Make the DT usable with the panel-lvds driver.
Signed-off-by: Peter Rosin <peda@xxxxxxxxxx>
---
arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 22 +++++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
index 2eb0f947ab86..97e972aefac2 100644
--- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
+++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
@@ -105,10 +105,29 @@
};
panel: panel {
- compatible = "sharp,lq150x1lg11";
+ compatible = "sharp,lq150x1lg11", "panel-lvds";
+
backlight = <&panel_bl>;
power-supply = <&panel_reg>;
+ width-mm = <304>;
+ height-mm = <228>;
+
+ data-mapping = "jeida-18";
+
+ panel-timing {
+ // 1024x768 @ 60Hz (typical)
+ clock-frequency = <50000000 65000000 80000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hfront-porch = <48 88 88>;
+ hback-porch = <96 168 168>;
+ hsync-len = <32 64 64>;
+ vsync-len = <3 13 74>;
+ vfront-porch = <3 13 74>;
+ vback-porch = <3 12 74>;
+ };
+
port {
panel_input: endpoint {
remote-endpoint = <&lvds_encoder_output>;
@@ -205,6 +224,7 @@
port@0 {
hlcdc_output: endpoint {
remote-endpoint = <&lvds_encoder_input>;
+ bus-width = <16>;
};
};
};
--
2.11.0
