HSIO register address space should be handled outside of the MAC
controller as there are some registers for PLL5 configuring,
SerDes/switch port muxing and a thermal sensor IP, so let's remove it.
Acked-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
Signed-off-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxx>
---
Documentation/devicetree/bindings/mips/mscc.txt | 16 ++++++++++++-
Documentation/devicetree/bindings/net/mscc-ocelot.txt | 9 ++-----
2 files changed, 19 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/mips/mscc.txt b/Documentation/devicetree/bindings/mips/mscc.txt
index ae15ec3..bc817e9 100644
--- a/Documentation/devicetree/bindings/mips/mscc.txt
+++ b/Documentation/devicetree/bindings/mips/mscc.txt
@@ -41,3 +41,19 @@ Example:
compatible = "mscc,ocelot-cpu-syscon", "syscon";
reg = <0x70000000 0x2c>;
};
+
+o HSIO regs:
+
+The SoC has a few registers (HSIO) handling miscellaneous functionalities:
+configuration and status of PLL5, RCOMP, SyncE, SerDes configurations and
+status, SerDes muxing and a thermal sensor.
+
+Required properties:
+- compatible: Should be "mscc,ocelot-hsio", "syscon", "simple-mfd"
+- reg : Should contain registers location and length
+
+Example:
+ syscon@10d0000 {
+ compatible = "mscc,ocelot-hsio", "syscon", "simple-mfd";
+ reg = <0x10d0000 0x10000>;
+ };
diff --git a/Documentation/devicetree/bindings/net/mscc-ocelot.txt b/Documentation/devicetree/bindings/net/mscc-ocelot.txt
index 0a84711..9e5c17d 100644
--- a/Documentation/devicetree/bindings/net/mscc-ocelot.txt
+++ b/Documentation/devicetree/bindings/net/mscc-ocelot.txt
@@ -12,7 +12,6 @@ Required properties:
- "sys"
- "rew"
- "qs"
- - "hsio"
- "qsys"
- "ana"
- "portX" with X from 0 to the number of last port index available on that
@@ -45,7 +44,6 @@ Example:
reg = <0x1010000 0x10000>,
<0x1030000 0x10000>,
<0x1080000 0x100>,
- <0x10d0000 0x10000>,
<0x11e0000 0x100>,
<0x11f0000 0x100>,
<0x1200000 0x100>,
@@ -59,10 +57,9 @@ Example:
<0x1280000 0x100>,
<0x1800000 0x80000>,
<0x1880000 0x10000>;
- reg-names = "sys", "rew", "qs", "hsio", "port0",
- "port1", "port2", "port3", "port4", "port5",
- "port6", "port7", "port8", "port9", "port10",
- "qsys", "ana";
+ reg-names = "sys", "rew", "qs", "port0", "port1", "port2",
+ "port3", "port4", "port5", "port6", "port7",
+ "port8", "port9", "port10", "qsys", "ana";
interrupts = <21 22>;
interrupt-names = "xtr", "inj";
--
git-series 0.9.1
