Re: [PATCH v7 05/24] clocksource: Add a new timer-ingenic driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 28/08/2018 19:23, Paul Burton wrote:
> Hi Daniel & Thomas,
> 
> On Tue, Aug 21, 2018 at 07:16:16PM +0200, Paul Cercueil wrote:
>> This driver handles the TCU (Timer Counter Unit) present on the Ingenic
>> JZ47xx SoCs, and provides the kernel with a system timer, and optionally
>> with a clocksource and a sched_clock.
>>
>> It also provides clocks and interrupt handling to client drivers.
>>
>> Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
>> ---
>>
>> Notes:
>>      v2: Use SPDX identifier for the license
>>     
>>      v3: - Move documentation to its own patch
>>          - Search the devicetree for PWM clients, and use all the TCU
>>     	   channels that won't be used for PWM
>>     
>>      v4: - Add documentation about why we search for PWM clients
>>          - Verify that the PWM clients are for the TCU PWM driver
>>     
>>      v5: Major overhaul. Too many changes to list. Consider it's a new
>>          patch.
>>     
>>      v6: - Add two API functions ingenic_tcu_request_channel and
>>            ingenic_tcu_release_channel. To be used by the PWM driver to
>>            request the use of a TCU channel. The driver will now dynamically
>>            move away the system timer or clocksource to a new TCU channel.
>>          - The system timer now defaults to channel 0, the clocksource now
>>            defaults to channel 1 and is no more optional. The
>>            ingenic,timer-channel and ingenic,clocksource-channel devicetree
>>            properties are now gone.
>>          - Fix round_rate / set_rate not calculating the prescale divider
>>            the same way. This caused problems when (parent_rate / div) would
>>            give a non-integer result. The behaviour is correct now.
>>          - The clocksource clock is turned off on suspend now.
>>     
>>      v7: Fix section mismatch by using builtin_platform_driver_probe()
>>
>>  drivers/clocksource/Kconfig         |   10 +
>>  drivers/clocksource/Makefile        |    1 +
>>  drivers/clocksource/ingenic-timer.c | 1124 +++++++++++++++++++++++++++++++++++
>>  drivers/clocksource/ingenic-timer.h |   15 +
>>  include/linux/mfd/ingenic-tcu.h     |    3 +
>>  5 files changed, 1153 insertions(+)
>>  create mode 100644 drivers/clocksource/ingenic-timer.c
>>  create mode 100644 drivers/clocksource/ingenic-timer.h
>> %
> 
> How is this & patch 6 of the series looking to you from a
> drivers/clocksource perspective?

The presence of completion, mutexes, etc ... makes me think the driver
is not going to the right direction.

I have to review the drivers again but it will take some time because
I'm returning from vacations and there are a trillion emails to sort out :/

> If you're happy with them it'd be great to get an ack so I can take this
> through the MIPS tree with the rest of the series. The alternative would
> be to get the drivers in first then the MIPS bits in the next release
> cycle.
> 
> Thanks,
>     Paul
> 


-- 
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux