On 29.08.2018 18:20, Codrin Ciubotariu wrote:
On 29.08.2018 17:53, Mark Brown wrote:
On Wed, Aug 29, 2018 at 05:47:26PM +0300, Codrin Ciubotariu wrote:
+static const unsigned int wm8731_rates_12288000[] = {
+ 8000, 32000, 48000, 96000,
+};
+
+static struct snd_pcm_hw_constraint_list wm8731_constraints_12288000
= {
+ .list = wm8731_rates_12288000,
+ .count = ARRAY_SIZE(wm8731_rates_12288000),
+};
+
+static int snd_proto_startup(struct snd_pcm_substream *substream)
+{
+ /* Setup constraints, because there is a 12.288 MHz XTAL on the
board */
+ snd_pcm_hw_constraint_list(substream->runtime, 0,
+ SNDRV_PCM_HW_PARAM_RATE,
+ &wm8731_constraints_12288000);
+ return 0;
+}
This bit is better added to the CODEC driver since it'll apply to any
system where there's this clock rate (someone else could come in and add
other rates, no need to do that yourself though it'd be nice of course).
I could do it.
It looks like these constraints are already in the wm8731 driver. I will
wait for more comments and then I will send a v2 without this part.
Thanks and best regards,
Codrin
