Most of the clock related dt-binding header files are located in dt-bindings/clock folder. It would be good to keep all the similar header files at a single location. Signed-off-by: Tushar Behera <tushar.behera@xxxxxxxxxx> CC: Rob Landley <rob@xxxxxxxxxxx> CC: Andrew Victor <linux@xxxxxxxxxxxx> CC: Jean-Christophe Plagniol-Villard <plagnioj@xxxxxxxxxxxx> --- .../devicetree/bindings/clock/at91-clock.txt | 2 +- arch/arm/boot/dts/sama5d3.dtsi | 2 +- arch/arm/boot/dts/sama5d3_mci2.dtsi | 2 +- arch/arm/boot/dts/sama5d3_tcb1.dtsi | 2 +- arch/arm/boot/dts/sama5d3_uart.dtsi | 2 +- include/dt-bindings/{clk => clock}/at91.h | 0 6 files changed, 5 insertions(+), 5 deletions(-) rename include/dt-bindings/{clk => clock}/at91.h (100%) diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt index cd5e239..6794cdc 100644 --- a/Documentation/devicetree/bindings/clock/at91-clock.txt +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt @@ -62,7 +62,7 @@ Required properties for PMC node: - interrupt-controller : tell that the PMC is an interrupt controller. - #interrupt-cells : must be set to 1. The first cell encodes the interrupt id, and reflect the bit position in the PMC_ER/DR/SR registers. - You can use the dt macros defined in dt-bindings/clk/at91.h. + You can use the dt macros defined in dt-bindings/clock/at91.h. 0 (AT91_PMC_MOSCS) -> main oscillator ready 1 (AT91_PMC_LOCKA) -> PLL A ready 2 (AT91_PMC_LOCKB) -> PLL B ready diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 3d5faf8..8c977b5 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -13,7 +13,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/clk/at91.h> +#include <dt-bindings/clock/at91.h> / { model = "Atmel SAMA5D3 family SoC"; diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi index b029fe7..1b02208 100644 --- a/arch/arm/boot/dts/sama5d3_mci2.dtsi +++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi @@ -9,7 +9,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/clk/at91.h> +#include <dt-bindings/clock/at91.h> / { ahb { diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi index 382b044..0284845 100644 --- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi +++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi @@ -9,7 +9,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/clk/at91.h> +#include <dt-bindings/clock/at91.h> / { aliases { diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi index a9fa75e..7a8d4c6 100644 --- a/arch/arm/boot/dts/sama5d3_uart.dtsi +++ b/arch/arm/boot/dts/sama5d3_uart.dtsi @@ -9,7 +9,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/clk/at91.h> +#include <dt-bindings/clock/at91.h> / { aliases { diff --git a/include/dt-bindings/clk/at91.h b/include/dt-bindings/clock/at91.h similarity index 100% rename from include/dt-bindings/clk/at91.h rename to include/dt-bindings/clock/at91.h -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html