[PATCH v3 1/9] powerpc: build .dtb files in dts directory

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Align powerpc with other architectures which build the dtb files in the
same directory as the dts files. This is also in line with most other
build targets which are located in the same directory as the source.
This move will help enable the 'dtbs' target which builds all the dtbs
regardless of kernel config.

This transition could break some scripts if they expect dtb files in the
old location.

Cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
Cc: Paul Mackerras <paulus@xxxxxxxxx>
Cc: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
Cc: linuxppc-dev@xxxxxxxxxxxxxxxx
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
v3:
 - Remove duplicate mpc5200 dtbs from image-y targets. The dtb target already
   comes from the cuImage.<platform> target.

 arch/powerpc/Makefile          |  2 +-
 arch/powerpc/boot/Makefile     | 55 ++++++++++++++++------------------
 arch/powerpc/boot/dts/Makefile |  1 +
 3 files changed, 28 insertions(+), 30 deletions(-)
 create mode 100644 arch/powerpc/boot/dts/Makefile

diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 11a1acba164a..53ea887eb34e 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -294,7 +294,7 @@ bootwrapper_install:
 	$(Q)$(MAKE) $(build)=$(boot) $(patsubst %,$(boot)/%,$@)

 %.dtb: scripts
-	$(Q)$(MAKE) $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
+	$(Q)$(MAKE) $(build)=$(boot)/dts $(patsubst %,$(boot)/dts/%,$@)

 # Used to create 'merged defconfigs'
 # To use it $(call) it with the first argument as the base defconfig
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 0fb96c26136f..bca5c23767df 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -304,9 +304,9 @@ image-$(CONFIG_PPC_ADDER875)		+= cuImage.adder875-uboot \
 					   dtbImage.adder875-redboot

 # Board ports in arch/powerpc/platform/52xx/Kconfig
-image-$(CONFIG_PPC_LITE5200)		+= cuImage.lite5200 lite5200.dtb
-image-$(CONFIG_PPC_LITE5200)		+= cuImage.lite5200b lite5200b.dtb
-image-$(CONFIG_PPC_MEDIA5200)		+= cuImage.media5200 media5200.dtb
+image-$(CONFIG_PPC_LITE5200)		+= cuImage.lite5200
+image-$(CONFIG_PPC_LITE5200)		+= cuImage.lite5200b
+image-$(CONFIG_PPC_MEDIA5200)		+= cuImage.media5200

 # Board ports in arch/powerpc/platform/82xx/Kconfig
 image-$(CONFIG_MPC8272_ADS)		+= cuImage.mpc8272ads
@@ -381,11 +381,11 @@ $(addprefix $(obj)/, $(sort $(filter zImage.%, $(image-y)))): vmlinux $(wrapperb
 	$(call if_changed,wrap,$(subst $(obj)/zImage.,,$@))

 # dtbImage% - a dtbImage is a zImage with an embedded device tree blob
-$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/%.dtb FORCE
-	$(call if_changed,wrap,$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
+$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE
+	$(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)

-$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/%.dtb FORCE
-	$(call if_changed,wrap,$*,,$(obj)/$*.dtb)
+$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE
+	$(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb)

 # This cannot be in the root of $(src) as the zImage rule always adds a $(obj)
 # prefix
@@ -395,36 +395,33 @@ $(obj)/vmlinux.strip: vmlinux
 $(obj)/uImage: vmlinux $(wrapperbits) FORCE
 	$(call if_changed,wrap,uboot)

-$(obj)/uImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
-	$(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
+$(obj)/uImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+	$(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)

-$(obj)/uImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
-	$(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb)
+$(obj)/uImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+	$(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb)

-$(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
-	$(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
+$(obj)/cuImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+	$(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)

-$(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
-	$(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb)
+$(obj)/cuImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+	$(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb)

-$(obj)/simpleImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
-	$(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
+$(obj)/simpleImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+	$(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)

-$(obj)/simpleImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
-	$(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb)
+$(obj)/simpleImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+	$(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb)

-$(obj)/treeImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
-	$(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
+$(obj)/treeImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+	$(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz)

-$(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE
-	$(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb)
+$(obj)/treeImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE
+	$(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb)

-# Rule to build device tree blobs
-$(obj)/%.dtb: $(src)/dts/%.dts FORCE
-	$(call if_changed_dep,dtc)
-
-$(obj)/%.dtb: $(src)/dts/fsl/%.dts FORCE
-	$(call if_changed_dep,dtc)
+# Needed for the above targets to work with dts/fsl/ files
+$(obj)/dts/%.dtb: $(obj)/dts/fsl/%.dtb
+	@cp $< $@

 # If there isn't a platform selected then just strip the vmlinux.
 ifeq (,$(image-y))
diff --git a/arch/powerpc/boot/dts/Makefile b/arch/powerpc/boot/dts/Makefile
new file mode 100644
index 000000000000..f66554cd5c45
--- /dev/null
+++ b/arch/powerpc/boot/dts/Makefile
@@ -0,0 +1 @@
+# SPDX-License-Identifier: GPL-2.0
--
2.17.1



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux