Re: [PATCH v2] clk: renesas: cpg-mssr: Add R7S9210 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Aug 30, 2018 at 3:05 AM Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:
>
> Hi Rob,
>
> On Wed, Aug 29, 2018 at 2:52 AM Rob Herring <robh@xxxxxxxxxx> wrote:
> > On Mon, Aug 27, 2018 at 11:21:39AM -0500, Chris Brandt wrote:
> > > Add support for the R7S9210 (RZ/A2) Clock Pulse Generator and Module
> > > Standby.
> > >
> > > The Module Standby HW in the RZ/A series is very close to R-Car HW, except
> > > for how the registers are laid out.
> > > The MSTP registers are only 8-bits wide, there is no status registers
> > > (MSTPST), and the register offsets are a little different. Since the RZ/A
> > > hardware manuals refer to these registers as the Standby Control Registers,
> > > we'll use that name to distinguish the RZ/A type for the R-Car type.
> > >
> > > Signed-off-by: Chris Brandt <chris.brandt@xxxxxxxxxxx>
> > > ---
> >
> > > +++ b/drivers/clk/renesas/r7s9210-cpg-mssr.c
> > > @@ -0,0 +1,192 @@
> > > +// SPDX-License-Identifier: GPL-2.0+
> > > +/*
> >
> >
> > > +++ b/include/dt-bindings/clock/r7s9210-cpg-mssr.h
> > > @@ -0,0 +1,21 @@
> > > +/* SPDX-License-Identifier: GPL-2.0+
> >
> > The proper identifier is GPL-2.0-or-later
>
> Documentation/process/license-rules.rst disagrees.

Indeed, but: https://spdx.org/licenses/GPL-2.0+.html

I think this changed about the time the kernel adopted SPDX. I guess
it is fine as-is until we change the documentation.

Rob



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux