Re: [PATCH v6 1/2] dt-bindings: leds: Add bindings for lm3697 driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi!

> >> index 000000000000..3256dec21075
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/leds/leds-lm3697.txt
> >> @@ -0,0 +1,86 @@
> >> +* Texas Instruments - LM3697 Highly Efficient White LED Driver
> >> +
> >> +The LM3697 11-bit LED driver provides high-
> >> +performance backlight dimming for 1, 2, or 3 series
> >> +LED strings while delivering up to 90% efficiency.
> > 
> > Hmm. We already have second set of bindings for 3697:
> > 
> > ./devicetree/bindings/mfd/ti-lmu.txt
> > 
> > (Sorry for not noticing that earlier). Advantage is that those have
> > had discussion with device tree people and have acks:
> > 
> > What to do there?
> 
> UGH!  IMO this should have not been accepted without the support code.
> I think this MFD driver is complete over kill to try to commonize features
> into a MFD device.  The LM3631 and LM3632 seem to be the only true MFD devices
> here since they provide regulator support.

They are not yet in mainline; but they have Rob's acknowledges.

...but I see there are improvements possible.

> The LM3697 fault monitoring is only for test purposes according to the data
> sheet.  Not sure the customer can trust this or they should be warned at boot
> that the Fault monitoring is for test purposes only.

Ok, but that's topic for the driver, not for binding, right?

> And I think Jacek pointed out that the bindings references in this bindings
> don't even exist.
> 
> I am thinking we need to deprecate this MFD driver and consolidate these drivers
> in the LED directory as we indicated before.  I did not find any ti-lmu support
> code.
> 
> ti-lmu common core code and then the LED children appending the feature differentiation.

> Need some maintainer weigh in here.

Hehe. I'm maintnainer. Fun.

Is there something obviously wrong with
287cce719d85311f61d1b6b7f7b0d93f7907cd46 +
d774c7e447ac911e73a1b3c775e6d89f0422218c ?

If not, as it already had discussion/Acks so I'd prefer that one. We
may move it to LEDs directory if neccessary, or something like that...

Best regards,

								Pavel

> > commit 287cce719d85311f61d1b6b7f7b0d93f7907cd46
> > Author: Milo Kim <milo.kim@xxxxxx>
> > Date:   Tue Feb 28 15:45:14 2017 +0900
> > 
> >     dt-bindings: mfd: Add TI LMU device binding information
> > 
> >     This patch describes overall binding for TI LMU MFD devices.
> > 
> >     Signed-off-by: Milo Kim <milo.kim@xxxxxx>
> >         Acked-by: Rob Herring <robh+dt@xxxxxxxxxx>
> > 	    Acked-by: Tony Lindgren <tony@xxxxxxxxxxx>
> > 	        Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
> > 		
> > 
> > commit d774c7e447ac911e73a1b3c775e6d89f0422218c
> > Author: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
> > Date:   Mon Aug 27 09:15:08 2018 -0700
> > 
> >     dt-bindings: mfd: ti-lmu: update for backlight
> >     
> >     Update binding to integrate the backlight feature directly into
> >     the main node, as suggested by Rob Herring.
> >     
> >     Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
> > 
> > diff --git a/Documentation/devicetree/bindings/mfd/ti-lmu.txt b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
> > index c885cf8..b3433e9 100644
> > --- a/Documentation/devicetree/bindings/mfd/ti-lmu.txt
> > +++ b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
> > @@ -28,10 +28,9 @@ Required properties:
> >  
> >  Optional property:
> >    - enable-gpios: A GPIO specifier for hardware enable pin.
> > -
> > -Required node:
> > -  - backlight: All LMU devices have backlight child nodes.
> > -               For the properties, please refer to [1].
> > +  - pwm-names: Should be either "lmu-backlight" or unset
> > +  - pwm: This should be a PWM specifier following ../pwm/pwm.txt and must
> > +         only be specified, if the backlight should be used in PWM mode.
> >  
> >  Optional nodes:
> >    - fault-monitor: Hardware fault monitoring driver for LM3633 and LM3697.
> > @@ -42,8 +41,31 @@ Optional nodes:
> >    - leds: LED properties for LM3633. Please refer to [2].
> >    - regulators: Regulator properties for LM3631 and LM3632.
> >                  Please refer to [3].
> > +  - bank0, bank1, bank2: This contains the backlight configuration
> > +                         for each backlight control bank.
> > +
> > +Required properties in the bank subnodes:
> > +  - label: A string describing the backlight. Should contain "keyboard"
> > +           for a keyboard backlight and "lcd" for LCD panel backlights.
> > +  - ti,led-sources: A list of channels, that should be driven. Each channel
> > +                    should only be driven by one bank.
> > +
> > +Optional properties in the bank subnodes:
> > +  - default-brightness-level: Backlight initial brightness value.
> > +                              Type is <u32>. It is set as soon as backlight
> > +			      device is created.
> > +			      0 ~ 2047 = LM3631, LM3632, LM3633, LM3695 and
> > +					 LM3697
> > +			      0 ~ 255  = LM3532
> > +  - ti,ramp-up-ms, ti,ramp-down-ms: Light dimming effect properties.
> > +				    Type is <u32>. Unit is millisecond.
> > +					0 ~ 65 ms    = LM3532
> > +					0 ~ 4000 ms  = LM3631
> > +					0 ~ 16000 ms = LM3633 and LM3697
> > +  - pwm-period: PWM period. Only valid in PWM brightness mode.
> > +                Type is <u32>. If this property is missing, then control
> > +		mode is set to I2C by default.
> >  
> > -[1] ../leds/backlight/ti-lmu-backlight.txt
> >  [2] ../leds/leds-lm3633.txt
> >  [3] ../regulator/lm363x-regulator.txt
> >  
> > @@ -53,14 +75,11 @@ lm3532@38 {
> >  
> >  	enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
> >  
> > -	backlight {
> > -		compatible = "ti,lm3532-backlight";
> > -
> > -		lcd {
> > -			led-sources = <0 1 2>;
> > -			ramp-up-msec = <30>;
> > -			ramp-down-msec = <0>;
> > -		};
> > +	bank0 {
> > +		label = "lcd";
> > +		led-sources = <0 1 2>;
> > +		ramp-up-msec = <30>;
> > +		ramp-down-msec = <0>;
> >  	};
> >  };
> >  
> > @@ -105,13 +124,10 @@ lm3631@29 {
> >  		};
> >  	};
> >  
> > -	backlight {
> > -		compatible = "ti,lm3631-backlight";
> > -
> > -		lcd_bl {
> > -			led-sources = <0 1>;
> > -			ramp-up-msec = <300>;
> > -		};
> > +	bank0 {
> > +		label = "lcd_bl";
> > +		led-sources = <0 1>;
> > +		ramp-up-msec = <300>;
> >  	};
> >  };
> >  
> > @@ -147,16 +163,13 @@ lm3632@11 {
> >  		};
> >  	};
> >  
> > -	backlight {
> > -		compatible = "ti,lm3632-backlight";
> > -
> > -		pwms = <&pwm0 0 10000 0>; /* pwm number, period, polarity */
> > -		pwm-names = "lmu-backlight";
> > +	pwms = <&pwm0 0 10000 0>; /* pwm number, period, polarity */
> > +	pwm-names = "lmu-backlight";
> >  
> > -		lcd {
> > -			led-sources = <0 1>;
> > -			pwm-period = <10000>;
> > -		};
> > +	bank0 {
> > +		label = "lcd";
> > +		led-sources = <0 1>;
> > +		pwm-period = <10000>;
> >  	};
> >  };
> >  
> > @@ -166,22 +179,18 @@ lm3633@36 {
> >  
> >  	enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
> >  
> > -	backlight {
> > -		compatible = "ti,lm3633-backlight";
> > -
> > -		main {
> > -			label = "main_lcd";
> > -			led-sources = <1 2>;
> > -			ramp-up-msec = <500>;
> > -			ramp-down-msec = <500>;
> > -		};
> > +	bank0 {
> > +		label = "main_lcd";
> > +		led-sources = <1 2>;
> > +		ramp-up-msec = <500>;
> > +		ramp-down-msec = <500>;
> > +	};
> >  
> > -		front {
> > -			label = "front_lcd";
> > -			led-sources = <0>;
> > -			ramp-up-msec = <1000>;
> > -			ramp-down-msec = <0>;
> > -		};
> > +	bank1 {
> > +		label = "front_lcd";
> > +		led-sources = <0>;
> > +		ramp-up-msec = <1000>;
> > +		ramp-down-msec = <0>;
> >  	};
> >  
> >  	leds {
> > @@ -211,13 +220,9 @@ lm3695@63 {
> >  
> >  	enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
> >  
> > -	backlight {
> > -		compatible = "ti,lm3695-backlight";
> > -
> > -		lcd {
> > -			label = "bl";
> > -			led-sources = <0 1>;
> > -		};
> > +	bank0 {
> > +		label = "lcd_bl";
> > +		led-sources = <0 1>;
> >  	};
> >  };
> >  
> > @@ -227,14 +232,10 @@ lm3697@36 {
> >  
> >  	enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
> >  
> > -	backlight {
> > -		compatible = "ti,lm3697-backlight";
> > -
> > -		lcd {
> > -			led-sources = <0 1 2>;
> > -			ramp-up-msec = <200>;
> > -			ramp-down-msec = <200>;
> > -		};
> > +	bank0 {
> > +		led-sources = <0 1 2>;
> > +		ramp-up-msec = <200>;
> > +		ramp-down-msec = <200>;
> >  	};
> >  
> >  	fault-monitor {
> > 
> 
> 

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux