Re: [PATCH 1/2] dt-bindings: dmaengine: add DT binding for UniPhier MIO DMAC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jassi,


2018-08-21 19:44 GMT+09:00 Jassi Brar <jaswinder.singh@xxxxxxxxxx>:
> On 21 August 2018 at 15:17, Masahiro Yamada
> <yamada.masahiro@xxxxxxxxxxxxx> wrote:
>> (+CC Rob, DT, LKML)
>>
>> I forgot to CC this to DT community...
>>
>>
>> 2018-08-21 18:30 GMT+09:00 Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>:
>>> The MIO DMAC (Media IO DMA Controller) is used in UniPhier LD4,
>>> Pro4, and sLD8 SoCs.
>>>
>>> Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
>>> ---
>>>
>>>  .../devicetree/bindings/dma/uniphier-mio-dmac.txt  | 28 ++++++++++++++++++++++
>>>  1 file changed, 28 insertions(+)
>>>  create mode 100644 Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt b/Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt
>>> new file mode 100644
>>> index 0000000..a9e969e
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt
>>> @@ -0,0 +1,28 @@
>>> +UniPhier Media IO DMA controller
>>> +
>>> +This works as an external DMA engine for SD/eMMC controllers etc.
>>> +found in UniPhier LD4, Pro4, sLD8 SoCs.
>>> +
>>> +Required properties:
>>> +- compatible: should be "socionext,uniphier-mio-dmac".
>>> +- reg: offset and length of the register set for the device.
>>> +- interrupts: a list of interrupt specifiers associated with the DMA channels.
>>> +- clocks: a single clock specifier
>>> +- #dma-cells: should be <1>. The single cell represents the channel number.
>>> +- dma-channels: specify the number of the DMA channels. This should match to
>>> +  the number of tuples in the interrupts property.
>>> +
> Can we not infer the number of channels from interrupt tuples? After
> all the driver assumes they are same.


It would be possible to count the number of tuples
in "interrupts".



I know of_irq_count(), but I do not see any driver
in drivers/dma/ that calls it.


I guess the reason is that of_irq_count() is not exported,
so tristate drivers like this cannot use it.


I checked Documentation/devicetree/bindings/dma/,
and some controllers specify _redundant_ dma-channels property.

fsl-mxs-dma.txt
renesas,rcar-dmac.txt
renesas,usb-dmac.txt



I also see counter-implementation.


bcm2835-dma.c hard-codes the number of channels in the driver.
tegra210-adma.c associates nr_channels with compatible string.



I will wait for comments from the maintainers.

If desired, I will export of_irq_count()
and use it from my driver.



Thanks.

-- 
Best Regards
Masahiro Yamada



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux