Document support for the R-Car gen3 CMT types 0/1 bindings -- they seem
to be the same CMT types 0/1 as in the R-Car gen2 SoCs.
Also document R8A779{7|8}0 bindings as these are the R-Car gen3 SoCs for
which the initial support was done.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
---
Changes in version 2:
- new patch, split from the next one.
Documentation/devicetree/bindings/timer/renesas,cmt.txt | 7 +++++++
1 file changed, 7 insertions(+)
Index: tip/Documentation/devicetree/bindings/timer/renesas,cmt.txt
===================================================================
--- tip.orig/Documentation/devicetree/bindings/timer/renesas,cmt.txt
+++ tip/Documentation/devicetree/bindings/timer/renesas,cmt.txt
@@ -34,6 +34,10 @@ Required Properties:
- "renesas,r8a7793-cmt1" for the 48-bit CMT1 device included in r8a7793.
- "renesas,r8a7794-cmt0" for the 32-bit CMT0 device included in r8a7794.
- "renesas,r8a7794-cmt1" for the 48-bit CMT1 device included in r8a7794.
+ - "renesas,r8a77970-cmt0" for the 32-bit CMT0 device included in r8a77970.
+ - "renesas,r8a77970-cmt1" for the 48-bit CMT1 device included in r8a77970.
+ - "renesas,r8a77980-cmt0" for the 32-bit CMT0 device included in r8a77980.
+ - "renesas,r8a77980-cmt1" for the 48-bit CMT1 device included in r8a77980.
- "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2
and RZ/G1.
@@ -41,6 +45,9 @@ Required Properties:
and RZ/G1.
These are fallbacks for r8a73a4, R-Car Gen2 and RZ/G1 entries
listed above.
+ - "renesas,rcar-gen3-cmt0" for 32-bit CMT0 devices included in R-Car Gen3.
+ - "renesas,rcar-gen3-cmt1" for 48-bit CMT1 devices included in R-Car Gen3.
+ These are fallbacks for R-Car Gen3 entries listed above.
- reg: base address and length of the registers block for the timer module.
- interrupts: interrupt-specifier for the timer, one per channel.
