The driver missed an of_xlate function to translate gpio numbers
as found in the DT to the correct chip and number.
While there I've set #gpio_cells to a fixed value of 2.
I've used gpio-pxa.c as template for those changes and tested my changes
successfully on a da850 board using entries for gpio-leds in a DT. So I didn't
reinvent the wheel but just copied and tested stuff.
Thanks to Grygorii Strashko for the hint to the existing code in gpio-pxa.
Signed-off-by: Alexander Holler <holler@xxxxxxxxxxxxx>
Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
---
drivers/gpio/gpio-davinci.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
Changes in v2: replaced static variables by indirections.
diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
index 7629b4f..92574a0 100644
--- a/drivers/gpio/gpio-davinci.c
+++ b/drivers/gpio/gpio-davinci.c
@@ -172,6 +172,27 @@ of_err:
return NULL;
}
+#ifdef CONFIG_OF_GPIO
+static int davinci_gpio_of_xlate(struct gpio_chip *gc,
+ const struct of_phandle_args *gpiospec,
+ u32 *flags)
+{
+ struct davinci_gpio_controller *chips = dev_get_drvdata(gc->dev);
+ struct davinci_gpio_platform_data *pdata = dev_get_platdata(gc->dev);
+
+ if (gpiospec->args[0] > pdata->ngpio)
+ return -EINVAL;
+
+ if (gc != &chips[gpiospec->args[0] / 32].chip)
+ return -EINVAL;
+
+ if (flags)
+ *flags = gpiospec->args[1];
+
+ return gpiospec->args[0] % 32;
+}
+#endif
+
static int davinci_gpio_probe(struct platform_device *pdev)
{
int i, base;
@@ -236,6 +257,9 @@ static int davinci_gpio_probe(struct platform_device *pdev)
chips[i].chip.ngpio = 32;
#ifdef CONFIG_OF_GPIO
+ chips[i].chip.of_gpio_n_cells = 2;
+ chips[i].chip.of_xlate = davinci_gpio_of_xlate;
+ chips[i].chip.dev = dev;
chips[i].chip.of_node = dev->of_node;
#endif
spin_lock_init(&chips[i].lock);
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
