Hi Sebastian,
On 31 August 2018 at 05:27, Sebastian Reichel <sre@xxxxxxxxxx> wrote:
> Hi,
>
> On Thu, Aug 30, 2018 at 11:08:59AM +0800, Baolin Wang wrote:
>> >> +static int sc2731_charger_hw_init(struct sc2731_charger_info *info)
>> >> +{
>> >> + int ret;
>> >> +
>> >> + /* Enable charger module */
>> >> + ret = regmap_update_bits(info->regmap, SC2731_MODULE_EN1,
>> >> + SC2731_CHARGE_EN, SC2731_CHARGE_EN);
>> >> + if (ret)
>> >> + return ret;
>> >> +
>> >> + /* Set default charge termination current to 120 mA */
>> >> + ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG2,
>> >> + SC2731_TERMINATION_CUR_MASK, 0x2);
>> >
>> > Looks like DeviceTree property.
>>
>> OK.
>>
>> >
>> >> + if (ret)
>> >> + goto error;
>> >> +
>> >> + /* Set default charge termination voltage to 4.35V */
>> >
>> > Looks like DeviceTree property.
>>
>> OK. Thanks for your comments.
>
> I did not review this in detail, but had quick look at this.
> Please make sure to derive battery specific DT values using
> this:
>
> Documentation/devicetree/bindings/power/supply/battery.txt
Sure. Will look at this file. Thanks.
--
Baolin Wang
Best Regards
