From: Chris Paterson <chris.paterson2@xxxxxxxxxxx>
Add the device nodes for both RZ/G2M CAN channels.
Signed-off-by: Chris Paterson <chris.paterson2@xxxxxxxxxxx>
Reviewed-by: Biju Das <biju.das@xxxxxxxxxxxxxx>
---
v1->v2:
* replaced "renesas,rzg-gen2-can" with "renesas,rcar-gen3-can" as per
Geert's comment.
This patch applies on top of renesas-devel-20180906-v4.19-rc2.
arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index 046fc93..867e875 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -874,6 +874,30 @@
status = "disabled";
};
+ can0: can@e6c30000 {
+ compatible = "renesas,can-r8a774a1",
+ "renesas,rcar-gen3-can";
+ reg = <0 0xe6c30000 0 0x1000>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 916>, <&can_clk>;
+ clock-names = "clkp1", "can_clk";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 916>;
+ status = "disabled";
+ };
+
+ can1: can@e6c38000 {
+ compatible = "renesas,can-r8a774a1",
+ "renesas,rcar-gen3-can";
+ reg = <0 0xe6c38000 0 0x1000>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 915>, <&can_clk>;
+ clock-names = "clkp1", "can_clk";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 915>;
+ status = "disabled";
+ };
+
pwm0: pwm@e6e30000 {
compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
reg = <0 0xe6e30000 0 0x8>;
--
2.7.4
