Hi,
On Mon, Sep 17, 2018 at 01:03:31PM -0700, Baolin Wang wrote:
> This patch adds the SC2731 PMIC switch charger support.
>
> Signed-off-by: Baolin Wang <baolin.wang@xxxxxxxxxx>
> Reviewed-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> ---
Thanks, queued.
-- Sebastian
> Changes from v2:
> - Add reviewed tag from Krzysztof.
> - Change current unit to uA instead of mA.
>
> Changes from v1:
> - Remove some redundant head files.
> - Add one mutex to make sure getting the charger status is correct.
> - Fix some coding style issues.
> - Use standard DT properties.
> ---
> drivers/power/supply/Kconfig | 7 +
> drivers/power/supply/Makefile | 1 +
> drivers/power/supply/sc2731_charger.c | 504 ++++++++++++++++++++++++++++++++++
> 3 files changed, 512 insertions(+)
> create mode 100644 drivers/power/supply/sc2731_charger.c
>
> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> index ff6dab0..f27cf07 100644
> --- a/drivers/power/supply/Kconfig
> +++ b/drivers/power/supply/Kconfig
> @@ -645,4 +645,11 @@ config CHARGER_CROS_USBPD
> what is connected to USB PD ports from the EC and converts
> that into power_supply properties.
>
> +config CHARGER_SC2731
> + tristate "Spreadtrum SC2731 charger driver"
> + depends on MFD_SC27XX_PMIC || COMPILE_TEST
> + help
> + Say Y here to enable support for battery charging with SC2731
> + PMIC chips.
> +
> endif # POWER_SUPPLY
> diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
> index a26b402..767105b 100644
> --- a/drivers/power/supply/Makefile
> +++ b/drivers/power/supply/Makefile
> @@ -85,3 +85,4 @@ obj-$(CONFIG_CHARGER_TPS65217) += tps65217_charger.o
> obj-$(CONFIG_AXP288_FUEL_GAUGE) += axp288_fuel_gauge.o
> obj-$(CONFIG_AXP288_CHARGER) += axp288_charger.o
> obj-$(CONFIG_CHARGER_CROS_USBPD) += cros_usbpd-charger.o
> +obj-$(CONFIG_CHARGER_SC2731) += sc2731_charger.o
> diff --git a/drivers/power/supply/sc2731_charger.c b/drivers/power/supply/sc2731_charger.c
> new file mode 100644
> index 0000000..525a820
> --- /dev/null
> +++ b/drivers/power/supply/sc2731_charger.c
> @@ -0,0 +1,504 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (C) 2018 Spreadtrum Communications Inc.
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/power_supply.h>
> +#include <linux/usb/phy.h>
> +#include <linux/regmap.h>
> +#include <linux/notifier.h>
> +#include <linux/of.h>
> +
> +/* PMIC global registers definition */
> +#define SC2731_CHARGE_STATUS 0xedc
> +#define SC2731_CHARGE_FULL BIT(4)
> +#define SC2731_MODULE_EN1 0xc0c
> +#define SC2731_CHARGE_EN BIT(5)
> +
> +/* SC2731 switch charger registers definition */
> +#define SC2731_CHG_CFG0 0x0
> +#define SC2731_CHG_CFG1 0x4
> +#define SC2731_CHG_CFG2 0x8
> +#define SC2731_CHG_CFG3 0xc
> +#define SC2731_CHG_CFG4 0x10
> +#define SC2731_CHG_CFG5 0x28
> +
> +/* SC2731_CHG_CFG0 register definition */
> +#define SC2731_PRECHG_RNG_SHIFT 11
> +#define SC2731_PRECHG_RNG_MASK GENMASK(12, 11)
> +
> +#define SC2731_TERMINATION_VOL_MASK GENMASK(2, 1)
> +#define SC2731_TERMINATION_VOL_SHIFT 1
> +#define SC2731_TERMINATION_VOL_CAL_MASK GENMASK(8, 3)
> +#define SC2731_TERMINATION_VOL_CAL_SHIFT 3
> +#define SC2731_TERMINATION_CUR_MASK GENMASK(2, 0)
> +
> +#define SC2731_CC_EN BIT(13)
> +#define SC2731_CHARGER_PD BIT(0)
> +
> +/* SC2731_CHG_CFG1 register definition */
> +#define SC2731_CUR_MASK GENMASK(5, 0)
> +
> +/* SC2731_CHG_CFG5 register definition */
> +#define SC2731_CUR_LIMIT_SHIFT 8
> +#define SC2731_CUR_LIMIT_MASK GENMASK(9, 8)
> +
> +/* Default current definition (unit is mA) */
> +#define SC2731_CURRENT_LIMIT_100 100
> +#define SC2731_CURRENT_LIMIT_500 500
> +#define SC2731_CURRENT_LIMIT_900 900
> +#define SC2731_CURRENT_LIMIT_2000 2000
> +#define SC2731_CURRENT_PRECHG 450
> +#define SC2731_CURRENT_STEP 50
> +
> +struct sc2731_charger_info {
> + struct device *dev;
> + struct regmap *regmap;
> + struct usb_phy *usb_phy;
> + struct notifier_block usb_notify;
> + struct power_supply *psy_usb;
> + struct mutex lock;
> + bool charging;
> + u32 base;
> +};
> +
> +static void sc2731_charger_stop_charge(struct sc2731_charger_info *info)
> +{
> + regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0,
> + SC2731_CC_EN, 0);
> +
> + regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0,
> + SC2731_CHARGER_PD, SC2731_CHARGER_PD);
> +}
> +
> +static int sc2731_charger_start_charge(struct sc2731_charger_info *info)
> +{
> + int ret;
> +
> + /* Enable charger constant current mode */
> + ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0,
> + SC2731_CC_EN, SC2731_CC_EN);
> + if (ret)
> + return ret;
> +
> + /* Start charging */
> + return regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0,
> + SC2731_CHARGER_PD, 0);
> +}
> +
> +static int sc2731_charger_set_current_limit(struct sc2731_charger_info *info,
> + u32 limit)
> +{
> + u32 val;
> +
> + if (limit <= SC2731_CURRENT_LIMIT_100)
> + val = 0;
> + else if (limit <= SC2731_CURRENT_LIMIT_500)
> + val = 3;
> + else if (limit <= SC2731_CURRENT_LIMIT_900)
> + val = 2;
> + else
> + val = 1;
> +
> + return regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG5,
> + SC2731_CUR_LIMIT_MASK,
> + val << SC2731_CUR_LIMIT_SHIFT);
> +}
> +
> +static int sc2731_charger_set_current(struct sc2731_charger_info *info, u32 cur)
> +{
> + u32 val;
> + int ret;
> +
> + if (cur > SC2731_CURRENT_LIMIT_2000)
> + cur = SC2731_CURRENT_LIMIT_2000;
> + else if (cur < SC2731_CURRENT_PRECHG)
> + cur = SC2731_CURRENT_PRECHG;
> +
> + /* Calculate the step value, each step is 50 mA */
> + val = (cur - SC2731_CURRENT_PRECHG) / SC2731_CURRENT_STEP;
> +
> + /* Set pre-charge current as 450 mA */
> + ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0,
> + SC2731_PRECHG_RNG_MASK,
> + 0x3 << SC2731_PRECHG_RNG_SHIFT);
> + if (ret)
> + return ret;
> +
> + return regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG1,
> + SC2731_CUR_MASK, val);
> +}
> +
> +static int sc2731_charger_get_status(struct sc2731_charger_info *info)
> +{
> + u32 val;
> + int ret;
> +
> + ret = regmap_read(info->regmap, SC2731_CHARGE_STATUS, &val);
> + if (ret)
> + return ret;
> +
> + if (val & SC2731_CHARGE_FULL)
> + return POWER_SUPPLY_STATUS_FULL;
> +
> + return POWER_SUPPLY_STATUS_CHARGING;
> +}
> +
> +static int sc2731_charger_get_current(struct sc2731_charger_info *info,
> + u32 *cur)
> +{
> + int ret;
> + u32 val;
> +
> + ret = regmap_read(info->regmap, info->base + SC2731_CHG_CFG1, &val);
> + if (ret)
> + return ret;
> +
> + val &= SC2731_CUR_MASK;
> + *cur = val * SC2731_CURRENT_STEP + SC2731_CURRENT_PRECHG;
> +
> + return 0;
> +}
> +
> +static int sc2731_charger_get_current_limit(struct sc2731_charger_info *info,
> + u32 *cur)
> +{
> + int ret;
> + u32 val;
> +
> + ret = regmap_read(info->regmap, info->base + SC2731_CHG_CFG5, &val);
> + if (ret)
> + return ret;
> +
> + val = (val & SC2731_CUR_LIMIT_MASK) >> SC2731_CUR_LIMIT_SHIFT;
> +
> + switch (val) {
> + case 0:
> + *cur = SC2731_CURRENT_LIMIT_100;
> + break;
> +
> + case 1:
> + *cur = SC2731_CURRENT_LIMIT_2000;
> + break;
> +
> + case 2:
> + *cur = SC2731_CURRENT_LIMIT_900;
> + break;
> +
> + case 3:
> + *cur = SC2731_CURRENT_LIMIT_500;
> + break;
> +
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int
> +sc2731_charger_usb_set_property(struct power_supply *psy,
> + enum power_supply_property psp,
> + const union power_supply_propval *val)
> +{
> + struct sc2731_charger_info *info = power_supply_get_drvdata(psy);
> + int ret;
> +
> + mutex_lock(&info->lock);
> +
> + if (!info->charging) {
> + mutex_unlock(&info->lock);
> + return -ENODEV;
> + }
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> + ret = sc2731_charger_set_current(info, val->intval / 1000);
> + if (ret < 0)
> + dev_err(info->dev, "set charge current failed\n");
> + break;
> +
> + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> + ret = sc2731_charger_set_current_limit(info,
> + val->intval / 1000);
> + if (ret < 0)
> + dev_err(info->dev, "set input current limit failed\n");
> + break;
> +
> + default:
> + ret = -EINVAL;
> + }
> +
> + mutex_unlock(&info->lock);
> + return ret;
> +}
> +
> +static int sc2731_charger_usb_get_property(struct power_supply *psy,
> + enum power_supply_property psp,
> + union power_supply_propval *val)
> +{
> + struct sc2731_charger_info *info = power_supply_get_drvdata(psy);
> + int ret = 0;
> + u32 cur;
> +
> + mutex_lock(&info->lock);
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_STATUS:
> + if (info->charging)
> + val->intval = sc2731_charger_get_status(info);
> + else
> + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
> + break;
> +
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> + if (!info->charging) {
> + val->intval = 0;
> + } else {
> + ret = sc2731_charger_get_current(info, &cur);
> + if (ret)
> + goto out;
> +
> + val->intval = cur * 1000;
> + }
> + break;
> +
> + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> + if (!info->charging) {
> + val->intval = 0;
> + } else {
> + ret = sc2731_charger_get_current_limit(info, &cur);
> + if (ret)
> + goto out;
> +
> + val->intval = cur * 1000;
> + }
> + break;
> +
> + default:
> + ret = -EINVAL;
> + }
> +
> +out:
> + mutex_unlock(&info->lock);
> + return ret;
> +}
> +
> +static int sc2731_charger_property_is_writeable(struct power_supply *psy,
> + enum power_supply_property psp)
> +{
> + int ret;
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> + ret = 1;
> + break;
> +
> + default:
> + ret = 0;
> + }
> +
> + return ret;
> +}
> +
> +static enum power_supply_property sc2731_usb_props[] = {
> + POWER_SUPPLY_PROP_STATUS,
> + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
> + POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
> +};
> +
> +static const struct power_supply_desc sc2731_charger_desc = {
> + .name = "sc2731_charger",
> + .type = POWER_SUPPLY_TYPE_USB,
> + .properties = sc2731_usb_props,
> + .num_properties = ARRAY_SIZE(sc2731_usb_props),
> + .get_property = sc2731_charger_usb_get_property,
> + .set_property = sc2731_charger_usb_set_property,
> + .property_is_writeable = sc2731_charger_property_is_writeable,
> +};
> +
> +static int sc2731_charger_usb_change(struct notifier_block *nb,
> + unsigned long limit, void *data)
> +{
> + struct sc2731_charger_info *info =
> + container_of(nb, struct sc2731_charger_info, usb_notify);
> + int ret = 0;
> +
> + mutex_lock(&info->lock);
> +
> + if (limit > 0) {
> + /* set current limitation and start to charge */
> + ret = sc2731_charger_set_current_limit(info, limit);
> + if (ret)
> + goto out;
> +
> + ret = sc2731_charger_set_current(info, limit);
> + if (ret)
> + goto out;
> +
> + ret = sc2731_charger_start_charge(info);
> + if (ret)
> + goto out;
> +
> + info->charging = true;
> + } else {
> + /* Stop charging */
> + info->charging = false;
> + sc2731_charger_stop_charge(info);
> + }
> +
> +out:
> + mutex_unlock(&info->lock);
> + return ret;
> +}
> +
> +static int sc2731_charger_hw_init(struct sc2731_charger_info *info)
> +{
> + struct power_supply_battery_info bat_info = { };
> + u32 term_currrent, term_voltage, cur_val, vol_val;
> + int ret;
> +
> + /* Enable charger module */
> + ret = regmap_update_bits(info->regmap, SC2731_MODULE_EN1,
> + SC2731_CHARGE_EN, SC2731_CHARGE_EN);
> + if (ret)
> + return ret;
> +
> + ret = power_supply_get_battery_info(info->psy_usb, &bat_info);
> + if (ret) {
> + dev_warn(info->dev, "no battery information is supplied\n");
> +
> + /*
> + * If no battery information is supplied, we should set
> + * default charge termination current to 120 mA, and default
> + * charge termination voltage to 4.35V.
> + */
> + cur_val = 0x2;
> + vol_val = 0x1;
> + } else {
> + term_currrent = bat_info.charge_term_current_ua / 1000;
> +
> + if (term_currrent <= 90)
> + cur_val = 0;
> + else if (term_currrent >= 265)
> + cur_val = 0x7;
> + else
> + cur_val = ((term_currrent - 90) / 25) + 1;
> +
> + term_voltage = bat_info.constant_charge_voltage_max_uv / 1000;
> +
> + if (term_voltage > 4500)
> + term_voltage = 4500;
> +
> + if (term_voltage > 4200)
> + vol_val = (term_voltage - 4200) / 100;
> + else
> + vol_val = 0;
> + }
> +
> + /* Set charge termination current */
> + ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG2,
> + SC2731_TERMINATION_CUR_MASK, cur_val);
> + if (ret)
> + goto error;
> +
> + /* Set charge termination voltage */
> + ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0,
> + SC2731_TERMINATION_VOL_MASK |
> + SC2731_TERMINATION_VOL_CAL_MASK,
> + (vol_val << SC2731_TERMINATION_VOL_SHIFT) |
> + (0x6 << SC2731_TERMINATION_VOL_CAL_SHIFT));
> + if (ret)
> + goto error;
> +
> + return 0;
> +
> +error:
> + regmap_update_bits(info->regmap, SC2731_MODULE_EN1, SC2731_CHARGE_EN, 0);
> + return ret;
> +}
> +
> +static int sc2731_charger_probe(struct platform_device *pdev)
> +{
> + struct device_node *np = pdev->dev.of_node;
> + struct sc2731_charger_info *info;
> + struct power_supply_config charger_cfg = { };
> + int ret;
> +
> + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
> + if (!info)
> + return -ENOMEM;
> +
> + mutex_init(&info->lock);
> + info->dev = &pdev->dev;
> +
> + info->regmap = dev_get_regmap(pdev->dev.parent, NULL);
> + if (!info->regmap) {
> + dev_err(&pdev->dev, "failed to get charger regmap\n");
> + return -ENODEV;
> + }
> +
> + ret = of_property_read_u32(np, "reg", &info->base);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to get register address\n");
> + return -ENODEV;
> + }
> +
> + charger_cfg.drv_data = info;
> + charger_cfg.of_node = np;
> + info->psy_usb = devm_power_supply_register(&pdev->dev,
> + &sc2731_charger_desc,
> + &charger_cfg);
> + if (IS_ERR(info->psy_usb)) {
> + dev_err(&pdev->dev, "failed to register power supply\n");
> + return PTR_ERR(info->psy_usb);
> + }
> +
> + ret = sc2731_charger_hw_init(info);
> + if (ret)
> + return ret;
> +
> + info->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "phys", 0);
> + if (IS_ERR(info->usb_phy)) {
> + dev_err(&pdev->dev, "failed to find USB phy\n");
> + return PTR_ERR(info->usb_phy);
> + }
> +
> + info->usb_notify.notifier_call = sc2731_charger_usb_change;
> + ret = usb_register_notifier(info->usb_phy, &info->usb_notify);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to register notifier: %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int sc2731_charger_remove(struct platform_device *pdev)
> +{
> + struct sc2731_charger_info *info = platform_get_drvdata(pdev);
> +
> + usb_unregister_notifier(info->usb_phy, &info->usb_notify);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id sc2731_charger_of_match[] = {
> + { .compatible = "sprd,sc2731-charger", },
> + { }
> +};
> +
> +static struct platform_driver sc2731_charger_driver = {
> + .driver = {
> + .name = "sc2731-charger",
> + .of_match_table = sc2731_charger_of_match,
> + },
> + .probe = sc2731_charger_probe,
> + .remove = sc2731_charger_remove,
> +};
> +
> +module_platform_driver(sc2731_charger_driver);
> +
> +MODULE_DESCRIPTION("Spreadtrum SC2731 Charger Driver");
> +MODULE_LICENSE("GPL v2");
> --
> 1.9.1
>
Attachment:
signature.asc
Description: PGP signature
