On 08/09/18 05:54, Srinath Mannam wrote: > These patches adds the stingray thermal driver and its > corresponding DT nodes with documentation. > > Changes from v2: > - All stingray TMON DT nodes are combine together into single. > Temperature registers are combined into one mem resource. > brcm,tmon-mask parameter has available TMONs mask value. > - All available TMONs are initialized together in single > instance of driver probe call. > > Changes from v1: > - Fixed auto build sparce warning. Thermal maintainers, can you please review patch #3? The binding and DTS changes can go through arm-soc if you would like, or you can take patches 1 and 3 and I take patch 2, either way is fine. Thank you > > Pramod Kumar (3): > dt-bindings: thermal: Add binding document for SR thermal > arm64: dts: stingray: Add Stingray Thermal DT support. > thermal: broadcom: Add Stingray thermal driver > > .../bindings/thermal/brcm,sr-thermal.txt | 23 +++ > .../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 13 ++ > drivers/thermal/Kconfig | 3 +- > drivers/thermal/broadcom/Kconfig | 9 + > drivers/thermal/broadcom/Makefile | 1 + > drivers/thermal/broadcom/sr-thermal.c | 216 +++++++++++++++++++++ > 6 files changed, 264 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt > create mode 100644 drivers/thermal/broadcom/sr-thermal.c > -- Florian
