From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
Explicitly add pinmux' for all T20 SoC ball groups now:
- Colibri Address/Data Bus (GMI) further pins used as GPIOs
- Colibri BL_ON
- Colibri EXT_IO*
- Colibri L_BIAS, LCD_M1 is muxed with LCD_DE today's display need DE,
disable LCD_M1
- more Colibri LCD pins (L_* resp. LDD<*>)
- Colibri LCD (Optional 24 BPP Support)
- Colibri MMCCD
- uart_a_dsr and uart_a_dcd as GPIOs
- Colibri USB_CDET
- I2C3 (Optional)
- JTAG_RTCK
- LAN_RESET, LAN_EXT_WAKEUP and LAN_PME (All On-module)
- more NAND pins
- RESET_OUT
- THERMD_ALERT# (On-module), unlatched I2C address pin of LM95245
temperature sensor therefore requires disabling for now
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
---
Changes in v2:
- Replace underscores in node names with dashes.
arch/arm/boot/dts/tegra20-colibri-iris.dts | 40 +++++++++
arch/arm/boot/dts/tegra20-colibri.dtsi | 134 +++++++++++++++++++++++++----
2 files changed, 159 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-colibri-iris.dts b/arch/arm/boot/dts/tegra20-colibri-iris.dts
index e026478b58d0..28386b89d910 100644
--- a/arch/arm/boot/dts/tegra20-colibri-iris.dts
+++ b/arch/arm/boot/dts/tegra20-colibri-iris.dts
@@ -29,6 +29,10 @@
pinmux@70000014 {
state_default: pinmux {
+ bl-on {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
ddc {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
@@ -37,10 +41,38 @@
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
+ i2c {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ lcd {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ lm1 {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
mmc {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
+ mmccd {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ pwm-a-b {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ pwm-c-d {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ ssp {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
uart-a {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
@@ -48,6 +80,14 @@
uart-b {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
+
+ uart-c {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ usbh-pen {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
};
};
diff --git a/arch/arm/boot/dts/tegra20-colibri.dtsi b/arch/arm/boot/dts/tegra20-colibri.dtsi
index dfe237cea14b..aa2ca3dad32c 100644
--- a/arch/arm/boot/dts/tegra20-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra20-colibri.dtsi
@@ -75,20 +75,36 @@
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- /* Colibri Address/Data Bus (GMI) */
- gpio-gmi {
- nvidia,pins = "ata", "atc", "atd", "ate",
- "dap1", "dap2", "dap4", "gpu", "irrx",
- "irtx", "spia", "spib", "spic";
+ /*
+ * Colibri Address/Data Bus (GMI)
+ * Note: spid and spie optionally used for SPI1
+ */
+ gmi {
+ nvidia,pins = "atc", "atd", "ate", "dap1",
+ "dap2", "dap4", "gmd", "gpu",
+ "irrx", "irtx", "spia", "spib",
+ "spic", "spid", "spie", "uca",
+ "ucb";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+ /* Further pins may be used as GPIOs */
+ gmi-gpio1 {
+ nvidia,pins = "lpw0", "lsc1", "lsck", "lsda";
+ nvidia,function = "hdmi";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+ gmi-gpio2 {
+ nvidia,pins = "lcsn", "ldc", "lm0", "lsdi";
+ nvidia,function = "rsvd4";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
/* Colibri BL_ON */
bl-on {
nvidia,pins = "dta";
- nvidia,function = "vi";
+ nvidia,function = "rsvd1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
@@ -113,8 +129,8 @@
* Note: dtf optionally used for I2C3
*/
ext-io {
- nvidia,pins = "dtf";
- nvidia,function = "i2c3";
+ nvidia,pins = "dtf", "spdi";
+ nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
@@ -151,15 +167,31 @@
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
+ /*
+ * Colibri L_BIAS, LCD_M1 is muxed with LCD_DE
+ * today's display need DE, disable LCD_M1
+ */
+ lm1 {
+ nvidia,pins = "lm1";
+ nvidia,function = "rsvd3";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
/* Colibri LCD (L_* resp. LDD<*>) */
lcd {
nvidia,pins = "ld0", "ld1", "ld2", "ld3",
"ld4", "ld5", "ld6", "ld7",
"ld8", "ld9", "ld10", "ld11",
"ld12", "ld13", "ld14", "ld15",
- "ld16", "ld17", "lhs", "lpw0",
- "lpw2", "lsc0", "lsc1", "lsck",
- "lsda", "lspi", "lvs";
+ "ld16", "ld17", "lhs", "lsc0",
+ "lspi", "lvs";
+ nvidia,function = "displaya";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+ /* Colibri LCD (Optional 24 BPP Support) */
+ lcd-24 {
+ nvidia,pins = "ldi", "lhp0", "lhp1", "lhp2",
+ "lpp", "lvp1";
nvidia,function = "displaya";
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
@@ -172,6 +204,14 @@
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
+ /* Colibri MMCCD */
+ mmccd {
+ nvidia,pins = "gmb";
+ nvidia,function = "gmi_int";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
/* Colibri MMC (Optional 8-bit) */
mmc-8bit {
nvidia,pins = "gme";
@@ -220,6 +260,16 @@
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
+ uart-a-dsr {
+ nvidia,pins = "lpw1";
+ nvidia,function = "rsvd3";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+ uart-a-dcd {
+ nvidia,pins = "lpw2";
+ nvidia,function = "hdmi";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
/* Colibri UART-B */
uart-b {
@@ -237,12 +287,20 @@
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
+ /* Colibri USB_CDET */
+ usb-cdet {
+ nvidia,pins = "spdo";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
/* Colibri USBH_OC */
usbh-oc {
nvidia,pins = "spih";
nvidia,function = "spi2_alt";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
/* Colibri USBH_PEN */
@@ -250,7 +308,7 @@
nvidia,pins = "spig";
nvidia,function = "spi2_alt";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
/* Colibri VGA not supported */
@@ -261,6 +319,33 @@
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
+ /* I2C3 (Optional) */
+ i2c3 {
+ nvidia,pins = "dtf";
+ nvidia,function = "i2c3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* JTAG_RTCK */
+ jtag-rtck {
+ nvidia,pins = "gpu7";
+ nvidia,function = "rtck";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /*
+ * LAN_RESET, LAN_EXT_WAKEUP and LAN_PME
+ * (All On-module)
+ */
+ gpio-gpv {
+ nvidia,pins = "gpv";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
/*
* LAN_V_BUS, VDD_FAULT, BATT_FAULT, WM9712 PENDOWN
* (All On-module); Colibri CAN_INT
@@ -274,7 +359,7 @@
/* NAND (On-module) */
nand {
- nvidia,pins = "kbca", "kbcc", "kbcd",
+ nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
"kbce", "kbcf";
nvidia,function = "nand";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -297,6 +382,14 @@
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
+ /* RESET_OUT */
+ reset-out {
+ nvidia,pins = "ata";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
/*
* SPI1 (Optional)
* Note: spid and spie used for Colibri Address/Data
@@ -308,6 +401,17 @@
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
+
+ /*
+ * THERMD_ALERT# (On-module), unlatched I2C address pin
+ * of LM95245 temperature sensor therefore requires
+ * disabling for now
+ */
+ lvp0 {
+ nvidia,pins = "lvp0";
+ nvidia,function = "rsvd3";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
};
};
--
2.14.4
