Re: [PATCH v12 14/14] cpufreq: qcom: Add support for krait based socs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Aug 14, 2018 at 05:42:33PM +0530, Sricharan R wrote:
> In Certain QCOM SoCs like ipq8064, apq8064, msm8960, msm8974
> that has KRAIT processors the voltage/current value of each OPP
> varies based on the silicon variant in use.
> 
> The required OPP related data is determined based on
> the efuse value. This is similar to the existing code for
> kryo cores. So adding support for krait cores here.
> 
> Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/opp/qcom-nvmem-cpufreq.txt |   3 +-
>  drivers/cpufreq/Kconfig.arm                        |   2 +-
>  drivers/cpufreq/cpufreq-dt-platdev.c               |   5 +
>  drivers/cpufreq/qcom-cpufreq-nvmem.c               | 151 +++++++++++++++++++--
>  4 files changed, 149 insertions(+), 12 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
> index 6dcdfcd..7bc0f1a 100644
> --- a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
> +++ b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
> @@ -19,7 +19,8 @@ In 'cpus' nodes:
>  
>  In 'operating-points-v2' table:
>  - compatible: Should be
> -	- 'operating-points-v2-qcom-cpu' for apq8096 and msm8996.
> +	- 'operating-points-v2-qcom-cpu' for apq8096, msm8996, msm8974,
> +					     apq8064, msm8960 and ipq8074.
>  - nvmem-cells: A phandle pointing to a nvmem-cells node representing the
>  		efuse registers that has information about the
>  		speedbin that is used to select the right frequency/voltage
> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> index 13fbd97..497ae89 100644
> --- a/drivers/cpufreq/Kconfig.arm
> +++ b/drivers/cpufreq/Kconfig.arm
> @@ -126,7 +126,7 @@ config ARM_OMAP2PLUS_CPUFREQ
>  
>  config ARM_QCOM_CPUFREQ_NVMEM
>  	tristate "Qualcomm nvmem based CPUFreq"
> -	depends on ARM64
> +	depends on ARCH_QCOM
>  	depends on QCOM_QFPROM
>  	depends on QCOM_SMEM
>  	select PM_OPP
> diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
> index fe14c57..917cdc2 100644
> --- a/drivers/cpufreq/cpufreq-dt-platdev.c
> +++ b/drivers/cpufreq/cpufreq-dt-platdev.c
> @@ -128,6 +128,11 @@
>  	{ .compatible = "ti,am43", },
>  	{ .compatible = "ti,dra7", },
>  
> +	{ .compatible = "qcom,ipq8064", },
> +	{ .compatible = "qcom,apq8064", },
> +	{ .compatible = "qcom,msm8974", },
> +	{ .compatible = "qcom,msm8960", },
> +
>  	{ }
>  };
>  
> diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c
> index 0ad8e5b..5f2add0 100644
> --- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
> +++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
> @@ -45,6 +45,82 @@ enum _msm8996_version {
>  
>  static struct platform_device *cpufreq_dt_pdev, *cpufreq_pdev;
>  
> +static void __init get_krait_bin_format_a(int *speed, int *pvs, int *pvs_ver,
> +					  struct nvmem_cell *pvs_nvmem, u8 *buf)

Hello Sricharan,

pvs_nvmem seems to be unused both here and in get_krait_bin_format_b().

Kind regards,
Niklas

> +{
> +	u32 pte_efuse;
> +
> +	pte_efuse = *((u32 *)buf);
> +
> +	*speed = pte_efuse & 0xf;
> +	if (*speed == 0xf)
> +		*speed = (pte_efuse >> 4) & 0xf;
> +
> +	if (*speed == 0xf) {
> +		*speed = 0;
> +		pr_warn("Speed bin: Defaulting to %d\n", *speed);
> +	} else {
> +		pr_info("Speed bin: %d\n", *speed);
> +	}
> +
> +	*pvs = (pte_efuse >> 10) & 0x7;
> +	if (*pvs == 0x7)
> +		*pvs = (pte_efuse >> 13) & 0x7;
> +
> +	if (*pvs == 0x7) {
> +		*pvs = 0;
> +		pr_warn("PVS bin: Defaulting to %d\n", *pvs);
> +	} else {
> +		pr_info("PVS bin: %d\n", *pvs);
> +	}
> +
> +	kfree(buf);
> +}
> +
> +static void __init get_krait_bin_format_b(int *speed, int *pvs, int *pvs_ver,
> +					  struct nvmem_cell *pvs_nvmem, u8 *buf)
> +{
> +	u32 pte_efuse, redundant_sel;
> +
> +	pte_efuse = *((u32 *)buf);
> +	redundant_sel = (pte_efuse >> 24) & 0x7;
> +	*speed = pte_efuse & 0x7;
> +
> +	/* 4 bits of PVS are in efuse register bits 31, 8-6. */
> +	*pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7);
> +	*pvs_ver = (pte_efuse >> 4) & 0x3;
> +
> +	switch (redundant_sel) {
> +	case 1:
> +		*speed = (pte_efuse >> 27) & 0xf;
> +		break;
> +	case 2:
> +		*pvs = (pte_efuse >> 27) & 0xf;
> +		break;
> +	}
> +
> +	/* Check SPEED_BIN_BLOW_STATUS */
> +	if (pte_efuse & BIT(3)) {
> +		pr_info("Speed bin: %d\n", *speed);
> +	} else {
> +		pr_warn("Speed bin not set. Defaulting to 0!\n");
> +		*speed = 0;
> +	}
> +
> +	/* Check PVS_BLOW_STATUS */
> +	pte_efuse = *(((u32 *)buf) + 4);
> +	pte_efuse &= BIT(21);
> +	if (pte_efuse) {
> +		pr_info("PVS bin: %d\n", *pvs);
> +	} else {
> +		pr_warn("PVS bin not set. Defaulting to 0!\n");
> +		*pvs = 0;
> +	}
> +
> +	pr_info("PVS version: %d\n", *pvs_ver);
> +	kfree(buf);
> +}
> +
>  static enum _msm8996_version __init qcom_cpufreq_get_msm_id(void)
>  {
>  	size_t len;
> @@ -74,6 +150,35 @@ static enum _msm8996_version __init qcom_cpufreq_get_msm_id(void)
>  	return version;
>  }
>  
> +static int qcom_cpufreq_krait_name_version(struct device *cpu_dev,
> +					   struct nvmem_cell *speedbin_nvmem,
> +					   char **name,
> +					   u32 *versions)
> +{
> +	int speed = 0, pvs = 0, pvs_ver = 0;
> +	u8 *buf;
> +	size_t len;
> +
> +	buf = nvmem_cell_read(speedbin_nvmem, &len);
> +	if (len == 4) {
> +		get_krait_bin_format_a(&speed, &pvs, &pvs_ver,
> +				       speedbin_nvmem, buf);
> +	} else if (len == 8) {
> +		get_krait_bin_format_b(&speed, &pvs, &pvs_ver,
> +				       speedbin_nvmem, buf);
> +	} else {
> +		dev_err(cpu_dev, "Unable to read nvmem data. Defaulting to 0!\n");
> +		return -ENODEV;
> +	}
> +
> +	snprintf(*name, sizeof("speedXX-pvsXX-vXX"), "speed%d-pvs%d-v%d",
> +		 speed, pvs, pvs_ver);
> +
> +	*versions = (1 << speed);
> +
> +	return 0;
> +}
> +
>  static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
>  					  struct nvmem_cell *speedbin_nvmem,
>  					  char **pvs_name,
> @@ -83,6 +188,7 @@ static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
>  	u8 *speedbin;
>  	enum _msm8996_version msm8996_version;
>  
> +	*pvs_name = NULL;
>  	msm8996_version = qcom_cpufreq_get_msm_id();
>  	if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
>  		dev_err(cpu_dev, "Not Snapdragon 820/821!");
> @@ -111,7 +217,7 @@ static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
>  
>  static int qcom_cpufreq_probe(struct platform_device *pdev)
>  {
> -	struct opp_table *opp_tables[NR_CPUS] = { NULL };
> +	struct opp_table *tbl1[NR_CPUS] = { NULL }, *tbl2[NR_CPUS] = { NULL };
>  	int (*get_version)(struct device *cpu_dev,
>  			   struct nvmem_cell *speedbin_nvmem,
>  			   char **name, int *versions);
> @@ -120,8 +226,8 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
>  	struct device *cpu_dev;
>  	unsigned cpu;
>  	u32 versions;
> -	char *pvs_name = NULL;
>  	const struct of_device_id *match;
> +	char *pvs_name = "speedXX-pvsXX-vXX";
>  	int ret;
>  
>  	cpu_dev = get_cpu_device(0);
> @@ -163,10 +269,19 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
>  			goto free_opp;
>  		}
>  
> -		opp_tables[cpu] = dev_pm_opp_set_supported_hw(cpu_dev,
> -							      &versions, 1);
> -		if (IS_ERR(opp_tables[cpu])) {
> -			ret = PTR_ERR(opp_tables[cpu]);
> +		if (pvs_name) {
> +			tbl1[cpu] = dev_pm_opp_set_prop_name(cpu_dev, pvs_name);
> +			if (IS_ERR(tbl1[cpu])) {
> +				ret = PTR_ERR(tbl1[cpu]);
> +				dev_err(cpu_dev, "Failed to add OPP name %s\n",
> +					pvs_name);
> +				goto free_opp;
> +			}
> +		}
> +
> +		tbl2[cpu] = dev_pm_opp_set_supported_hw(cpu_dev, &versions, 1);
> +		if (IS_ERR(tbl2[cpu])) {
> +			ret = PTR_ERR(tbl2[cpu]);
>  			dev_err(cpu_dev, "Failed to set supported hardware\n");
>  			goto free_opp;
>  		}
> @@ -182,9 +297,15 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
>  
>  free_opp:
>  	for_each_possible_cpu(cpu) {
> -		if (IS_ERR_OR_NULL(opp_tables[cpu]))
> +		if (IS_ERR_OR_NULL(tbl1[cpu]))
> +			break;
> +		dev_pm_opp_put_prop_name(tbl1[cpu]);
> +	}
> +
> +	for_each_possible_cpu(cpu) {
> +		if (IS_ERR_OR_NULL(tbl2[cpu]))
>  			break;
> -		dev_pm_opp_put_supported_hw(opp_tables[cpu]);
> +		dev_pm_opp_put_supported_hw(tbl2[cpu]);
>  	}
>  
>  	return ret;
> @@ -205,8 +326,18 @@ static int qcom_cpufreq_remove(struct platform_device *pdev)
>  };
>  
>  static const struct of_device_id qcom_cpufreq_match_list[] __initconst = {
> -	{ .compatible = "qcom,apq8096", .data = qcom_cpufreq_kryo_name_version},
> -	{ .compatible = "qcom,msm8996", .data = qcom_cpufreq_kryo_name_version},
> +	{ .compatible = "qcom,apq8096",
> +	  .data = qcom_cpufreq_kryo_name_version},
> +	{ .compatible = "qcom,msm8996",
> +	  .data = qcom_cpufreq_kryo_name_version},
> +	{ .compatible = "qcom,ipq8064",
> +	  .data = qcom_cpufreq_krait_name_version },
> +	{ .compatible = "qcom,apq8064",
> +	  .data = qcom_cpufreq_krait_name_version },
> +	{ .compatible = "qcom,msm8974",
> +	  .data = qcom_cpufreq_krait_name_version },
> +	{ .compatible = "qcom,msm8960",
> +	  .data = qcom_cpufreq_krait_name_version },
>  	{},
>  };
>  
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux