Document RZ/G2M (R8A774A1) SoC bindings.
The RZ/G2M SoC is similar to R-Car M3-W (R8A7796).
Signed-off-by: Biju Das <biju.das@xxxxxxxxxxxxxx>
Reviewed-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/media/rcar_vin.txt | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt
index 2f42005..8c81689 100644
--- a/Documentation/devicetree/bindings/media/rcar_vin.txt
+++ b/Documentation/devicetree/bindings/media/rcar_vin.txt
@@ -12,6 +12,7 @@ on Gen3 platforms to a CSI-2 receiver.
- compatible: Must be one or more of the following
- "renesas,vin-r8a7743" for the R8A7743 device
- "renesas,vin-r8a7745" for the R8A7745 device
+ - "renesas,vin-r8a774a1" for the R8A774A1 device
- "renesas,vin-r8a7778" for the R8A7778 device
- "renesas,vin-r8a7779" for the R8A7779 device
- "renesas,vin-r8a7790" for the R8A7790 device
@@ -58,9 +59,9 @@ The per-board settings Gen2 platforms:
- data-enable-active: polarity of CLKENB signal, see [1] for
description. Default is active high.
-The per-board settings Gen3 platforms:
+The per-board settings Gen3 and RZ/G2 platforms:
-Gen3 platforms can support both a single connected parallel input source
+Gen3 and RZ/G2 platforms can support both a single connected parallel input source
from external SoC pins (port@0) and/or multiple parallel input sources
from local SoC CSI-2 receivers (port@1) depending on SoC.
--
2.7.4
