Re: [PATCH v3 net-next 3/6] dt-bindings: net: Add lantiq,xrx200-net DT bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Sep 09, 2018 at 10:16:44PM +0200, Hauke Mehrtens wrote:
> This adds the binding for the PMAC core between the CPU and the GSWIP
> switch found on the xrx200 / VR9 Lantiq / Intel SoC.
> 
> Signed-off-by: Hauke Mehrtens <hauke@xxxxxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx
> ---
>  .../devicetree/bindings/net/lantiq,xrx200-net.txt   | 21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt
> 
> diff --git a/Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt
> new file mode 100644
> index 000000000000..8a2fe5200cdc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt
> @@ -0,0 +1,21 @@
> +Lantiq xRX200 GSWIP PMAC Ethernet driver
> +==================================
> +
> +Required properties:
> +
> +- compatible	: "lantiq,xrx200-net" for the PMAC of the embedded
> +		: GSWIP in the xXR200
> +- reg		: memory range of the PMAC core inside of the GSWIP core
> +- interrupts	: TX and RX DMA interrupts. Use interrupt-names "tx" for
> +		: the TX interrupt and "rx" for the RX interrupt.
> +
> +Example:
> +
> +eth0: eth@E10B308 {

ethernet@e10b308

> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	compatible = "lantiq,xrx200-net";
> +	reg = <0xE10B308 0x30>;

lowercase hex please.

> +	interrupts = <73>, <72>;
> +	interrupt-names = "tx", "rx";
> +};
> -- 
> 2.11.0
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux