> };
>
> &ehci1 {
> @@ -94,6 +109,17 @@
> };
> };
>
> +&hdmi {
> + status = "okay";
> +};
> +
> +&hdmi_out {
> + hdmi_out_con: endpoint {
> + remote-endpoint = <&hdmi_con_in>;
> + };
> + status = "okay";
you don't need that status property here
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Attachment:
signature.asc
Description: PGP signature
