SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.
Cc: Vladimir Zapolskiy <vz@xxxxxxxxx>
Cc: Sylvain Lemieux <slemieux.tyco@xxxxxxxxx>
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
arch/arm/boot/dts/lpc32xx.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index abff7ef7c9cd..b7303a4e4236 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -179,7 +179,7 @@
* ssp0 and spi1 are shared pins;
* enable one in your board dts, as needed.
*/
- ssp0: ssp@20084000 {
+ ssp0: spi@20084000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x20084000 0x1000>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
@@ -199,7 +199,7 @@
* ssp1 and spi2 are shared pins;
* enable one in your board dts, as needed.
*/
- ssp1: ssp@2008c000 {
+ ssp1: spi@2008c000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x2008c000 0x1000>;
interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
--
2.17.1
