AT91_PINCTRL_OUTPUT_VAL(0) without AT91_PINCTRL_OUTPUT is a no-op, so
make sure the pins really output a zero.
Fixes: 0e4323899973 ("ARM: dts: at91: add devicetree for the Axentia Nattis with Natte power")
Signed-off-by: Peter Rosin <peda@xxxxxxxxxx>
---
arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
index af9f38456d04..bfa5815a0721 100644
--- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
+++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
@@ -38,14 +38,16 @@
atmel,pins =
<AT91_PIOA 21
AT91_PERIPH_GPIO
- AT91_PINCTRL_OUTPUT_VAL(0)>;
+ (AT91_PINCTRL_OUTPUT |
+ AT91_PINCTRL_OUTPUT_VAL(0))>;
};
pinctrl_lcd_hipow0: lcd_hipow0 {
atmel,pins =
<AT91_PIOA 23
AT91_PERIPH_GPIO
- AT91_PINCTRL_OUTPUT_VAL(0)>;
+ (AT91_PINCTRL_OUTPUT |
+ AT91_PINCTRL_OUTPUT_VAL(0))>;
};
};
};
--
2.11.0
