Hi!
> +/**
> + * struct lm3697 -
> + * @enable_gpio - Hardware enable gpio
> + * @regulator - LED supply regulator pointer
> + * @client - Pointer to the I2C client
> + * @regmap - Devices register map
> + * @dev - Pointer to the devices device struct
> + * @lock - Lock for reading/writing the device
> + * @leds - Array of LED strings.
> + */
extra .
> + ret = regmap_write(led->priv->regmap, brt_msb_reg, brt_val);
> + if (ret) {
> + dev_err(&led->priv->client->dev, "Cannot write MSB\n");
> + goto out;
> + }
> +out:
I'd avoid this goto.
> +static int lm3697_set_control_bank(struct lm3697 *priv)
> +{
> + u8 control_bank_config = 0;
> + struct lm3697_led *led;
> + int ret, i;
> +
> + led = &priv->leds[0];
> + if (led->control_bank == LM3697_CONTROL_A)
> + led = &priv->leds[1];
I'd expect CONTROL_A to correspond to leds[0]...?
> + for (i = 0; i < LM3697_MAX_LED_STRINGS; i++) {
> + if (led->hvled_strings[i] == LM3697_HVLED_ASSIGNMENT)
> + control_bank_config |= 1 << i;
> + }
Extra {}s.
> + priv->regulator = devm_regulator_get(&priv->client->dev, "vled");
> + if (IS_ERR(priv->regulator))
> + priv->regulator = NULL;
If vled regulator is specified in dt and _get fails, is it worth a
warning?
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Attachment:
signature.asc
Description: Digital signature
