On 07/09/2018 21:35:08+0200, Sam Ravnborg wrote:
> From: Søren Andersen <san@xxxxxxx>
>
> Add support for specifying the quartz load in the DT node.
> The pcf85063 may use either a 7 pF or an 12.5 pF xtal.
> If the rtc has the wrong configuration the time will
> drift several hours/week.
>
> If nothing is specified in DT then the factory default of 7 pF is used.
>
> Signed-off-by: Søren Andersen <san@xxxxxxx>
> Signed-off-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
> Cc: Alessandro Zummo <a.zummo@xxxxxxxxxxxx>
> Cc: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
> ---
> drivers/rtc/rtc-pcf85063.c | 31 +++++++++++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
>
> diff --git a/drivers/rtc/rtc-pcf85063.c b/drivers/rtc/rtc-pcf85063.c
> index 283c2335b01b..38163446664f 100644
> --- a/drivers/rtc/rtc-pcf85063.c
> +++ b/drivers/rtc/rtc-pcf85063.c
> @@ -27,6 +27,7 @@
> */
>
> #define PCF85063_REG_CTRL1 0x00 /* status */
> +#define PCF85063_REG_CTRL1_CAP_SEL BIT(0)
> #define PCF85063_REG_CTRL1_STOP BIT(5)
> #define PCF85063_REG_CTRL2 0x01
>
> @@ -180,6 +181,31 @@ static const struct rtc_class_ops pcf85063_rtc_ops = {
> .set_time = pcf85063_rtc_set_time
> };
>
> +static int pcf85063_select_capacitance(struct i2c_client *client)
> +{
> + int rc;
> + u8 reg;
> +
> + rc = i2c_smbus_read_byte_data(client, PCF85063_REG_CTRL1);
> + if (rc < 0) {
> + dev_err(&client->dev, "Failing to read Control1 reg\n");
> + return -EIO;
> + }
> +
> + if (device_property_present(&client->dev, "nxp,quartz_load_12.5pf"))
> + reg = rc |= PCF85063_REG_CTRL1_CAP_SEL;
> + else
> + reg = rc &= ~PCF85063_REG_CTRL1_CAP_SEL;
That one is more straight forward, set it to the value from DT or leave
it alone.
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
