From: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx> Get rid of the fake clocks simple bus and use node names as per the actual schematics. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx> --- Changes in v2: - Get rid of fake clocks simple bus as suggested by Rob. arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 12 ++++-------- arch/arm/boot/dts/tegra30-colibri.dtsi | 15 ++++----------- 2 files changed, 8 insertions(+), 19 deletions(-) diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts index 2aaf87ba0c42..bcdaeedcbea2 100644 --- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts @@ -133,14 +133,10 @@ pwms = <&pwm 0 5000000>; /* PWM<A> */ }; - clocks { - clk16m: clk@1 { - compatible = "fixed-clock"; - reg = <1>; - #clock-cells = <0>; - clock-frequency = <16000000>; - clock-output-names = "clk16m"; - }; + clk16m: osc3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16000000>; }; gpio-keys { diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index 95b6444a6f05..4fcdc93ae687 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -954,17 +954,10 @@ vbus-supply = <®_lan_v_bus>; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clk@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: xtal1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; }; reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll { -- 2.14.4