Kishon,
On 28-Aug-18 9:55 PM, Tony Lindgren wrote:
> * Kishon Vijay Abraham I <kishon@xxxxxx> [180828 10:31]:
>> AM65 has two PCIe controllers and each PCIe controller has '2' address
>> spaces one within the 4GB address space of the SoC and the other above
>> the 4GB address space of the SoC in addition to the register space. The
>> size of the address space above the 4GB SoC address space is 4GB. These
>> address ranges will be used by CPU/DMA to access the PCIe address space.
>> In order to represent the address space above the 4GB SoC address space
>> and to represent the size of this address space as 4GB, change
>> address-cells and size-cells of interconnect to 2.
> ...
>> cbass_mcu: interconnect@28380000 {
>> compatible = "simple-bus";
>> #address-cells = <1>;
>> #size-cells = <1>;
>
Looking at Table 2-2. MCU Domain Memory Map in TRM, OSPI has similar
need. There are two address ranges to access OSPI flash in memory mapped
mode:
MCU_FSS0_DAT_REG1 0x0050000000 0x0058000000 128 MB(32bit space)
MCU_FSS0_DAT_REG0 0x0400000000 0x0500000000 4 GB(64bit space with ECC)
MCU_FSS0_DAT_REG3 0x0500000000 0x0600000000 4 GB(64bit space w/o ECC)
Since, there are already OSPI flashes with size > 128MB, we would need
to use 4GB address space in kernel (which is above 32 bit space)
Therefore, could you also change cbass_mcu also to have
#address-cells = <2>?
Regards
Vignesh
