On 03/05/2014 06:25 AM, Ulf Hansson wrote:
On 4 March 2014 20:27, Georgi Djakov <gdjakov@xxxxxxxxxx> wrote:
[..]
+Required properties:
+- compatible: Should contain "qcom,sdhci-msm-v4".
+- reg: Base address and length of the register set listed in reg-names.
+- reg-names: Should contain the following:
+ "hc_mem" - Host controller register map
+ "core_mem" - SD Core register map
+- interrupts: Should contain an interrupt-specifiers for the interrupts listed in interrupt-names.
+- interrupt-names: Should contain the following:
+ "hc_irq" - Host controller interrupt
+ "pwr_irq" - PMIC interrupt
+- vdd-supply: Phandle to the regulator for the vdd (core voltage) supply.
+- vdd-io-supply: Phandle to the regulator for the vdd-io (i/o voltage) supply.
The common naming of the above regulators are "vmmc" and "vqmmc". Is
there any specific reason to why you can't use these names?
Hi Ulf,
They are named this way on the schematics, i will change them to the
common names. Thanks!
BR,
Georgi
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
