BD71847 is reduced version of BD71837. DVS bucks 3 and 4 are removed as is LDO7. Voltage ranges of some regulators are expanded. Add initial support for BD71847 with BD71837 driver. Signed-off-by: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx> --- drivers/mfd/rohm-bd718x7.c | 68 +-- drivers/regulator/bd71837-regulator.c | 1055 +++++++++++++++++++++++---------- include/linux/mfd/rohm-bd718x7.h | 271 ++++----- 3 files changed, 877 insertions(+), 517 deletions(-) diff --git a/drivers/mfd/rohm-bd718x7.c b/drivers/mfd/rohm-bd718x7.c index 75c8ec659547..31de0953c3a8 100644 --- a/drivers/mfd/rohm-bd718x7.c +++ b/drivers/mfd/rohm-bd718x7.c @@ -7,22 +7,16 @@ // Datasheet available from // https://www.rohm.com/datasheet/BD71837MWV/bd71837mwv-e +#include <linux/gpio_keys.h> #include <linux/i2c.h> #include <linux/input.h> #include <linux/interrupt.h> #include <linux/mfd/rohm-bd718x7.h> #include <linux/mfd/core.h> #include <linux/module.h> +#include <linux/of_device.h> #include <linux/regmap.h> -/* - * gpio_keys.h requires definiton of bool. It is brought in - * by above includes. Keep this as last until gpio_keys.h gets fixed. - */ -#include <linux/gpio_keys.h> - -static const u8 supported_revisions[] = { 0xA2 /* BD71837 */ }; - static struct gpio_keys_button button = { .code = KEY_POWER, .gpio = -1, @@ -41,8 +35,8 @@ static struct mfd_cell bd71837_mfd_cells[] = { .platform_data = &bd718xx_powerkey_data, .pdata_size = sizeof(bd718xx_powerkey_data), }, - { .name = "bd71837-clk", }, - { .name = "bd71837-pmic", }, + { .name = "bd718xx-clk", }, + { .name = "bd718xx-pmic", }, }; static const struct regmap_irq bd71837_irqs[] = { @@ -61,16 +55,16 @@ static struct regmap_irq_chip bd71837_irq_chip = { .num_irqs = ARRAY_SIZE(bd71837_irqs), .num_regs = 1, .irq_reg_stride = 1, - .status_base = BD71837_REG_IRQ, - .mask_base = BD71837_REG_MIRQ, - .ack_base = BD71837_REG_IRQ, + .status_base = BD718XX_REG_IRQ, + .mask_base = BD718XX_REG_MIRQ, + .ack_base = BD718XX_REG_IRQ, .init_ack_masked = true, .mask_invert = false, }; static const struct regmap_range pmic_status_range = { - .range_min = BD71837_REG_IRQ, - .range_max = BD71837_REG_POW_STATE, + .range_min = BD718XX_REG_IRQ, + .range_max = BD718XX_REG_POW_STATE, }; static const struct regmap_access_table volatile_regs = { @@ -82,7 +76,7 @@ static const struct regmap_config bd71837_regmap_config = { .reg_bits = 8, .val_bits = 8, .volatile_table = &volatile_regs, - .max_register = BD71837_MAX_REGISTER - 1, + .max_register = BD718XX_MAX_REGISTER - 1, .cache_type = REGCACHE_RBTREE, }; @@ -90,8 +84,12 @@ static int bd71837_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct bd71837 *bd71837; - int ret, i; - unsigned int val; + int ret; + + if (!i2c->irq) { + dev_err(&i2c->dev, "No IRQ configured\n"); + return -EINVAL; + } bd71837 = devm_kzalloc(&i2c->dev, sizeof(struct bd71837), GFP_KERNEL); @@ -99,12 +97,7 @@ static int bd71837_i2c_probe(struct i2c_client *i2c, return -ENOMEM; bd71837->chip_irq = i2c->irq; - - if (!bd71837->chip_irq) { - dev_err(&i2c->dev, "No IRQ configured\n"); - return -EINVAL; - } - + bd71837->chip_type = (unsigned int)of_device_get_match_data(&i2c->dev); bd71837->dev = &i2c->dev; dev_set_drvdata(&i2c->dev, bd71837); @@ -114,20 +107,6 @@ static int bd71837_i2c_probe(struct i2c_client *i2c, return PTR_ERR(bd71837->regmap); } - ret = regmap_read(bd71837->regmap, BD71837_REG_REV, &val); - if (ret) { - dev_err(&i2c->dev, "Read BD71837_REG_DEVICE failed\n"); - return ret; - } - for (i = 0; i < ARRAY_SIZE(supported_revisions); i++) - if (supported_revisions[i] == val) - break; - - if (i == ARRAY_SIZE(supported_revisions)) { - dev_err(&i2c->dev, "Unsupported chip revision\n"); - return -ENODEV; - } - ret = devm_regmap_add_irq_chip(&i2c->dev, bd71837->regmap, bd71837->chip_irq, IRQF_ONESHOT, 0, &bd71837_irq_chip, &bd71837->irq_data); @@ -138,7 +117,7 @@ static int bd71837_i2c_probe(struct i2c_client *i2c, /* Configure short press to 10 milliseconds */ ret = regmap_update_bits(bd71837->regmap, - BD71837_REG_PWRONCONFIG0, + BD718XX_REG_PWRONCONFIG0, BD718XX_PWRBTN_PRESS_DURATION_MASK, BD718XX_PWRBTN_SHORT_PRESS_10MS); if (ret) { @@ -149,7 +128,7 @@ static int bd71837_i2c_probe(struct i2c_client *i2c, /* Configure long press to 10 seconds */ ret = regmap_update_bits(bd71837->regmap, - BD71837_REG_PWRONCONFIG1, + BD718XX_REG_PWRONCONFIG1, BD718XX_PWRBTN_PRESS_DURATION_MASK, BD718XX_PWRBTN_LONG_PRESS_10S); @@ -179,7 +158,14 @@ static int bd71837_i2c_probe(struct i2c_client *i2c, } static const struct of_device_id bd71837_of_match[] = { - { .compatible = "rohm,bd71837", }, + { + .compatible = "rohm,bd71837", + .data = (void *)BD718XX_TYPE_BD71837, + }, + { + .compatible = "rohm,bd71847", + .data = (void *)BD718XX_TYPE_BD71847, + }, { } }; MODULE_DEVICE_TABLE(of, bd71837_of_match); diff --git a/drivers/regulator/bd71837-regulator.c b/drivers/regulator/bd71837-regulator.c index 4f4599acfebd..1dbba20ede3e 100644 --- a/drivers/regulator/bd71837-regulator.c +++ b/drivers/regulator/bd71837-regulator.c @@ -15,11 +15,11 @@ #include <linux/regulator/of_regulator.h> #include <linux/slab.h> -struct bd71837_pmic { - struct regulator_desc descs[BD71837_REGULATOR_CNT]; +struct bd718xx_pmic { + struct bd718xx_regulator_data *rdata; struct bd71837 *mfd; struct platform_device *pdev; - struct regulator_dev *rdev[BD71837_REGULATOR_CNT]; + struct regulator_dev *rdev[BD718XX_REGULATOR_AMOUNT]; }; /* @@ -33,7 +33,7 @@ struct bd71837_pmic { static int bd71837_buck1234_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) { - struct bd71837_pmic *pmic = rdev_get_drvdata(rdev); + struct bd718xx_pmic *pmic = rdev_get_drvdata(rdev); struct bd71837 *mfd = pmic->mfd; int id = rdev->desc->id; unsigned int ramp_value = BUCK_RAMPRATE_10P00MV; @@ -60,7 +60,7 @@ static int bd71837_buck1234_set_ramp_delay(struct regulator_dev *rdev, rdev->desc->name, ramp_delay); } - return regmap_update_bits(mfd->regmap, BD71837_REG_BUCK1_CTRL + id, + return regmap_update_bits(mfd->regmap, BD718XX_REG_BUCK1_CTRL + id, BUCK_RAMPRATE_MASK, ramp_value << 6); } @@ -69,7 +69,7 @@ static int bd71837_buck1234_set_ramp_delay(struct regulator_dev *rdev, * is changed. Hence we return -EBUSY for these if voltage is changed * when BUCK/LDO is enabled. */ -static int bd71837_set_voltage_sel_restricted(struct regulator_dev *rdev, +static int bd718xx_set_voltage_sel_restricted(struct regulator_dev *rdev, unsigned int sel) { if (regulator_is_enabled_regmap(rdev)) @@ -78,45 +78,45 @@ static int bd71837_set_voltage_sel_restricted(struct regulator_dev *rdev, return regulator_set_voltage_sel_regmap(rdev, sel); } -static struct regulator_ops bd71837_ldo_regulator_ops = { +static struct regulator_ops bd718xx_ldo_regulator_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, .list_voltage = regulator_list_voltage_linear_range, - .set_voltage_sel = bd71837_set_voltage_sel_restricted, + .set_voltage_sel = bd718xx_set_voltage_sel_restricted, .get_voltage_sel = regulator_get_voltage_sel_regmap, }; -static struct regulator_ops bd71837_ldo_regulator_nolinear_ops = { +static struct regulator_ops bd718xx_ldo_regulator_nolinear_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, .list_voltage = regulator_list_voltage_table, - .set_voltage_sel = bd71837_set_voltage_sel_restricted, + .set_voltage_sel = bd718xx_set_voltage_sel_restricted, .get_voltage_sel = regulator_get_voltage_sel_regmap, }; -static struct regulator_ops bd71837_buck_regulator_ops = { +static struct regulator_ops bd718xx_buck_regulator_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, .list_voltage = regulator_list_voltage_linear_range, - .set_voltage_sel = bd71837_set_voltage_sel_restricted, + .set_voltage_sel = bd718xx_set_voltage_sel_restricted, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_time_sel = regulator_set_voltage_time_sel, }; -static struct regulator_ops bd71837_buck_regulator_nolinear_ops = { +static struct regulator_ops bd718xx_buck_regulator_nolinear_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, .list_voltage = regulator_list_voltage_table, - .set_voltage_sel = bd71837_set_voltage_sel_restricted, + .set_voltage_sel = bd718xx_set_voltage_sel_restricted, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_time_sel = regulator_set_voltage_time_sel, }; -static struct regulator_ops bd71837_buck1234_regulator_ops = { +static struct regulator_ops bd718xx_dvs_buck_regulator_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, @@ -128,24 +128,30 @@ static struct regulator_ops bd71837_buck1234_regulator_ops = { }; /* - * BUCK1/2/3/4 + * BD71837 BUCK1/2/3/4 + * BD71847 BUCK1/2 * 0.70 to 1.30V (10mV step) */ -static const struct regulator_linear_range bd71837_buck1234_voltage_ranges[] = { +static const struct regulator_linear_range bd718xx_dvs_buck_volts[] = { REGULATOR_LINEAR_RANGE(700000, 0x00, 0x3C, 10000), REGULATOR_LINEAR_RANGE(1300000, 0x3D, 0x3F, 0), }; /* - * BUCK5 - * 0.9V to 1.35V () + * BD71837 BUCK5 + * BD71847 BUCK3 + * 0.7V to 1.35V () */ -static const struct regulator_linear_range bd71837_buck5_voltage_ranges[] = { +static const struct regulator_linear_range bd718xx_1st_nodvs_buck_volts[] = { REGULATOR_LINEAR_RANGE(700000, 0x00, 0x03, 100000), REGULATOR_LINEAR_RANGE(1050000, 0x04, 0x05, 50000), REGULATOR_LINEAR_RANGE(1200000, 0x06, 0x07, 150000), }; +static const struct regulator_linear_range bd71847_buck4_voltage_ranges[] = { + REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000), +}; + /* * BUCK6 * 3.0V to 3.3V (step 100mV) @@ -155,7 +161,8 @@ static const struct regulator_linear_range bd71837_buck6_voltage_ranges[] = { }; /* - * BUCK7 + * BD71837 BUCK7 + * BD71847 BUCK5 * 000 = 1.605V * 001 = 1.695V * 010 = 1.755V @@ -165,7 +172,7 @@ static const struct regulator_linear_range bd71837_buck6_voltage_ranges[] = { * 110 = 1.95V * 111 = 1.995V */ -static const unsigned int buck_7_volts[] = { +static const unsigned int bd718xx_3rd_nodvs_buck_volts[] = { 1605000, 1695000, 1755000, 1800000, 1845000, 1905000, 1950000, 1995000 }; @@ -173,16 +180,15 @@ static const unsigned int buck_7_volts[] = { * BUCK8 * 0.8V to 1.40V (step 10mV) */ -static const struct regulator_linear_range bd71837_buck8_voltage_ranges[] = { +static const struct regulator_linear_range bd718xx_4th_nodvs_buck_volts[] = { REGULATOR_LINEAR_RANGE(800000, 0x00, 0x3C, 10000), - REGULATOR_LINEAR_RANGE(1400000, 0x3D, 0x3F, 0), }; /* * LDO1 * 3.0 to 3.3V (100mV step) */ -static const struct regulator_linear_range bd71837_ldo1_voltage_ranges[] = { +static const struct regulator_linear_range bd718xx_ldo1_volts[] = { REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000), }; @@ -198,7 +204,7 @@ static const unsigned int ldo_2_volts[] = { * LDO3 * 1.8 to 3.3V (100mV step) */ -static const struct regulator_linear_range bd71837_ldo3_voltage_ranges[] = { +static const struct regulator_linear_range bd718xx_ldo3_volts[] = { REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000), }; @@ -206,16 +212,15 @@ static const struct regulator_linear_range bd71837_ldo3_voltage_ranges[] = { * LDO4 * 0.9 to 1.8V (100mV step) */ -static const struct regulator_linear_range bd71837_ldo4_voltage_ranges[] = { +static const struct regulator_linear_range bd718xx_ldo4_volts[] = { REGULATOR_LINEAR_RANGE(900000, 0x00, 0x09, 100000), - REGULATOR_LINEAR_RANGE(1800000, 0x0A, 0x0F, 0), }; /* - * LDO5 + * LDO5 for BD71837 * 1.8 to 3.3V (100mV step) */ -static const struct regulator_linear_range bd71837_ldo5_voltage_ranges[] = { +static const struct regulator_linear_range bd718xx_ldo5_volts[] = { REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000), }; @@ -223,330 +228,722 @@ static const struct regulator_linear_range bd71837_ldo5_voltage_ranges[] = { * LDO6 * 0.9 to 1.8V (100mV step) */ -static const struct regulator_linear_range bd71837_ldo6_voltage_ranges[] = { +static const struct regulator_linear_range bd718xx_ldo6_volts[] = { REGULATOR_LINEAR_RANGE(900000, 0x00, 0x09, 100000), - REGULATOR_LINEAR_RANGE(1800000, 0x0A, 0x0F, 0), }; /* * LDO7 * 1.8 to 3.3V (100mV step) */ -static const struct regulator_linear_range bd71837_ldo7_voltage_ranges[] = { +static const struct regulator_linear_range bd71837_ldo7_volts[] = { REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000), }; -static const struct regulator_desc bd71837_regulators[] = { +struct reg_init { + unsigned int reg; + unsigned int mask; + unsigned int val; +}; +struct bd718xx_regulator_data { + struct regulator_desc desc; + const struct reg_init init; + const struct reg_init *additional_inits; + int additional_init_amnt; +}; + +/* + * There is a HW quirk in BD71837. The shutdown sequence timings for + * bucks/LDOs which are controlled via register interface are changed. + * At PMIC poweroff the voltage for BUCK6/7 is cut immediately at the + * beginning of shut-down sequence. As bucks 6 and 7 are parent + * supplies for LDO5 and LDO6 - this causes LDO5/6 voltage + * monitoring to errorneously detect under voltage and force PMIC to + * emergency state instead of poweroff. In order to avoid this we + * disable voltage monitoring for LDO5 and LDO6 + */ +static const struct reg_init bd71837_ldo5_inits[] = { + { + .reg = BD718XX_REG_MVRFLTMASK2, + .mask = BD718XX_LDO5_VRMON80, + .val = BD718XX_LDO5_VRMON80, + }, +}; + +static const struct reg_init bd71837_ldo6_inits[] = { + { + .reg = BD718XX_REG_MVRFLTMASK2, + .mask = BD718XX_LDO6_VRMON80, + .val = BD718XX_LDO6_VRMON80, + }, +}; + +static const struct bd718xx_regulator_data bd71847_regulators[] = { + { + .desc = { + .name = "buck1", + .of_match = of_match_ptr("BUCK1"), + .regulators_node = of_match_ptr("regulators"), + .id = BD718XX_BUCK1, + .ops = &bd718xx_dvs_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD718XX_DVS_BUCK_VOLTAGE_NUM, + .linear_ranges = bd718xx_dvs_buck_volts, + .n_linear_ranges = + ARRAY_SIZE(bd718xx_dvs_buck_volts), + .vsel_reg = BD718XX_REG_BUCK1_VOLT_RUN, + .vsel_mask = DVS_BUCK_RUN_MASK, + .enable_reg = BD718XX_REG_BUCK1_CTRL, + .enable_mask = BD718XX_BUCK_EN, + .owner = THIS_MODULE, + }, + .init = { + .reg = BD718XX_REG_BUCK1_CTRL, + .mask = BD718XX_BUCK_SEL, + .val = BD718XX_BUCK_SEL, + }, + }, { - .name = "buck1", - .of_match = of_match_ptr("BUCK1"), - .regulators_node = of_match_ptr("regulators"), - .id = BD71837_BUCK1, - .ops = &bd71837_buck1234_regulator_ops, - .type = REGULATOR_VOLTAGE, - .n_voltages = BD71837_BUCK1_VOLTAGE_NUM, - .linear_ranges = bd71837_buck1234_voltage_ranges, - .n_linear_ranges = ARRAY_SIZE(bd71837_buck1234_voltage_ranges), - .vsel_reg = BD71837_REG_BUCK1_VOLT_RUN, - .vsel_mask = BUCK1_RUN_MASK, - .enable_reg = BD71837_REG_BUCK1_CTRL, - .enable_mask = BD71837_BUCK_EN, - .owner = THIS_MODULE, + .desc = { + .name = "buck2", + .of_match = of_match_ptr("BUCK2"), + .regulators_node = of_match_ptr("regulators"), + .id = BD718XX_BUCK2, + .ops = &bd718xx_dvs_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD718XX_DVS_BUCK_VOLTAGE_NUM, + .linear_ranges = bd718xx_dvs_buck_volts, + .n_linear_ranges = ARRAY_SIZE(bd718xx_dvs_buck_volts), + .vsel_reg = BD718XX_REG_BUCK2_VOLT_RUN, + .vsel_mask = DVS_BUCK_RUN_MASK, + .enable_reg = BD718XX_REG_BUCK2_CTRL, + .enable_mask = BD718XX_BUCK_EN, + .owner = THIS_MODULE, + }, + .init = { + .reg = BD718XX_REG_BUCK2_CTRL, + .mask = BD718XX_BUCK_SEL, + .val = BD718XX_BUCK_SEL, + }, }, { - .name = "buck2", - .of_match = of_match_ptr("BUCK2"), - .regulators_node = of_match_ptr("regulators"), - .id = BD71837_BUCK2, - .ops = &bd71837_buck1234_regulator_ops, - .type = REGULATOR_VOLTAGE, - .n_voltages = BD71837_BUCK2_VOLTAGE_NUM, - .linear_ranges = bd71837_buck1234_voltage_ranges, - .n_linear_ranges = ARRAY_SIZE(bd71837_buck1234_voltage_ranges), - .vsel_reg = BD71837_REG_BUCK2_VOLT_RUN, - .vsel_mask = BUCK2_RUN_MASK, - .enable_reg = BD71837_REG_BUCK2_CTRL, - .enable_mask = BD71837_BUCK_EN, - .owner = THIS_MODULE, + .desc = { + .name = "buck3", + .of_match = of_match_ptr("BUCK3"), + .regulators_node = of_match_ptr("regulators"), + .id = BD718XX_BUCK3, + .ops = &bd718xx_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD718XX_1ST_NODVS_BUCK_VOLTAGE_NUM, + .linear_ranges = bd718xx_1st_nodvs_buck_volts, + .n_linear_ranges = + ARRAY_SIZE(bd718xx_1st_nodvs_buck_volts), + .vsel_reg = BD718XX_REG_1ST_NODVS_BUCK_VOLT, + .vsel_mask = BD718XX_1ST_NODVS_BUCK_MASK, + .enable_reg = BD718XX_REG_1ST_NODVS_BUCK_CTRL, + .enable_mask = BD718XX_BUCK_EN, + .owner = THIS_MODULE, + }, + .init = { + .reg = BD718XX_REG_1ST_NODVS_BUCK_CTRL, + .mask = BD718XX_BUCK_SEL, + .val = BD718XX_BUCK_SEL, + }, }, { - .name = "buck3", - .of_match = of_match_ptr("BUCK3"), - .regulators_node = of_match_ptr("regulators"), - .id = BD71837_BUCK3, - .ops = &bd71837_buck1234_regulator_ops, - .type = REGULATOR_VOLTAGE, - .n_voltages = BD71837_BUCK3_VOLTAGE_NUM, - .linear_ranges = bd71837_buck1234_voltage_ranges, - .n_linear_ranges = ARRAY_SIZE(bd71837_buck1234_voltage_ranges), - .vsel_reg = BD71837_REG_BUCK3_VOLT_RUN, - .vsel_mask = BUCK3_RUN_MASK, - .enable_reg = BD71837_REG_BUCK3_CTRL, - .enable_mask = BD71837_BUCK_EN, - .owner = THIS_MODULE, + .desc = { + .name = "buck4", + .of_match = of_match_ptr("BUCK4"), + .regulators_node = of_match_ptr("regulators"), + .id = BD718XX_BUCK4, + .ops = &bd718xx_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD71847_BUCK4_VOLTAGE_NUM, + .linear_ranges = bd71847_buck4_voltage_ranges, + .n_linear_ranges = + ARRAY_SIZE(bd71847_buck4_voltage_ranges), + .enable_reg = BD718XX_REG_2ND_NODVS_BUCK_CTRL, + .vsel_reg = BD718XX_REG_2ND_NODVS_BUCK_VOLT, + .vsel_mask = BD71847_BUCK4_MASK, + .enable_mask = BD718XX_BUCK_EN, + .owner = THIS_MODULE, + }, + .init = { + .reg = BD718XX_REG_2ND_NODVS_BUCK_CTRL, + .mask = BD718XX_BUCK_SEL, + .val = BD718XX_BUCK_SEL, + }, }, { - .name = "buck4", - .of_match = of_match_ptr("BUCK4"), - .regulators_node = of_match_ptr("regulators"), - .id = BD71837_BUCK4, - .ops = &bd71837_buck1234_regulator_ops, - .type = REGULATOR_VOLTAGE, - .n_voltages = BD71837_BUCK4_VOLTAGE_NUM, - .linear_ranges = bd71837_buck1234_voltage_ranges, - .n_linear_ranges = ARRAY_SIZE(bd71837_buck1234_voltage_ranges), - .vsel_reg = BD71837_REG_BUCK4_VOLT_RUN, - .vsel_mask = BUCK4_RUN_MASK, - .enable_reg = BD71837_REG_BUCK4_CTRL, - .enable_mask = BD71837_BUCK_EN, - .owner = THIS_MODULE, + .desc = { + .name = "buck5", + .of_match = of_match_ptr("BUCK5"), + .regulators_node = of_match_ptr("regulators"), + .id = BD718XX_BUCK5, + .ops = &bd718xx_buck_regulator_nolinear_ops, + .type = REGULATOR_VOLTAGE, + .volt_table = &bd718xx_3rd_nodvs_buck_volts[0], + .n_voltages = ARRAY_SIZE(bd718xx_3rd_nodvs_buck_volts), + .vsel_reg = BD718XX_REG_3RD_NODVS_BUCK_VOLT, + .vsel_mask = BD718XX_3RD_NODVS_BUCK_MASK, + .enable_reg = BD718XX_REG_3RD_NODVS_BUCK_CTRL, + .enable_mask = BD718XX_BUCK_EN, + .owner = THIS_MODULE, + }, + .init = { + .reg = BD718XX_REG_3RD_NODVS_BUCK_CTRL, + .mask = BD718XX_BUCK_SEL, + .val = BD718XX_BUCK_SEL, + }, }, { - .name = "buck5", - .of_match = of_match_ptr("BUCK5"), - .regulators_node = of_match_ptr("regulators"), - .id = BD71837_BUCK5, - .ops = &bd71837_buck_regulator_ops, - .type = REGULATOR_VOLTAGE, - .n_voltages = BD71837_BUCK5_VOLTAGE_NUM, - .linear_ranges = bd71837_buck5_voltage_ranges, - .n_linear_ranges = ARRAY_SIZE(bd71837_buck5_voltage_ranges), - .vsel_reg = BD71837_REG_BUCK5_VOLT, - .vsel_mask = BUCK5_MASK, - .enable_reg = BD71837_REG_BUCK5_CTRL, - .enable_mask = BD71837_BUCK_EN, - .owner = THIS_MODULE, + .desc = { + .name = "buck6", + .of_match = of_match_ptr("BUCK6"), + .regulators_node = of_match_ptr("regulators"), + .id = BD718XX_BUCK6, + .ops = &bd718xx_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD71837_4TH_NODVS_BUCK_VOLTAGE_NUM, + .linear_ranges = bd718xx_4th_nodvs_buck_volts, + .n_linear_ranges = + ARRAY_SIZE(bd718xx_4th_nodvs_buck_volts), + .vsel_reg = BD718XX_REG_4TH_NODVS_BUCK_VOLT, + .vsel_mask = BD718XX_4TH_NODVS_BUCK_MASK, + .enable_reg = BD718XX_REG_4TH_NODVS_BUCK_CTRL, + .enable_mask = BD718XX_BUCK_EN, + .owner = THIS_MODULE, + }, + .init = { + .reg = BD718XX_REG_4TH_NODVS_BUCK_CTRL, + .mask = BD718XX_BUCK_SEL, + .val = BD718XX_BUCK_SEL, + }, }, { - .name = "buck6", - .of_match = of_match_ptr("BUCK6"), - .regulators_node = of_match_ptr("regulators"), - .id = BD71837_BUCK6, - .ops = &bd71837_buck_regulator_ops, - .type = REGULATOR_VOLTAGE, - .n_voltages = BD71837_BUCK6_VOLTAGE_NUM, - .linear_ranges = bd71837_buck6_voltage_ranges, - .n_linear_ranges = ARRAY_SIZE(bd71837_buck6_voltage_ranges), - .vsel_reg = BD71837_REG_BUCK6_VOLT, - .vsel_mask = BUCK6_MASK, - .enable_reg = BD71837_REG_BUCK6_CTRL, - .enable_mask = BD71837_BUCK_EN, - .owner = THIS_MODULE, + .desc = { + .name = "ldo1", + .of_match = of_match_ptr("LDO1"), + .regulators_node = of_match_ptr("regulators"), + .id = BD718XX_LDO1, + .ops = &bd718xx_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD718XX_LDO1_VOLTAGE_NUM, + .linear_ranges = bd718xx_ldo1_volts, + .n_linear_ranges = ARRAY_SIZE(bd718xx_ldo1_volts), + .vsel_reg = BD718XX_REG_LDO1_VOLT, + .vsel_mask = BD718XX_LDO1_MASK, + .enable_reg = BD718XX_REG_LDO1_VOLT, + .enable_mask = BD718XX_LDO_EN, + .owner = THIS_MODULE, + }, + .init = { + .reg = BD718XX_REG_LDO1_VOLT, + .mask = BD718XX_LDO_SEL, + .val = BD718XX_LDO_SEL, + }, }, { - .name = "buck7", - .of_match = of_match_ptr("BUCK7"), - .regulators_node = of_match_ptr("regulators"), - .id = BD71837_BUCK7, - .ops = &bd71837_buck_regulator_nolinear_ops, - .type = REGULATOR_VOLTAGE, - .volt_table = &buck_7_volts[0], - .n_voltages = ARRAY_SIZE(buck_7_volts), - .vsel_reg = BD71837_REG_BUCK7_VOLT, - .vsel_mask = BUCK7_MASK, - .enable_reg = BD71837_REG_BUCK7_CTRL, - .enable_mask = BD71837_BUCK_EN, - .owner = THIS_MODULE, + .desc = { + .name = "ldo2", + .of_match = of_match_ptr("LDO2"), + .regulators_node = of_match_ptr("regulators"), + .id = BD718XX_LDO2, + .ops = &bd718xx_ldo_regulator_nolinear_ops, + .type = REGULATOR_VOLTAGE, + .volt_table = &ldo_2_volts[0], + .vsel_reg = BD718XX_REG_LDO2_VOLT, + .vsel_mask = BD718XX_LDO2_MASK, + .n_voltages = ARRAY_SIZE(ldo_2_volts), + .enable_reg = BD718XX_REG_LDO2_VOLT, + .enable_mask = BD718XX_LDO_EN, + .owner = THIS_MODULE, + }, + .init = { + .reg = BD718XX_REG_LDO2_VOLT, + .mask = BD718XX_LDO_SEL, + .val = BD718XX_LDO_SEL, + }, }, { - .name = "buck8", - .of_match = of_match_ptr("BUCK8"), - .regulators_node = of_match_ptr("regulators"), - .id = BD71837_BUCK8, - .ops = &bd71837_buck_regulator_ops, - .type = REGULATOR_VOLTAGE, - .n_voltages = BD71837_BUCK8_VOLTAGE_NUM, - .linear_ranges = bd71837_buck8_voltage_ranges, - .n_linear_ranges = ARRAY_SIZE(bd71837_buck8_voltage_ranges), - .vsel_reg = BD71837_REG_BUCK8_VOLT, - .vsel_mask = BUCK8_MASK, - .enable_reg = BD71837_REG_BUCK8_CTRL, - .enable_mask = BD71837_BUCK_EN, - .owner = THIS_MODULE, + .desc = { + .name = "ldo3", + .of_match = of_match_ptr("LDO3"), + .regulators_node = of_match_ptr("regulators"), + .id = BD718XX_LDO3, + .ops = &bd718xx_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD718XX_LDO3_VOLTAGE_NUM, + .linear_ranges = bd718xx_ldo3_volts, + .n_linear_ranges = ARRAY_SIZE(bd718xx_ldo3_volts), + .vsel_reg = BD718XX_REG_LDO3_VOLT, + .vsel_mask = BD718XX_LDO3_MASK, + .enable_reg = BD718XX_REG_LDO3_VOLT, + .enable_mask = BD718XX_LDO_EN, + .owner = THIS_MODULE, + }, + .init = { + .reg = BD718XX_REG_LDO3_VOLT, + .mask = BD718XX_LDO_SEL, + .val = BD718XX_LDO_SEL, + }, }, { - .name = "ldo1", - .of_match = of_match_ptr("LDO1"), - .regulators_node = of_match_ptr("regulators"), - .id = BD71837_LDO1, - .ops = &bd71837_ldo_regulator_ops, - .type = REGULATOR_VOLTAGE, - .n_voltages = BD71837_LDO1_VOLTAGE_NUM, - .linear_ranges = bd71837_ldo1_voltage_ranges, - .n_linear_ranges = ARRAY_SIZE(bd71837_ldo1_voltage_ranges), - .vsel_reg = BD71837_REG_LDO1_VOLT, - .vsel_mask = LDO1_MASK, - .enable_reg = BD71837_REG_LDO1_VOLT, - .enable_mask = BD71837_LDO_EN, - .owner = THIS_MODULE, + .desc = { + .name = "ldo4", + .of_match = of_match_ptr("LDO4"), + .regulators_node = of_match_ptr("regulators"), + .id = BD718XX_LDO4, + .ops = &bd718xx_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD718XX_LDO4_VOLTAGE_NUM, + .linear_ranges = bd718xx_ldo4_volts, + .n_linear_ranges = ARRAY_SIZE(bd718xx_ldo4_volts), + .vsel_reg = BD718XX_REG_LDO4_VOLT, + .vsel_mask = BD718XX_LDO4_MASK, + .enable_reg = BD718XX_REG_LDO4_VOLT, + .enable_mask = BD718XX_LDO_EN, + .owner = THIS_MODULE, + }, + .init = { + .reg = BD718XX_REG_LDO4_VOLT, + .mask = BD718XX_LDO_SEL, + .val = BD718XX_LDO_SEL, + }, }, { - .name = "ldo2", - .of_match = of_match_ptr("LDO2"), - .regulators_node = of_match_ptr("regulators"), - .id = BD71837_LDO2, - .ops = &bd71837_ldo_regulator_nolinear_ops, - .type = REGULATOR_VOLTAGE, - .volt_table = &ldo_2_volts[0], - .n_voltages = ARRAY_SIZE(ldo_2_volts), - .vsel_reg = BD71837_REG_LDO2_VOLT, - .vsel_mask = LDO2_MASK, - .enable_reg = BD71837_REG_LDO2_VOLT, - .enable_mask = BD71837_LDO_EN, - .owner = THIS_MODULE, + .desc = { + .name = "ldo5", + .of_match = of_match_ptr("LDO5"), + .regulators_node = of_match_ptr("regulators"), + .id = BD718XX_LDO5, + .ops = &bd718xx_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD718XX_LDO5_VOLTAGE_NUM, + .linear_ranges = bd718xx_ldo5_volts, + .n_linear_ranges = ARRAY_SIZE(bd718xx_ldo5_volts), + .vsel_reg = BD718XX_REG_LDO5_VOLT, + .vsel_mask = BD71847_LDO5_MASK, + .enable_reg = BD718XX_REG_LDO5_VOLT, + .enable_mask = BD718XX_LDO_EN, + .owner = THIS_MODULE, + }, + .init = { + .reg = BD718XX_REG_LDO5_VOLT, + .mask = BD718XX_LDO_SEL, + .val = BD718XX_LDO_SEL, + }, }, { - .name = "ldo3", - .of_match = of_match_ptr("LDO3"), - .regulators_node = of_match_ptr("regulators"), - .id = BD71837_LDO3, - .ops = &bd71837_ldo_regulator_ops, - .type = REGULATOR_VOLTAGE, - .n_voltages = BD71837_LDO3_VOLTAGE_NUM, - .linear_ranges = bd71837_ldo3_voltage_ranges, - .n_linear_ranges = ARRAY_SIZE(bd71837_ldo3_voltage_ranges), - .vsel_reg = BD71837_REG_LDO3_VOLT, - .vsel_mask = LDO3_MASK, - .enable_reg = BD71837_REG_LDO3_VOLT, - .enable_mask = BD71837_LDO_EN, - .owner = THIS_MODULE, + .desc = { + .name = "ldo6", + .of_match = of_match_ptr("LDO6"), + .regulators_node = of_match_ptr("regulators"), + .id = BD718XX_LDO6, + .ops = &bd718xx_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD718XX_LDO6_VOLTAGE_NUM, + .linear_ranges = bd718xx_ldo6_volts, + .n_linear_ranges = ARRAY_SIZE(bd718xx_ldo6_volts), + /* LDO6 is supplied by buck5 */ + .supply_name = "buck5", + .vsel_reg = BD718XX_REG_LDO6_VOLT, + .vsel_mask = BD718XX_LDO6_MASK, + .enable_reg = BD718XX_REG_LDO6_VOLT, + .enable_mask = BD718XX_LDO_EN, + .owner = THIS_MODULE, + }, + .init = { + .reg = BD718XX_REG_LDO6_VOLT, + .mask = BD718XX_LDO_SEL, + .val = BD718XX_LDO_SEL, + }, + }, +}; + +static const struct bd718xx_regulator_data bd71837_regulators[] = { + { + .desc = { + .name = "buck1", + .of_match = of_match_ptr("BUCK1"), + .regulators_node = of_match_ptr("regulators"), + .id = BD718XX_BUCK1, + .ops = &bd718xx_dvs_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD718XX_DVS_BUCK_VOLTAGE_NUM, + .linear_ranges = bd718xx_dvs_buck_volts, + .n_linear_ranges = ARRAY_SIZE(bd718xx_dvs_buck_volts), + .vsel_reg = BD718XX_REG_BUCK1_VOLT_RUN, + .vsel_mask = DVS_BUCK_RUN_MASK, + .enable_reg = BD718XX_REG_BUCK1_CTRL, + .enable_mask = BD718XX_BUCK_EN, + .owner = THIS_MODULE, + }, + .init = { + .reg = BD718XX_REG_BUCK1_CTRL, + .mask = BD718XX_BUCK_SEL, + .val = BD718XX_BUCK_SEL, + }, + }, + { + .desc = { + .name = "buck2", + .of_match = of_match_ptr("BUCK2"), + .regulators_node = of_match_ptr("regulators"), + .id = BD718XX_BUCK2, + .ops = &bd718xx_dvs_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD718XX_DVS_BUCK_VOLTAGE_NUM, + .linear_ranges = bd718xx_dvs_buck_volts, + .n_linear_ranges = ARRAY_SIZE(bd718xx_dvs_buck_volts), + .vsel_reg = BD718XX_REG_BUCK2_VOLT_RUN, + .vsel_mask = DVS_BUCK_RUN_MASK, + .enable_reg = BD718XX_REG_BUCK2_CTRL, + .enable_mask = BD718XX_BUCK_EN, + .owner = THIS_MODULE, + }, + .init = { + .reg = BD718XX_REG_BUCK2_CTRL, + .mask = BD718XX_BUCK_SEL, + .val = BD718XX_BUCK_SEL, + }, + }, + { + .desc = { + .name = "buck3", + .of_match = of_match_ptr("BUCK3"), + .regulators_node = of_match_ptr("regulators"), + .id = BD718XX_BUCK3, + .ops = &bd718xx_dvs_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD718XX_DVS_BUCK_VOLTAGE_NUM, + .linear_ranges = bd718xx_dvs_buck_volts, + .n_linear_ranges = ARRAY_SIZE(bd718xx_dvs_buck_volts), + .vsel_reg = BD71837_REG_BUCK3_VOLT_RUN, + .vsel_mask = DVS_BUCK_RUN_MASK, + .enable_reg = BD71837_REG_BUCK3_CTRL, + .enable_mask = BD718XX_BUCK_EN, + .owner = THIS_MODULE, + }, + .init = { + .reg = BD71837_REG_BUCK3_CTRL, + .mask = BD718XX_BUCK_SEL, + .val = BD718XX_BUCK_SEL, + }, + }, + { + .desc = { + .name = "buck4", + .of_match = of_match_ptr("BUCK4"), + .regulators_node = of_match_ptr("regulators"), + .id = BD718XX_BUCK4, + .ops = &bd718xx_dvs_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD718XX_DVS_BUCK_VOLTAGE_NUM, + .linear_ranges = bd718xx_dvs_buck_volts, + .n_linear_ranges = ARRAY_SIZE(bd718xx_dvs_buck_volts), + .vsel_reg = BD71837_REG_BUCK4_VOLT_RUN, + .vsel_mask = DVS_BUCK_RUN_MASK, + .enable_reg = BD71837_REG_BUCK4_CTRL, + .enable_mask = BD718XX_BUCK_EN, + .owner = THIS_MODULE, + }, + .init = { + .reg = BD71837_REG_BUCK4_CTRL, + .mask = BD718XX_BUCK_SEL, + .val = BD718XX_BUCK_SEL, + }, }, { - .name = "ldo4", - .of_match = of_match_ptr("LDO4"), - .regulators_node = of_match_ptr("regulators"), - .id = BD71837_LDO4, - .ops = &bd71837_ldo_regulator_ops, - .type = REGULATOR_VOLTAGE, - .n_voltages = BD71837_LDO4_VOLTAGE_NUM, - .linear_ranges = bd71837_ldo4_voltage_ranges, - .n_linear_ranges = ARRAY_SIZE(bd71837_ldo4_voltage_ranges), - .vsel_reg = BD71837_REG_LDO4_VOLT, - .vsel_mask = LDO4_MASK, - .enable_reg = BD71837_REG_LDO4_VOLT, - .enable_mask = BD71837_LDO_EN, - .owner = THIS_MODULE, + .desc = { + .name = "buck5", + .of_match = of_match_ptr("BUCK5"), + .regulators_node = of_match_ptr("regulators"), + .id = BD718XX_BUCK5, + .ops = &bd718xx_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD718XX_1ST_NODVS_BUCK_VOLTAGE_NUM, + .linear_ranges = bd718xx_1st_nodvs_buck_volts, + .n_linear_ranges = + ARRAY_SIZE(bd718xx_1st_nodvs_buck_volts), + .vsel_reg = BD718XX_REG_1ST_NODVS_BUCK_VOLT, + .vsel_mask = BD718XX_1ST_NODVS_BUCK_MASK, + .enable_reg = BD718XX_REG_1ST_NODVS_BUCK_CTRL, + .enable_mask = BD718XX_BUCK_EN, + .owner = THIS_MODULE, + }, + .init = { + .reg = BD718XX_REG_1ST_NODVS_BUCK_CTRL, + .mask = BD718XX_BUCK_SEL, + .val = BD718XX_BUCK_SEL, + }, }, { - .name = "ldo5", - .of_match = of_match_ptr("LDO5"), - .regulators_node = of_match_ptr("regulators"), - .id = BD71837_LDO5, - .ops = &bd71837_ldo_regulator_ops, - .type = REGULATOR_VOLTAGE, - .n_voltages = BD71837_LDO5_VOLTAGE_NUM, - .linear_ranges = bd71837_ldo5_voltage_ranges, - .n_linear_ranges = ARRAY_SIZE(bd71837_ldo5_voltage_ranges), - /* LDO5 is supplied by buck6 */ - .supply_name = "buck6", - .vsel_reg = BD71837_REG_LDO5_VOLT, - .vsel_mask = LDO5_MASK, - .enable_reg = BD71837_REG_LDO5_VOLT, - .enable_mask = BD71837_LDO_EN, - .owner = THIS_MODULE, + .desc = { + .name = "buck6", + .of_match = of_match_ptr("BUCK6"), + .regulators_node = of_match_ptr("regulators"), + .id = BD718XX_BUCK6, + .ops = &bd718xx_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD71837_BUCK6_VOLTAGE_NUM, + .linear_ranges = bd71837_buck6_voltage_ranges, + .n_linear_ranges = + ARRAY_SIZE(bd71837_buck6_voltage_ranges), + .vsel_reg = BD718XX_REG_2ND_NODVS_BUCK_VOLT, + .vsel_mask = BD71837_BUCK6_MASK, + .enable_reg = BD718XX_REG_2ND_NODVS_BUCK_CTRL, + .enable_mask = BD718XX_BUCK_EN, + .owner = THIS_MODULE, + }, + .init = { + .reg = BD718XX_REG_2ND_NODVS_BUCK_CTRL, + .mask = BD718XX_BUCK_SEL, + .val = BD718XX_BUCK_SEL, + }, }, { - .name = "ldo6", - .of_match = of_match_ptr("LDO6"), - .regulators_node = of_match_ptr("regulators"), - .id = BD71837_LDO6, - .ops = &bd71837_ldo_regulator_ops, - .type = REGULATOR_VOLTAGE, - .n_voltages = BD71837_LDO6_VOLTAGE_NUM, - .linear_ranges = bd71837_ldo6_voltage_ranges, - .n_linear_ranges = ARRAY_SIZE(bd71837_ldo6_voltage_ranges), - /* LDO6 is supplied by buck7 */ - .supply_name = "buck7", - .vsel_reg = BD71837_REG_LDO6_VOLT, - .vsel_mask = LDO6_MASK, - .enable_reg = BD71837_REG_LDO6_VOLT, - .enable_mask = BD71837_LDO_EN, - .owner = THIS_MODULE, + .desc = { + .name = "buck7", + .of_match = of_match_ptr("BUCK7"), + .regulators_node = of_match_ptr("regulators"), + .id = BD718XX_BUCK7, + .ops = &bd718xx_buck_regulator_nolinear_ops, + .type = REGULATOR_VOLTAGE, + .volt_table = &bd718xx_3rd_nodvs_buck_volts[0], + .n_voltages = ARRAY_SIZE(bd718xx_3rd_nodvs_buck_volts), + .vsel_reg = BD718XX_REG_3RD_NODVS_BUCK_VOLT, + .vsel_mask = BD718XX_3RD_NODVS_BUCK_MASK, + .enable_reg = BD718XX_REG_3RD_NODVS_BUCK_CTRL, + .enable_mask = BD718XX_BUCK_EN, + .owner = THIS_MODULE, + }, + .init = { + .reg = BD718XX_REG_3RD_NODVS_BUCK_CTRL, + .mask = BD718XX_BUCK_SEL, + .val = BD718XX_BUCK_SEL, + }, }, { - .name = "ldo7", - .of_match = of_match_ptr("LDO7"), - .regulators_node = of_match_ptr("regulators"), - .id = BD71837_LDO7, - .ops = &bd71837_ldo_regulator_ops, - .type = REGULATOR_VOLTAGE, - .n_voltages = BD71837_LDO7_VOLTAGE_NUM, - .linear_ranges = bd71837_ldo7_voltage_ranges, - .n_linear_ranges = ARRAY_SIZE(bd71837_ldo7_voltage_ranges), - .vsel_reg = BD71837_REG_LDO7_VOLT, - .vsel_mask = LDO7_MASK, - .enable_reg = BD71837_REG_LDO7_VOLT, - .enable_mask = BD71837_LDO_EN, - .owner = THIS_MODULE, + .desc = { + .name = "buck8", + .of_match = of_match_ptr("BUCK8"), + .regulators_node = of_match_ptr("regulators"), + .id = BD718XX_BUCK8, + .ops = &bd718xx_buck_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD71837_4TH_NODVS_BUCK_VOLTAGE_NUM, + .linear_ranges = bd718xx_4th_nodvs_buck_volts, + .n_linear_ranges = + ARRAY_SIZE(bd718xx_4th_nodvs_buck_volts), + .vsel_reg = BD718XX_REG_4TH_NODVS_BUCK_VOLT, + .vsel_mask = BD718XX_4TH_NODVS_BUCK_MASK, + .enable_reg = BD718XX_REG_4TH_NODVS_BUCK_CTRL, + .enable_mask = BD718XX_BUCK_EN, + .owner = THIS_MODULE, + }, + .init = { + .reg = BD718XX_REG_4TH_NODVS_BUCK_CTRL, + .mask = BD718XX_BUCK_SEL, + .val = BD718XX_BUCK_SEL, + }, + }, + { + .desc = { + .name = "ldo1", + .of_match = of_match_ptr("LDO1"), + .regulators_node = of_match_ptr("regulators"), + .id = BD718XX_LDO1, + .ops = &bd718xx_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD718XX_LDO1_VOLTAGE_NUM, + .linear_ranges = bd718xx_ldo1_volts, + .n_linear_ranges = ARRAY_SIZE(bd718xx_ldo1_volts), + .vsel_reg = BD718XX_REG_LDO1_VOLT, + .vsel_mask = BD718XX_LDO1_MASK, + .enable_reg = BD718XX_REG_LDO1_VOLT, + .enable_mask = BD718XX_LDO_EN, + .owner = THIS_MODULE, + }, + .init = { + .reg = BD718XX_REG_LDO1_VOLT, + .mask = BD718XX_LDO_SEL, + .val = BD718XX_LDO_SEL, + }, + }, + { + .desc = { + .name = "ldo2", + .of_match = of_match_ptr("LDO2"), + .regulators_node = of_match_ptr("regulators"), + .id = BD718XX_LDO2, + .ops = &bd718xx_ldo_regulator_nolinear_ops, + .type = REGULATOR_VOLTAGE, + .volt_table = &ldo_2_volts[0], + .vsel_reg = BD718XX_REG_LDO2_VOLT, + .vsel_mask = BD718XX_LDO2_MASK, + .n_voltages = ARRAY_SIZE(ldo_2_volts), + .enable_reg = BD718XX_REG_LDO2_VOLT, + .enable_mask = BD718XX_LDO_EN, + .owner = THIS_MODULE, + }, + .init = { + .reg = BD718XX_REG_LDO2_VOLT, + .mask = BD718XX_LDO_SEL, + .val = BD718XX_LDO_SEL, + }, + }, + { + .desc = { + .name = "ldo3", + .of_match = of_match_ptr("LDO3"), + .regulators_node = of_match_ptr("regulators"), + .id = BD718XX_LDO3, + .ops = &bd718xx_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD718XX_LDO3_VOLTAGE_NUM, + .linear_ranges = bd718xx_ldo3_volts, + .n_linear_ranges = ARRAY_SIZE(bd718xx_ldo3_volts), + .vsel_reg = BD718XX_REG_LDO3_VOLT, + .vsel_mask = BD718XX_LDO3_MASK, + .enable_reg = BD718XX_REG_LDO3_VOLT, + .enable_mask = BD718XX_LDO_EN, + .owner = THIS_MODULE, + }, + .init = { + .reg = BD718XX_REG_LDO3_VOLT, + .mask = BD718XX_LDO_SEL, + .val = BD718XX_LDO_SEL, + }, + }, + { + .desc = { + .name = "ldo4", + .of_match = of_match_ptr("LDO4"), + .regulators_node = of_match_ptr("regulators"), + .id = BD718XX_LDO4, + .ops = &bd718xx_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD718XX_LDO4_VOLTAGE_NUM, + .linear_ranges = bd718xx_ldo4_volts, + .n_linear_ranges = ARRAY_SIZE(bd718xx_ldo4_volts), + .vsel_reg = BD718XX_REG_LDO4_VOLT, + .vsel_mask = BD718XX_LDO4_MASK, + .enable_reg = BD718XX_REG_LDO4_VOLT, + .enable_mask = BD718XX_LDO_EN, + .owner = THIS_MODULE, + }, + .init = { + .reg = BD718XX_REG_LDO4_VOLT, + .mask = BD718XX_LDO_SEL, + .val = BD718XX_LDO_SEL, + }, + }, + { + .desc = { + .name = "ldo5", + .of_match = of_match_ptr("LDO5"), + .regulators_node = of_match_ptr("regulators"), + .id = BD718XX_LDO5, + .ops = &bd718xx_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD718XX_LDO5_VOLTAGE_NUM, + .linear_ranges = bd718xx_ldo5_volts, + .n_linear_ranges = ARRAY_SIZE(bd718xx_ldo5_volts), + /* LDO5 is supplied by buck6 */ + .supply_name = "buck6", + .vsel_reg = BD718XX_REG_LDO5_VOLT, + .vsel_mask = BD71837_LDO5_MASK, + .enable_reg = BD718XX_REG_LDO5_VOLT, + .enable_mask = BD718XX_LDO_EN, + .owner = THIS_MODULE, + }, + .init = { + .reg = BD718XX_REG_LDO5_VOLT, + .mask = BD718XX_LDO_SEL, + .val = BD718XX_LDO_SEL, + }, + .additional_inits = bd71837_ldo5_inits, + .additional_init_amnt = ARRAY_SIZE(bd71837_ldo5_inits), + }, + { + .desc = { + .name = "ldo6", + .of_match = of_match_ptr("LDO6"), + .regulators_node = of_match_ptr("regulators"), + .id = BD718XX_LDO6, + .ops = &bd718xx_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD718XX_LDO6_VOLTAGE_NUM, + .linear_ranges = bd718xx_ldo6_volts, + .n_linear_ranges = ARRAY_SIZE(bd718xx_ldo6_volts), + /* LDO6 is supplied by buck7 */ + .supply_name = "buck7", + .vsel_reg = BD718XX_REG_LDO6_VOLT, + .vsel_mask = BD718XX_LDO6_MASK, + .enable_reg = BD718XX_REG_LDO6_VOLT, + .enable_mask = BD718XX_LDO_EN, + .owner = THIS_MODULE, + }, + .init = { + .reg = BD718XX_REG_LDO6_VOLT, + .mask = BD718XX_LDO_SEL, + .val = BD718XX_LDO_SEL, + }, + .additional_inits = bd71837_ldo6_inits, + .additional_init_amnt = ARRAY_SIZE(bd71837_ldo6_inits), + }, + { + .desc = { + .name = "ldo7", + .of_match = of_match_ptr("LDO7"), + .regulators_node = of_match_ptr("regulators"), + .id = BD718XX_LDO7, + .ops = &bd718xx_ldo_regulator_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD71837_LDO7_VOLTAGE_NUM, + .linear_ranges = bd71837_ldo7_volts, + .n_linear_ranges = ARRAY_SIZE(bd71837_ldo7_volts), + .vsel_reg = BD71837_REG_LDO7_VOLT, + .vsel_mask = BD71837_LDO7_MASK, + .enable_reg = BD71837_REG_LDO7_VOLT, + .enable_mask = BD718XX_LDO_EN, + .owner = THIS_MODULE, + }, + .init = { + .reg = BD71837_REG_LDO7_VOLT, + .mask = BD718XX_LDO_SEL, + .val = BD718XX_LDO_SEL, + }, }, }; -struct reg_init { - unsigned int reg; - unsigned int mask; +struct bd718xx_pmic_inits { + const struct bd718xx_regulator_data (*r_datas)[]; + unsigned int r_amount; }; static int bd71837_probe(struct platform_device *pdev) { - struct bd71837_pmic *pmic; + struct bd718xx_pmic *pmic; struct regulator_config config = { 0 }; - struct reg_init pmic_regulator_inits[] = { - { - .reg = BD71837_REG_BUCK1_CTRL, - .mask = BD71837_BUCK_SEL, - }, { - .reg = BD71837_REG_BUCK2_CTRL, - .mask = BD71837_BUCK_SEL, - }, { - .reg = BD71837_REG_BUCK3_CTRL, - .mask = BD71837_BUCK_SEL, - }, { - .reg = BD71837_REG_BUCK4_CTRL, - .mask = BD71837_BUCK_SEL, - }, { - .reg = BD71837_REG_BUCK5_CTRL, - .mask = BD71837_BUCK_SEL, - }, { - .reg = BD71837_REG_BUCK6_CTRL, - .mask = BD71837_BUCK_SEL, - }, { - .reg = BD71837_REG_BUCK7_CTRL, - .mask = BD71837_BUCK_SEL, - }, { - .reg = BD71837_REG_BUCK8_CTRL, - .mask = BD71837_BUCK_SEL, - }, { - .reg = BD71837_REG_LDO1_VOLT, - .mask = BD71837_LDO_SEL, - }, { - .reg = BD71837_REG_LDO2_VOLT, - .mask = BD71837_LDO_SEL, - }, { - .reg = BD71837_REG_LDO3_VOLT, - .mask = BD71837_LDO_SEL, - }, { - .reg = BD71837_REG_LDO4_VOLT, - .mask = BD71837_LDO_SEL, - }, { - .reg = BD71837_REG_LDO5_VOLT, - .mask = BD71837_LDO_SEL, - }, { - .reg = BD71837_REG_LDO6_VOLT, - .mask = BD71837_LDO_SEL, - }, { - .reg = BD71837_REG_LDO7_VOLT, - .mask = BD71837_LDO_SEL, - } + struct bd718xx_pmic_inits pmic_regulators[] = { + [BD718XX_TYPE_BD71837] = { + .r_datas = &bd71837_regulators, + .r_amount = ARRAY_SIZE(bd71837_regulators), + }, + [BD718XX_TYPE_BD71847] = { + .r_datas = &bd71847_regulators, + .r_amount = ARRAY_SIZE(bd71847_regulators), + }, }; - int i, err; + int i, j, err; pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL); if (!pmic) return -ENOMEM; - memcpy(pmic->descs, bd71837_regulators, sizeof(pmic->descs)); - pmic->pdev = pdev; pmic->mfd = dev_get_drvdata(pdev->dev.parent); @@ -555,44 +952,34 @@ static int bd71837_probe(struct platform_device *pdev) err = -EINVAL; goto err; } + if (pmic->mfd->chip_type >= BD718XX_TYPE_AMOUNT || + !pmic_regulators[pmic->mfd->chip_type].r_datas) { + dev_err(&pdev->dev, "Unsupported chip type\n"); + err = -EINVAL; + goto err; + } + platform_set_drvdata(pdev, pmic); /* Register LOCK release */ - err = regmap_update_bits(pmic->mfd->regmap, BD71837_REG_REGLOCK, + err = regmap_update_bits(pmic->mfd->regmap, BD718XX_REG_REGLOCK, (REGLOCK_PWRSEQ | REGLOCK_VREG), 0); if (err) { dev_err(&pmic->pdev->dev, "Failed to unlock PMIC (%d)\n", err); goto err; } else { dev_dbg(&pmic->pdev->dev, "Unlocked lock register 0x%x\n", - BD71837_REG_REGLOCK); - } - - /* - * There is a HW quirk in BD71837. The shutdown sequence timings for - * bucks/LDOs which are controlled via register interface are changed. - * At PMIC poweroff the voltage for BUCK6/7 is cut immediately at the - * beginning of shut-down sequence. As bucks 6 and 7 are parent - * supplies for LDO5 and LDO6 - this causes LDO5/6 voltage - * monitoring to errorneously detect under voltage and force PMIC to - * emergency state instead of poweroff. In order to avoid this we - * disable voltage monitoring for LDO5 and LDO6 - */ - err = regmap_update_bits(pmic->mfd->regmap, BD718XX_REG_MVRFLTMASK2, - BD718XX_LDO5_VRMON80 | BD718XX_LDO6_VRMON80, - BD718XX_LDO5_VRMON80 | BD718XX_LDO6_VRMON80); - if (err) { - dev_err(&pmic->pdev->dev, - "Failed to disable voltage monitoring\n"); - goto err; + BD718XX_REG_REGLOCK); } - for (i = 0; i < ARRAY_SIZE(pmic_regulator_inits); i++) { + for (i = 0; i < pmic_regulators[pmic->mfd->chip_type].r_amount; i++) { - struct regulator_desc *desc; + const struct regulator_desc *desc; struct regulator_dev *rdev; + const struct bd718xx_regulator_data *r; - desc = &pmic->descs[i]; + r = &(*pmic_regulators[pmic->mfd->chip_type].r_datas)[i]; + desc = &r->desc; config.dev = pdev->dev.parent; config.driver_data = pmic; @@ -612,16 +999,26 @@ static int bd71837_probe(struct platform_device *pdev) * can now switch the control from PMIC state machine to the * register interface */ - err = regmap_update_bits(pmic->mfd->regmap, - pmic_regulator_inits[i].reg, - pmic_regulator_inits[i].mask, - 0xFFFFFFFF); + err = regmap_update_bits(pmic->mfd->regmap, r->init.reg, + r->init.mask, r->init.val); if (err) { dev_err(&pmic->pdev->dev, "Failed to write BUCK/LDO SEL bit for (%s)\n", desc->name); goto err; } + for (j = 0; j < r->additional_init_amnt; j++) { + err = regmap_update_bits(pmic->mfd->regmap, + r->additional_inits[j].reg, + r->additional_inits[j].mask, + r->additional_inits[j].val); + if (err) { + dev_err(&pmic->pdev->dev, + "Buck (%s) initialization failed\n", + desc->name); + goto err; + } + } pmic->rdev[i] = rdev; } @@ -632,7 +1029,7 @@ static int bd71837_probe(struct platform_device *pdev) static struct platform_driver bd71837_regulator = { .driver = { - .name = "bd71837-pmic", + .name = "bd718xx-pmic", }, .probe = bd71837_probe, }; diff --git a/include/linux/mfd/rohm-bd718x7.h b/include/linux/mfd/rohm-bd718x7.h index e8338e5dc10b..625e3607e069 100644 --- a/include/linux/mfd/rohm-bd718x7.h +++ b/include/linux/mfd/rohm-bd718x7.h @@ -7,106 +7,125 @@ #include <linux/regmap.h> enum { - BD71837_BUCK1 = 0, - BD71837_BUCK2, - BD71837_BUCK3, - BD71837_BUCK4, - BD71837_BUCK5, - BD71837_BUCK6, - BD71837_BUCK7, - BD71837_BUCK8, - BD71837_LDO1, - BD71837_LDO2, - BD71837_LDO3, - BD71837_LDO4, - BD71837_LDO5, - BD71837_LDO6, - BD71837_LDO7, - BD71837_REGULATOR_CNT, + BD718XX_TYPE_BD71837 = 0, + BD718XX_TYPE_BD71847, + BD718XX_TYPE_AMOUNT }; -#define BD71837_BUCK1_VOLTAGE_NUM 0x40 -#define BD71837_BUCK2_VOLTAGE_NUM 0x40 -#define BD71837_BUCK3_VOLTAGE_NUM 0x40 -#define BD71837_BUCK4_VOLTAGE_NUM 0x40 +enum { + BD718XX_BUCK1 = 0, + BD718XX_BUCK2, + BD718XX_BUCK3, + BD718XX_BUCK4, + BD718XX_BUCK5, + BD718XX_BUCK6, + BD718XX_BUCK7, + BD718XX_BUCK8, + BD718XX_LDO1, + BD718XX_LDO2, + BD718XX_LDO3, + BD718XX_LDO4, + BD718XX_LDO5, + BD718XX_LDO6, + BD718XX_LDO7, + BD718XX_REGULATOR_AMOUNT, +}; + +/* Common voltage configurations + * + * Note, we support only one range of voltages for each buck/LDO until we + * get pickable ranges support. (See range selection bits for BUCK5 and + * LDO1. On BD71847 also the second no DVS buck and LDO5) + */ + +#define BD718XX_DVS_BUCK_VOLTAGE_NUM 0x3D +#define BD718XX_1ST_NODVS_BUCK_VOLTAGE_NUM 0x08 +#define BD71837_4TH_NODVS_BUCK_VOLTAGE_NUM 0x3D + +#define BD718XX_LDO1_VOLTAGE_NUM 0x04 +#define BD718XX_LDO2_VOLTAGE_NUM 0x02 +#define BD718XX_LDO3_VOLTAGE_NUM 0x10 +#define BD718XX_LDO4_VOLTAGE_NUM 0x0A +#define BD718XX_LDO5_VOLTAGE_NUM 0x10 +#define BD718XX_LDO6_VOLTAGE_NUM 0x0A -#define BD71837_BUCK5_VOLTAGE_NUM 0x08 +/* BD71837 specific voltage configurations */ #define BD71837_BUCK6_VOLTAGE_NUM 0x04 #define BD71837_BUCK7_VOLTAGE_NUM 0x08 -#define BD71837_BUCK8_VOLTAGE_NUM 0x40 - -#define BD71837_LDO1_VOLTAGE_NUM 0x04 -#define BD71837_LDO2_VOLTAGE_NUM 0x02 -#define BD71837_LDO3_VOLTAGE_NUM 0x10 -#define BD71837_LDO4_VOLTAGE_NUM 0x10 -#define BD71837_LDO5_VOLTAGE_NUM 0x10 -#define BD71837_LDO6_VOLTAGE_NUM 0x10 #define BD71837_LDO7_VOLTAGE_NUM 0x10 +/* BD71847 specific voltage configurations */ +#define BD71847_BUCK4_VOLTAGE_NUM 0x04 + +/* Registers specific to BD71837 */ enum { - BD71837_REG_REV = 0x00, - BD71837_REG_SWRESET = 0x01, - BD71837_REG_I2C_DEV = 0x02, - BD71837_REG_PWRCTRL0 = 0x03, - BD71837_REG_PWRCTRL1 = 0x04, - BD71837_REG_BUCK1_CTRL = 0x05, - BD71837_REG_BUCK2_CTRL = 0x06, - BD71837_REG_BUCK3_CTRL = 0x07, - BD71837_REG_BUCK4_CTRL = 0x08, - BD71837_REG_BUCK5_CTRL = 0x09, - BD71837_REG_BUCK6_CTRL = 0x0A, - BD71837_REG_BUCK7_CTRL = 0x0B, - BD71837_REG_BUCK8_CTRL = 0x0C, - BD71837_REG_BUCK1_VOLT_RUN = 0x0D, - BD71837_REG_BUCK1_VOLT_IDLE = 0x0E, - BD71837_REG_BUCK1_VOLT_SUSP = 0x0F, - BD71837_REG_BUCK2_VOLT_RUN = 0x10, - BD71837_REG_BUCK2_VOLT_IDLE = 0x11, - BD71837_REG_BUCK3_VOLT_RUN = 0x12, - BD71837_REG_BUCK4_VOLT_RUN = 0x13, - BD71837_REG_BUCK5_VOLT = 0x14, - BD71837_REG_BUCK6_VOLT = 0x15, - BD71837_REG_BUCK7_VOLT = 0x16, - BD71837_REG_BUCK8_VOLT = 0x17, - BD71837_REG_LDO1_VOLT = 0x18, - BD71837_REG_LDO2_VOLT = 0x19, - BD71837_REG_LDO3_VOLT = 0x1A, - BD71837_REG_LDO4_VOLT = 0x1B, - BD71837_REG_LDO5_VOLT = 0x1C, - BD71837_REG_LDO6_VOLT = 0x1D, - BD71837_REG_LDO7_VOLT = 0x1E, - BD71837_REG_TRANS_COND0 = 0x1F, - BD71837_REG_TRANS_COND1 = 0x20, - BD71837_REG_VRFAULTEN = 0x21, - BD718XX_REG_MVRFLTMASK0 = 0x22, - BD718XX_REG_MVRFLTMASK1 = 0x23, - BD718XX_REG_MVRFLTMASK2 = 0x24, - BD71837_REG_RCVCFG = 0x25, - BD71837_REG_RCVNUM = 0x26, - BD71837_REG_PWRONCONFIG0 = 0x27, - BD71837_REG_PWRONCONFIG1 = 0x28, - BD71837_REG_RESETSRC = 0x29, - BD71837_REG_MIRQ = 0x2A, - BD71837_REG_IRQ = 0x2B, - BD71837_REG_IN_MON = 0x2C, - BD71837_REG_POW_STATE = 0x2D, - BD71837_REG_OUT32K = 0x2E, - BD71837_REG_REGLOCK = 0x2F, - BD71837_REG_OTPVER = 0xFF, - BD71837_MAX_REGISTER = 0x100, + BD71837_REG_BUCK3_CTRL = 0x07, + BD71837_REG_BUCK4_CTRL = 0x08, + BD71837_REG_BUCK3_VOLT_RUN = 0x12, + BD71837_REG_BUCK4_VOLT_RUN = 0x13, + BD71837_REG_LDO7_VOLT = 0x1E, +}; + +/* Registers common for BD71837 and BD71847 */ +enum { + BD718XX_REG_REV = 0x00, + BD718XX_REG_SWRESET = 0x01, + BD718XX_REG_I2C_DEV = 0x02, + BD718XX_REG_PWRCTRL0 = 0x03, + BD718XX_REG_PWRCTRL1 = 0x04, + BD718XX_REG_BUCK1_CTRL = 0x05, + BD718XX_REG_BUCK2_CTRL = 0x06, + BD718XX_REG_1ST_NODVS_BUCK_CTRL = 0x09, + BD718XX_REG_2ND_NODVS_BUCK_CTRL = 0x0A, + BD718XX_REG_3RD_NODVS_BUCK_CTRL = 0x0B, + BD718XX_REG_4TH_NODVS_BUCK_CTRL = 0x0C, + BD718XX_REG_BUCK1_VOLT_RUN = 0x0D, + BD718XX_REG_BUCK1_VOLT_IDLE = 0x0E, + BD718XX_REG_BUCK1_VOLT_SUSP = 0x0F, + BD718XX_REG_BUCK2_VOLT_RUN = 0x10, + BD718XX_REG_BUCK2_VOLT_IDLE = 0x11, + BD718XX_REG_1ST_NODVS_BUCK_VOLT = 0x14, + BD718XX_REG_2ND_NODVS_BUCK_VOLT = 0x15, + BD718XX_REG_3RD_NODVS_BUCK_VOLT = 0x16, + BD718XX_REG_4TH_NODVS_BUCK_VOLT = 0x17, + BD718XX_REG_LDO1_VOLT = 0x18, + BD718XX_REG_LDO2_VOLT = 0x19, + BD718XX_REG_LDO3_VOLT = 0x1A, + BD718XX_REG_LDO4_VOLT = 0x1B, + BD718XX_REG_LDO5_VOLT = 0x1C, + BD718XX_REG_LDO6_VOLT = 0x1D, + BD718XX_REG_TRANS_COND0 = 0x1F, + BD718XX_REG_TRANS_COND1 = 0x20, + BD718XX_REG_VRFAULTEN = 0x21, + BD718XX_REG_MVRFLTMASK0 = 0x22, + BD718XX_REG_MVRFLTMASK1 = 0x23, + BD718XX_REG_MVRFLTMASK2 = 0x24, + BD718XX_REG_RCVCFG = 0x25, + BD718XX_REG_RCVNUM = 0x26, + BD718XX_REG_PWRONCONFIG0 = 0x27, + BD718XX_REG_PWRONCONFIG1 = 0x28, + BD718XX_REG_RESETSRC = 0x29, + BD718XX_REG_MIRQ = 0x2A, + BD718XX_REG_IRQ = 0x2B, + BD718XX_REG_IN_MON = 0x2C, + BD718XX_REG_POW_STATE = 0x2D, + BD718XX_REG_OUT32K = 0x2E, + BD718XX_REG_REGLOCK = 0x2F, + BD718XX_REG_OTPVER = 0xFF, + BD718XX_MAX_REGISTER = 0x100, }; #define REGLOCK_PWRSEQ 0x1 #define REGLOCK_VREG 0x10 /* Generic BUCK control masks */ -#define BD71837_BUCK_SEL 0x02 -#define BD71837_BUCK_EN 0x01 -#define BD71837_BUCK_RUN_ON 0x04 +#define BD718XX_BUCK_SEL 0x02 +#define BD718XX_BUCK_EN 0x01 +#define BD718XX_BUCK_RUN_ON 0x04 /* Generic LDO masks */ -#define BD71837_LDO_SEL 0x80 -#define BD71837_LDO_EN 0x40 +#define BD718XX_LDO_SEL 0x80 +#define BD718XX_LDO_EN 0x40 /* BD71837 BUCK ramp rate CTRL reg bits */ #define BUCK_RAMPRATE_MASK 0xC0 @@ -115,49 +134,27 @@ enum { #define BUCK_RAMPRATE_2P50MV 0x2 #define BUCK_RAMPRATE_1P25MV 0x3 -/* BD71837_REG_BUCK1_VOLT_RUN bits */ -#define BUCK1_RUN_MASK 0x3F -#define BUCK1_RUN_DEFAULT 0x14 - -/* BD71837_REG_BUCK1_VOLT_SUSP bits */ -#define BUCK1_SUSP_MASK 0x3F -#define BUCK1_SUSP_DEFAULT 0x14 +#define DVS_BUCK_RUN_MASK 0x3F +#define DVS_BUCK_SUSP_MASK 0x3F +#define DVS_BUCK_IDLE_MASK 0x3F -/* BD71837_REG_BUCK1_VOLT_IDLE bits */ -#define BUCK1_IDLE_MASK 0x3F -#define BUCK1_IDLE_DEFAULT 0x14 +#define BD718XX_1ST_NODVS_BUCK_MASK 0x07 +#define BD71847_BUCK4_MASK 0x03 +#define BD71837_BUCK6_MASK 0x03 +#define BD718XX_3RD_NODVS_BUCK_MASK 0x07 +#define BD718XX_4TH_NODVS_BUCK_MASK 0x3F -/* BD71837_REG_BUCK2_VOLT_RUN bits */ -#define BUCK2_RUN_MASK 0x3F -#define BUCK2_RUN_DEFAULT 0x1E +#define BD718XX_LDO1_MASK 0x03 +#define BD718XX_LDO2_MASK 0x20 +#define BD718XX_LDO3_MASK 0x0F +#define BD718XX_LDO4_MASK 0x0F +#define BD718XX_LDO6_MASK 0x0F -/* BD71837_REG_BUCK2_VOLT_IDLE bits */ -#define BUCK2_IDLE_MASK 0x3F -#define BUCK2_IDLE_DEFAULT 0x14 +#define BD71837_LDO5_MASK 0x0F +#define BD71847_LDO5_MASK 0x0F -/* BD71837_REG_BUCK3_VOLT_RUN bits */ -#define BUCK3_RUN_MASK 0x3F -#define BUCK3_RUN_DEFAULT 0x1E +#define BD71837_LDO7_MASK 0x0F -/* BD71837_REG_BUCK4_VOLT_RUN bits */ -#define BUCK4_RUN_MASK 0x3F -#define BUCK4_RUN_DEFAULT 0x1E - -/* BD71837_REG_BUCK5_VOLT bits */ -#define BUCK5_MASK 0x07 -#define BUCK5_DEFAULT 0x02 - -/* BD71837_REG_BUCK6_VOLT bits */ -#define BUCK6_MASK 0x03 -#define BUCK6_DEFAULT 0x03 - -/* BD71837_REG_BUCK7_VOLT bits */ -#define BUCK7_MASK 0x07 -#define BUCK7_DEFAULT 0x03 - -/* BD71837_REG_BUCK8_VOLT bits */ -#define BUCK8_MASK 0x3F -#define BUCK8_DEFAULT 0x1E /* BD718XX Voltage monitoring masks */ #define BD718XX_BUCK1_VRMON80 0x1 @@ -221,27 +218,6 @@ enum { #define BD71837_INT_ON_REQ_MASK 0x2 #define BD71837_INT_STBY_REQ_MASK 0x1 -/* BD71837_REG_LDO1_VOLT bits */ -#define LDO1_MASK 0x03 - -/* BD71837_REG_LDO1_VOLT bits */ -#define LDO2_MASK 0x20 - -/* BD71837_REG_LDO3_VOLT bits */ -#define LDO3_MASK 0x0F - -/* BD71837_REG_LDO4_VOLT bits */ -#define LDO4_MASK 0x0F - -/* BD71837_REG_LDO5_VOLT bits */ -#define LDO5_MASK 0x0F - -/* BD71837_REG_LDO6_VOLT bits */ -#define LDO6_MASK 0x0F - -/* BD71837_REG_LDO7_VOLT bits */ -#define LDO7_MASK 0x0F - /* Register write induced reset settings */ /* @@ -341,10 +317,11 @@ enum { BD718XX_PWRBTN_LONG_PRESS_15S }; -struct bd71837_pmic; -struct bd71837_clk; +struct bd718xx_pmic; +struct bd718xx_clk; struct bd71837 { + unsigned int chip_type; struct device *dev; struct regmap *regmap; unsigned long int id; @@ -352,8 +329,8 @@ struct bd71837 { int chip_irq; struct regmap_irq_chip_data *irq_data; - struct bd71837_pmic *pmic; - struct bd71837_clk *clk; + struct bd718xx_pmic *pmic; + struct bd718xx_clk *clk; }; #endif /* __LINUX_MFD_BD71837_H__ */ -- 2.14.3
