Re: [PATCH v2 1/2] GPIO: add single-register gpio via creg driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

I don't see any updates/corrections here.  :(

On 08/28/2018 04:27 AM, Eugeniy Paltsev wrote:

> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 71c0ab46f216..0f9cc1582cab 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -430,6 +430,15 @@ config GPIO_REG
>  	  A 32-bit single register GPIO fixed in/out implementation.  This
>  	  can be used to represent any register as a set of GPIO signals.
>  
> +config GPIO_SNPS_CREG
> +	bool "GPIO via CREG (Control REGisers) driver"
> +	select OF_GPIO
> +	help
> +	  This driver supports GPIOs via CREG on various Synopsys SoCs.
> +	  This is is single-register MMIO gpio driver for complex cases
> +	  where only several fields in register belong to GPIO and
> +	  each GPIO owns field with different length and on/off values.
> +
>  config GPIO_SPEAR_SPICS
>  	bool "ST SPEAr13xx SPI Chip Select as GPIO support"
>  	depends on PLAT_SPEAR


-- 
~Randy



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux