On Thu, 2018-08-30 at 12:39 -0500, Scott Wood wrote:
> On Thu, 2018-08-30 at 07:36 +0000, Vabhav Sharma wrote:
> > > -----Original Message-----
> > > From: linux-kernel-owner@xxxxxxxxxxxxxxx <linux-kernel-
> > > owner@xxxxxxxxxxxxxxx> On Behalf Of Scott Wood
> > > Sent: Wednesday, August 29, 2018 5:49 AM
> > > To: Vabhav Sharma <vabhav.sharma@xxxxxxx>; linux-
> > > kernel@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; robh+dt@xxxxxxxxxx;
> > > mark.rutland@xxxxxxx; linuxppc-dev@xxxxxxxxxxxxxxxx; linux-arm-
> > > kernel@xxxxxxxxxxxxxxxxxxx; mturquette@xxxxxxxxxxxx; sboyd@xxxxxxxxxx;
> > > rjw@xxxxxxxxxxxxx; viresh.kumar@xxxxxxxxxx; linux-clk@xxxxxxxxxxxxxxx;
> > > linux-pm@xxxxxxxxxxxxxxx; linux-kernel-owner@xxxxxxxxxxxxxxx;
> > > catalin.marinas@xxxxxxx; will.deacon@xxxxxxx;
> > > gregkh@xxxxxxxxxxxxxxxxxxx; arnd@xxxxxxxx;
> > > kstewart@xxxxxxxxxxxxxxxxxxx; yamada.masahiro@xxxxxxxxxxxxx
> > > Cc: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>; Andy Tang
> > > <andy.tang@xxxxxxx>; Udit Kumar <udit.kumar@xxxxxxx>;
> > > linux@xxxxxxxxxxxxxxx; Varun Sethi <V.Sethi@xxxxxxx>
> > > Subject: Re: [PATCH 3/5] drivers: clk-qoriq: Add clockgen support for
> > > lx2160a
> > >
> > > On Mon, 2018-08-20 at 12:17 +0530, Vabhav Sharma wrote:
> > > > From: Yogesh Gaur <yogeshnarayan.gaur@xxxxxxx>
> > > >
> > > > Add clockgen support for lx2160a.
> > > > Added entry for compat 'fsl,lx2160a-clockgen'.
> > > > As LX2160A is 16 core, so modified value for NUM_CMUX
> > > >
> > > > Signed-off-by: Tang Yuantian <andy.tang@xxxxxxx>
> > > > Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@xxxxxxx>
> > > > Signed-off-by: Vabhav Sharma <vabhav.sharma@xxxxxxx>
> > > > ---
> > > > drivers/clk/clk-qoriq.c | 14 +++++++++++++-
> > > > drivers/cpufreq/qoriq-cpufreq.c | 1 +
> > > > 2 files changed, 14 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c index
> > > > 3a1812f..fc6e308 100644
> > > > --- a/drivers/clk/clk-qoriq.c
> > > > +++ b/drivers/clk/clk-qoriq.c
> > > > @@ -60,7 +60,7 @@ struct clockgen_muxinfo { };
> > > >
> > > > #define NUM_HWACCEL 5
> > > > -#define NUM_CMUX 8
> > > > +#define NUM_CMUX 16
> > > >
> > > > struct clockgen;
> > > >
> > > > @@ -570,6 +570,17 @@ static const struct clockgen_chipinfo chipinfo[]
> > > > =
> > > > {
> > > > .flags = CG_VER3 | CG_LITTLE_ENDIAN,
> > > > },
> > > > {
> > > > + .compat = "fsl,lx2160a-clockgen",
> > > > + .cmux_groups = {
> > > > + &clockgen2_cmux_cga12, &clockgen2_cmux_cgb
> > > > + },
> > > > + .cmux_to_group = {
> > > > + 0, 0, 0, 0, 1, 1, 1, 1, -1
> > > > + },
> > > > + .pll_mask = 0x37,
> > > > + .flags = CG_VER3 | CG_LITTLE_ENDIAN,
> > > > + },
> > >
> > > Why are you increasing NUM_CMUX beyond 8 for a chip that only has 8
> > > entries in cmux_to_group?
> >
> > Configuration is 16 cores,8 cluster with 2 cores in each cluster
>
> So? This is about cmuxes, not cores. You're increasing the array without
> ever using the new size.
Oh, and you also broke p4080 which has 8 cmuxes but no -1 terminator, because
the array was of length 8. Probably the array should be changed to NUM_CMUX+1
so every array can be -1 terminated.
-Scott
