Re: [PATCH] arm64: allwinner: h6: Add OrangePi One Plus initial support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jul 31, 2018 at 9:42 PM Chen-Yu Tsai <wens@xxxxxxxx> wrote:
>
> On Tue, Jul 31, 2018 at 9:41 PM, Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> wrote:
> > On Mon, Jul 30, 2018 at 2:47 PM, Chen-Yu Tsai <wens@xxxxxxxx> wrote:
> >> On Mon, Jul 30, 2018 at 5:00 PM, Maxime Ripard
> >> <maxime.ripard@xxxxxxxxxxx> wrote:
> >>> Hi,
> >>>
> >>> On Sat, Jul 28, 2018 at 11:56:15PM +0530, Jagan Teki wrote:
> >>>> OrangePi One Plus is Allwinner H6 based open-source SBC,
> >>>> which support:
> >>>> - Allwinner H6 Quad-core 64-bit ARM Cortex-A53
> >>>> - GPU Mali-T720
> >>>> - 1GB LPDDR3 RAM
> >>>> - AXP805 PMIC
> >>>> - 1Gbps GMAC via RTL8211
> >>>> - USB 2.0 Host, OTG
> >>>> - HDMI port
> >>>> - 5V/2A DC power supply
> >>>>
> >>>> Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
> >>>> ---
> >>>>  arch/arm64/boot/dts/allwinner/Makefile        |   1 +
> >>>>  .../allwinner/sun50i-h6-orangepi-one-plus.dts | 150 ++++++++++++++++++
> >>>>  2 files changed, 151 insertions(+)
> >>>>  create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
> >>>>
> >>>> diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
> >>>> index 9ffa7a038791..c38f326e7fec 100644
> >>>> --- a/arch/arm64/boot/dts/allwinner/Makefile
> >>>> +++ b/arch/arm64/boot/dts/allwinner/Makefile
> >>>> @@ -15,4 +15,5 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
> >>>>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
> >>>>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
> >>>>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
> >>>> +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
> >>>>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
> >>>> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
> >>>> new file mode 100644
> >>>> index 000000000000..0612c19cd994
> >>>> --- /dev/null
> >>>> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts
> >>>> @@ -0,0 +1,150 @@
> >>>> +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> >>>> +/*
> >>>> + * Copyright (C) 2018 Amarula Solutions
> >>>> + * Author: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
> >>>> + */
> >>>> +
> >>>> +/dts-v1/;
> >>>> +
> >>>> +#include "sun50i-h6.dtsi"
> >>>> +
> >>>> +#include <dt-bindings/gpio/gpio.h>
> >>>> +
> >>>> +/ {
> >>>> +     model = "OrangePi One Plus";
> >>>> +     compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
> >>>> +
> >>>> +     aliases {
> >>>> +             serial0 = &uart0;
> >>>> +     };
> >>>> +
> >>>> +     chosen {
> >>>> +             stdout-path = "serial0:115200n8";
> >>>> +     };
> >>>> +};
> >>>> +
> >>>> +&mmc0 {
> >>>> +     pinctrl-names = "default";
> >>>> +     pinctrl-0 = <&mmc0_pins>;
> >>>> +     vmmc-supply = <&reg_cldo1>;
> >>>> +     cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
> >>>> +     bus-width = <4>;
> >>>> +     status = "okay";
> >>>> +};
> >>>> +
> >>>> +&r_i2c {
> >>>> +     status = "okay";
> >>>> +
> >>>> +     axp805: pmic@36 {
> >>>> +             compatible = "x-powers,axp805", "x-powers,axp806";
> >>>> +             reg = <0x36>;
> >>>> +             interrupt-parent = <&r_intc>;
> >>>> +             interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> >>>> +             interrupt-controller;
> >>>> +             #interrupt-cells = <1>;
> >>>> +             x-powers,self-working-mode;
> >>>> +
> >>>> +             regulators {
> >>>> +                     reg_aldo1: aldo1 {
> >>>> +                             regulator-always-on;
> >>>> +                             regulator-min-microvolt = <3300000>;
> >>>> +                             regulator-max-microvolt = <3300000>;
> >>>> +                             regulator-name = "vcc-pl";
> >>>> +                     };
> >>>> +
> >>>> +                     reg_aldo2: aldo2 {
> >>>> +                             regulator-min-microvolt = <3300000>;
> >>>> +                             regulator-max-microvolt = <3300000>;
> >>>> +                             regulator-name = "vcc-ac200";
> >>>> +                     };
> >>>> +
> >>>> +                     reg_aldo3: aldo3 {
> >>>> +                             regulator-always-on;
> >>>> +                             regulator-min-microvolt = <3300000>;
> >>>> +                             regulator-max-microvolt = <3300000>;
> >>>> +                             regulator-name = "vcc25-dram";
> >>>> +                     };
> >>>> +
> >>>> +                     reg_bldo1: bldo1 {
> >>>> +                             regulator-always-on;
> >>>> +                             regulator-min-microvolt = <1800000>;
> >>>> +                             regulator-max-microvolt = <1800000>;
> >>>> +                             regulator-name = "vcc-bias-pll";
> >>>> +                     };
> >>>> +
> >>>> +                     reg_bldo2: bldo2 {
> >>>> +                             regulator-always-on;
> >>>> +                             regulator-min-microvolt = <1800000>;
> >>>> +                             regulator-max-microvolt = <1800000>;
> >>>> +                             regulator-name = "vcc-efuse-pcie-hdmi-io";
> >>>> +                     };
> >>>> +
> >>>> +                     reg_bldo3: bldo3 {
> >>>> +                             regulator-always-on;
> >>>> +                             regulator-min-microvolt = <1800000>;
> >>>> +                             regulator-max-microvolt = <1800000>;
> >>>> +                             regulator-name = "vcc-dcxoio";
> >>>> +                     };
> >>>> +
> >>>> +                     bldo4 {
> >>>> +                             /* unused */
> >>>> +                     };
> >>>> +
> >>>> +                     reg_cldo1: cldo1 {
> >>>> +                             regulator-always-on;
> >>>> +                             regulator-min-microvolt = <3300000>;
> >>>> +                             regulator-max-microvolt = <3300000>;
> >>>> +                             regulator-name = "vcc-3v3";
> >>>> +                     };
> >>>> +
> >>>> +                     reg_cldo2: cldo2 {
> >>>> +                             regulator-min-microvolt = <3300000>;
> >>>> +                             regulator-max-microvolt = <3300000>;
> >>>> +                             regulator-name = "vcc-wifi-1";
> >>>> +                     };
> >>>> +
> >>>> +                     reg_cldo3: cldo3 {
> >>>> +                             regulator-min-microvolt = <3300000>;
> >>>> +                             regulator-max-microvolt = <3300000>;
> >>>> +                             regulator-name = "vcc-wifi-2";
> >>>> +                     };
> >>>> +
> >>>> +                     reg_dcdca: dcdca {
> >>>> +                             regulator-always-on;
> >>>> +                             regulator-min-microvolt = <810000>;
> >>>> +                             regulator-max-microvolt = <1080000>;
> >>>> +                             regulator-name = "vdd-cpu";
> >>>> +                     };
> >>>> +
> >>>> +                     reg_dcdcc: dcdcc {
> >>>> +                             regulator-min-microvolt = <810000>;
> >>>> +                             regulator-max-microvolt = <1080000>;
> >>>> +                             regulator-name = "vdd-gpu";
> >>>> +                     };
> >>>> +
> >>>> +                     reg_dcdcd: dcdcd {
> >>>> +                             regulator-always-on;
> >>>> +                             regulator-min-microvolt = <960000>;
> >>>> +                             regulator-max-microvolt = <960000>;
> >>>> +                             regulator-name = "vdd-sys";
> >>>> +                     };
> >>>> +
> >>>> +                     reg_dcdce: dcdce {
> >>>> +                             regulator-always-on;
> >>>> +                             regulator-min-microvolt = <1200000>;
> >>>> +                             regulator-max-microvolt = <1200000>;
> >>>> +                             regulator-name = "vcc-dram";
> >>>> +                     };
> >>>> +
> >>>> +                     sw {
> >>>> +                             /* unused */
> >>>> +                     };
> >>>
> >>> Can't we have a DTSI for this PMIC too?
> >>
> >> Back when we started adding the regulators, Mark wasn't too happy with
> >> all the placeholders we put in the dtsi. I think we got away with it
> >> because we had other things in there as well. That's not true for this
> >> particular PMIC.
> >
> > So we need separate dtsi for this PMIC as well?
>
> I don't think we do. We don't gain much.

Merged with Maxime's ack, and the subject prefix fixed.
Also squashed in the Ethernet patch for this board.

ChenYu



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux