On Mon, Sep 17, 2018 at 07:23:36AM -0700, Rob Herring wrote: > On Mon, Sep 17, 2018 at 1:36 AM Guo Ren <ren_guo@xxxxxxxxx> wrote: > > > > On Mon, Sep 17, 2018 at 02:23:36AM -0400, Rob Herring wrote: > > > On Sun, Sep 16, 2018 at 04:50:03PM +0800, Guo Ren wrote: > > > > Signed-off-by: Guo Ren <ren_guo@xxxxxxxxx> > > > > > > Needs a commit description. > > > > > > > --- > > > > .../interrupt-controller/csky,apb-intc.txt | 70 ++++++++++++++++++++++ > > > > 1 file changed, 70 insertions(+) > > > > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt > > > > > > > > diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt > > > > new file mode 100644 > > > > index 0000000..be7c3d1 > > > > --- /dev/null > > > > +++ b/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt > > > > @@ -0,0 +1,70 @@ > > > > +============================== > > > > +C-SKY APB Interrupt Controller > > > > +============================== > > > > + > > > > +C-SKY APB Interrupt Controller is a simple soc interrupt controller > > > > +on the apb bus and we only use it as root irq controller. > > > > + > > > > + - csky,apb-intc is used in a lot of csky fpgas and socs, it support 64 irq nums. > > > > + - csky,dual-apb-intc consists of 2 apb-intc and 128 irq nums supported. > > > > + - csky,gx6605s-intc is gx6605s soc internal irq interrupt controller, 64 irq nums. > > > > > > Is there a relationship between csky,gx6605s-intc and csky,apb-intc? > > They all use pending register to get irq num and use enable register to > > mask/unmask. > > > > > > + - support-pulse-signal: > > > > + Usage: select > > > > + Description: to support pulse signal flag > > > > > > What is this for? > > This is a level-triger interrupt controller at first, but we want it > > to support pulse signal. It means that when the pulse signal coming, > > the pending register will hold signals without clear the IFR reg. > > > > Some C-SKY cpu's socs need this feature to support pulse interrupt > > signal. > > So an edge triggered interrupt. We have a way to support that on a per > interrupt basis with a 2nd cell (which you should consider if you may > need anyways). But this is a global setting for all interrupts the > interrupt controller serves? If so, it's fine, Yes, it's a global setting for all interrupts. not really edge triggered interrupt for every interrupt. > but does need a vendor prefix. vendor prefix? Em ... it's just used in fpga now. Best Regards Guo Ren
