This patch adds a device tree for the ConnectCore 6UL SBC Pro board, based on
the ConnectCore 6UL SOM.
Changes since v2 [2]:
* Removed redundant clocks from pwm nodes
* Use real iomux pad values
* Spelling change in regulator-usb-otg1 node name
Changes since v1 [1]:
* Removed unused pinctrl nodes
* Replace undocumented vendor BSP node by using GPIO hogs
* Formatting changes:
* Change node names to use dashes instead of underscores
[1] https://lore.kernel.org/lkml/1534936719-13770-2-git-send-email-alex.gonzalez@xxxxxxxx/
[2] https://lore.kernel.org/lkml/1536074909-8654-1-git-send-email-alex.gonzalez@xxxxxxxx/
Alex Gonzalez (1):
ARM: dts: imx6ul: Add DTS for ConnectCore 6UL SBC Pro
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 390 ++++++++++++++++++++++++++++
2 files changed, 391 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
