This patch documents following updates of the Exynos4 SoC camera subsystem
devicetree binding:
- addition of #clock-cells property to 'camera' node - the #clock-cells
property is needed when the sensor sub-devices use clock provided by
the camera host interface,
- addition of an optional clock-output-names property,
- change of the clock-frequency at image sensor node from mandatory to
an optional property - the sensor devices can now control their clock
themselves and there should be no need to require this property by the
camera host device binding, a default frequency value can often be used.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
Changes since v5:
- none.
Changes since v4:
- dropped a requirement of specific order of values in clocks/
clock-names properties (Mark) and reference to clock-names in
clock-output-names property description (Mark).
---
.../devicetree/bindings/media/samsung-fimc.txt | 34 +++++++++++++++-----
1 file changed, 26 insertions(+), 8 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt
index 96312f6..dbd4020 100644
--- a/Documentation/devicetree/bindings/media/samsung-fimc.txt
+++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt
@@ -32,6 +32,21 @@ way around.
The 'camera' node must include at least one 'fimc' child node.
+Optional properties:
+
+- #clock-cells: from the common clock bindings (../clock/clock-bindings.txt),
+ must be 1. A clock provider is associated with the 'camera' node and it should
+ be referenced by external sensors that use clocks provided by the SoC on
+ CAM_*_CLKOUT pins. The clock specifier cell stores an index of a clock.
+ The indices are 0, 1 for CAM_A_CLKOUT, CAM_B_CLKOUT clocks respectively.
+
+- clock-output-names: from the common clock bindings, should contain names of
+ clocks registered by the camera subsystem corresponding to CAM_A_CLKOUT,
+ CAM_B_CLKOUT output clocks respectively.
+
+Note: #clock-cells and clock-output-names are mandatory properties if external
+image sensor devices reference 'camera' device node as a clock provider.
+
'fimc' device nodes
-------------------
@@ -97,8 +112,8 @@ Image sensor nodes
The sensor device nodes should be added to their control bus controller (e.g.
I2C0) nodes and linked to a port node in the csis or the parallel-ports node,
using the common video interfaces bindings, defined in video-interfaces.txt.
-The implementation of this bindings requires clock-frequency property to be
-present in the sensor device nodes.
+An optional clock-frequency property needs to be present in the sensor device
+nodes. Default value when this property is not present is 24 MHz.
Example:
@@ -114,7 +129,7 @@ Example:
vddio-supply = <...>;
clock-frequency = <24000000>;
- clocks = <...>;
+ clocks = <&camera 1>;
clock-names = "mclk";
port {
@@ -135,7 +150,7 @@ Example:
vddio-supply = <...>;
clock-frequency = <24000000>;
- clocks = <...>;
+ clocks = <&camera 0>;
clock-names = "mclk";
port {
@@ -149,12 +164,15 @@ Example:
camera {
compatible = "samsung,fimc", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- status = "okay";
-
+ clocks = <&clock 132>, <&clock 133>;
+ clock-names = "sclk_cam0", "sclk_cam1";
+ #clock-cells = <1>;
+ clock-output-names = "cam_mclk_a", "cam_mclk_b";
pinctrl-names = "default";
pinctrl-0 = <&cam_port_a_clk_active>;
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <1>;
/* parallel camera ports */
parallel-ports {
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
