On Tue, Mar 04, 2014 at 03:34:45PM +0100, Vincent Stehlé wrote: > Use the red gpio led for heartbeat. Some people think it's annoying to have a LED blinking all the time. Since it's a user defined LED, let's leave it to users for their particular use case. Shawn > > Signed-off-by: Vincent Stehlé <vincent.stehle@xxxxxxxxxxxxx> > Cc: Shawn Guo <shawn.guo@xxxxxxxxxx> > Cc: Sascha Hauer <kernel@xxxxxxxxxxxxxx> > --- > > Hi, > > This has been tested on Sabre SD i.MX6 Quad board, with linux v3.14-rc5+ and > imx_v6_v7_defconfig. > > As a side note, checkpatch.pl complains about gpio-leds being undocumented, but > I am not sure what to do about that. > > Best regards, > > V. > > arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi > index e75e11b..cf4d736 100644 > --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi > +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi > @@ -88,6 +88,16 @@ > default-brightness-level = <7>; > status = "okay"; > }; > + > + leds { > + compatible = "gpio-leds"; > + > + heartbeat-led { > + label = "Heartbeat"; > + gpios = <&gpio1 2 0>; > + linux,default-trigger = "heartbeat"; > + }; > + }; > }; > > &audmux { > @@ -182,6 +192,7 @@ > MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 > MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 > MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000 > + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 > >; > }; > }; > -- > 1.9.0 > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html