By experiment, the A64 HDMi PHY doesn't support the PLL-VIDEO mux
introduced in R40, although it has two PLL-VIDEOs.
Change the A64 HDMI PHY binding to R40 one.
This binding is introduced in v4.19, which is still in RC stage, so we
have change to fix it.
Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
---
.../devicetree/bindings/display/sunxi/sun4i-drm.txt | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
index f8773ecb7525..de6814a5aba3 100644
--- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
@@ -103,7 +103,7 @@ Required properties:
- compatible: value must be one of:
* allwinner,sun8i-a83t-hdmi-phy
* allwinner,sun8i-h3-hdmi-phy
- * allwinner,sun50i-a64-hdmi-phy
+ * allwinner,sun8i-r40-hdmi-phy
- reg: base address and size of memory-mapped region
- clocks: phandles to the clocks feeding the HDMI PHY
* bus: the HDMI PHY interface clock
@@ -112,9 +112,9 @@ Required properties:
- resets: phandle to the reset controller driving the PHY
- reset-names: must be "phy"
-H3 and A64 HDMI PHY require additional clocks:
+H3 and R40 HDMI PHY require additional clocks:
- pll-0: parent of phy clock
- - pll-1: second possible phy clock parent (A64 only)
+ - pll-1: second possible phy clock parent (R40 only)
TV Encoder
----------
--
2.18.0
