The Cadence Sierra PHY supports a number of different protocols. This series adds a driver with support for USB3 and PCIe modes. Only one clock frequency is currently supported, so the value of clock provided in device tree is ignored. Changes from v1: * Each group of lanes is now treated as a subnode, and a generic PHY device is created for each group. * General cleanup based on comments * A reset is now required for each subnode. The complete PHY block is taken out of reset at initial probe, and remains out of reset. * Added a binding to allow for hardware configuration of PHY registers Alan Douglas (2): dt-bindings: phy: Document cadence Sierra PHY bindings phy: cadence: Add driver for Sierra PHY .../devicetree/bindings/phy/cdns-sierra-phy.txt | 65 ++++ drivers/phy/Kconfig | 1 + drivers/phy/Makefile | 1 + drivers/phy/cadence/Kconfig | 9 + drivers/phy/cadence/Makefile | 2 + drivers/phy/cadence/cdns-sierra.c | 385 +++++++++++++++++++++ 6 files changed, 463 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/cdns-sierra-phy.txt create mode 100644 drivers/phy/cadence/Kconfig create mode 100644 drivers/phy/cadence/Makefile create mode 100644 drivers/phy/cadence/cdns-sierra.c -- 1.9.0
