Patch series adding support for ROHM BD71847 PMIC. ROHM BD71847 is modified version of ROHM BD71837 Power Management IC. BD71847 integrates 6 buck regulators and 6 LDO’s. The patch series adds support for BD71847 in BD71837 driver. It also extends BD71837 to support all BUCK/LDO output voltages. Support for "pickable voltage ranges" is introduced in order to fully support BD71837/BD71847 voltage selection registers. Some of the voltage regulators provide different multiple voltage ranges and output voltage is determined by range selection bit(s) and voltage selection bits instead of plain voltage selection bits. Changelog v3 - Fix warning caused by void * to unsigned int cast - Fix patch dependency issue (patch 4 used define from patch 5) - Fix indent problem. Changelog v2 - Dropped first patch (voltage monitoring fix) and "rebased" on top of next-20180912 because first patch was already applied. - Fixed two commit message typos. Fixes based on comments from Lee Jones - removed PMIC revision check. - stored chip type directly to data pointer - minor readability improvement to DT binding - unified naming for last enum members - moved unrelated changes from pickable ranges patch - removed C++ style comment Patch 2: limited BD71847 support (without range selection) Patch 3: BD71847 device-tree bindings for regulators Patch 4: BD71847 device-tree bindings for mfd Patch 5: Voltage range selection support to regulator helpers Patch 6: Simple renaming plenty of BD71837 occurrences to BD718XX Patch 7: BD71837/BD71847 Full voltage range support using helpers from patch 5 Patch 8: Renaming bd71837 regulator driver to bd718x7 this patch series is based on linux-next tag next-20180912. Matti Vaittinen (7): regulator/mfd: Support ROHM BD71847 power management IC regulator: dt bindings: add BD71847 device-tree binding documentation mfd: dt bindings: add BD71847 device-tree binding documentation regulator: Support regulators where voltage ranges are selectable regulator/mfd: bd718xx: rename bd71837/bd71847 common instances regulator: bd718XX use pickable ranges regulator: bd718xx: rename bd71837 to 718xx .../devicetree/bindings/mfd/rohm,bd71837-pmic.txt | 17 +- .../bindings/regulator/rohm,bd71837-regulator.txt | 12 +- drivers/mfd/rohm-bd718x7.c | 162 ++- drivers/regulator/Kconfig | 2 +- drivers/regulator/Makefile | 2 +- drivers/regulator/bd71837-regulator.c | 644 ----------- drivers/regulator/bd718x7-regulator.c | 1138 ++++++++++++++++++++ drivers/regulator/core.c | 5 + drivers/regulator/helpers.c | 232 ++++ include/linux/mfd/rohm-bd718x7.h | 333 +++--- include/linux/regulator/driver.h | 20 +- 11 files changed, 1646 insertions(+), 921 deletions(-) delete mode 100644 drivers/regulator/bd71837-regulator.c create mode 100644 drivers/regulator/bd718x7-regulator.c -- 2.14.3
