This patch adds ST Keyscan driver to use the keypad hw a subset
of ST boards provide. Specific board setup will be put in the
given dt.
Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@xxxxxx>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@xxxxxx>
---
.../devicetree/bindings/input/st-keypad.txt | 50 ++++
drivers/input/keyboard/Kconfig | 12 +
drivers/input/keyboard/Makefile | 1 +
drivers/input/keyboard/st-keyscan.c | 323 +++++++++++++++++++++
4 files changed, 386 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/st-keypad.txt
create mode 100644 drivers/input/keyboard/st-keyscan.c
diff --git a/Documentation/devicetree/bindings/input/st-keypad.txt b/Documentation/devicetree/bindings/input/st-keypad.txt
new file mode 100644
index 0000000..63eb07a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/st-keypad.txt
@@ -0,0 +1,50 @@
+* ST Keypad controller device tree bindings
+
+The ST keypad controller device tree binding is based on the
+matrix-keymap.
+
+Required properties:
+
+- compatible: "st,keypad"
+
+- reg: Register base address of st-keypad controler.
+
+- interrupts: Interrupt numberof st-keypad controler.
+
+- clocks: Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+
+- pinctrl-0: Should specify pin control groups used for this controller.
+
+- pinctrl-names: Should contain only one value - "default".
+
+- linux,keymap: The keymap for keys as described in the binding document
+ devicetree/bindings/input/matrix-keymap.txt.
+
+- keypad,num-rows: Number of row lines connected to the keypad controller.
+
+- keypad,num-columns: Number of column lines connected to the keypad
+ controller.
+
+- st,debounce_us: Debouncing interval time in microseconds
+
+
+Example:
+
+keyscan: keyscan@fe4b0000 {
+ compatible = "st,keypad";
+ reg = <0xfe4b0000 0x2000>;
+ interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>;
+ clocks = <&CLK_SYSIN>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_keyscan>;
+
+ keypad,num-rows = <4>;
+ keypad,num-columns = <4>;
+ st,debounce_us = <5000>;
+ linux,keymap = < /* in0 in1 in2 in3 */
+ KEY_F13 KEY_F9 KEY_F5 KEY_F1 /* out0 */
+ KEY_F14 KEY_F10 KEY_F6 KEY_F2 /* out1 */
+ KEY_F15 KEY_F11 KEY_F7 KEY_F3 /* out2 */
+ KEY_F16 KEY_F12 KEY_F8 KEY_F4 >; /* out3 */
+};
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index a673c9f..9e29125 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -512,6 +512,18 @@ config KEYBOARD_STOWAWAY
To compile this driver as a module, choose M here: the
module will be called stowaway.
+config KEYBOARD_ST_KEYSCAN
+ tristate "STMicroelectronics keyscan support"
+ depends on ARCH_STI
+ select INPUT_EVDEV
+ select INPUT_MATRIXKMAP
+ help
+ Say Y here if you want to use a keypad attached to the keyscan block
+ on some STMicroelectronics SoC devices.
+
+ To compile this driver as a module, choose M here: the
+ module will be called stm-keyscan.
+
config KEYBOARD_SUNKBD
tristate "Sun Type 4 and Type 5 keyboard"
select SERIO
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index a699b61..5fd020a 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -50,6 +50,7 @@ obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o
obj-$(CONFIG_KEYBOARD_SPEAR) += spear-keyboard.o
obj-$(CONFIG_KEYBOARD_STMPE) += stmpe-keypad.o
obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o
+obj-$(CONFIG_KEYBOARD_ST_KEYSCAN) += st-keyscan.o
obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o
obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o
obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o
diff --git a/drivers/input/keyboard/st-keyscan.c b/drivers/input/keyboard/st-keyscan.c
new file mode 100644
index 0000000..606cc19
--- /dev/null
+++ b/drivers/input/keyboard/st-keyscan.c
@@ -0,0 +1,323 @@
+/*
+ * STMicroelectronics Key Scanning driver
+ *
+ * Copyright (c) 2014 STMicroelectonics Ltd.
+ * Author: Stuart Menefy <stuart.menefy@xxxxxx>
+ *
+ * Based on sh_keysc.c, copyright 2008 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/input/matrix_keypad.h>
+
+#define ST_KEYSCAN_MAXKEYS 16
+
+#define KEYSCAN_CONFIG_OFF 0x000
+#define KEYSCAN_CONFIG_ENABLE 1
+#define KEYSCAN_DEBOUNCE_TIME_OFF 0x004
+#define KEYSCAN_MATRIX_STATE_OFF 0x008
+#define KEYSCAN_MATRIX_DIM_OFF 0x00c
+#define KEYSCAN_MATRIX_DIM_X_SHIFT 0
+#define KEYSCAN_MATRIX_DIM_Y_SHIFT 2
+
+struct keypad_platform_data {
+ const struct matrix_keymap_data *keymap_data;
+ unsigned int num_out_pads;
+ unsigned int num_in_pads;
+ unsigned int debounce_us;
+};
+
+struct keyscan_priv {
+ void __iomem *base;
+ int irq;
+ struct clk *clk;
+ struct input_dev *input_dev;
+ struct keypad_platform_data *config;
+ unsigned int last_state;
+ u32 keycodes[ST_KEYSCAN_MAXKEYS];
+};
+
+static irqreturn_t keyscan_isr(int irq, void *dev_id)
+{
+ struct platform_device *pdev = dev_id;
+ struct keyscan_priv *priv = platform_get_drvdata(pdev);
+ int state;
+ int change;
+
+ state = readl(priv->base + KEYSCAN_MATRIX_STATE_OFF) & 0xffff;
+ change = priv->last_state ^ state;
+
+ while (change) {
+ int scancode = __ffs(change);
+ int down = state & (1 << scancode);
+
+ input_report_key(priv->input_dev, priv->keycodes[scancode],
+ down);
+ change ^= 1 << scancode;
+ };
+
+ input_sync(priv->input_dev);
+
+ priv->last_state = state;
+
+ return IRQ_HANDLED;
+}
+
+static void keyscan_start(struct keyscan_priv *priv)
+{
+ clk_enable(priv->clk);
+
+ writel(priv->config->debounce_us * (clk_get_rate(priv->clk) / 1000000),
+ priv->base + KEYSCAN_DEBOUNCE_TIME_OFF);
+
+ writel(((priv->config->num_in_pads - 1) << KEYSCAN_MATRIX_DIM_X_SHIFT) |
+ ((priv->config->num_out_pads - 1) << KEYSCAN_MATRIX_DIM_Y_SHIFT),
+ priv->base + KEYSCAN_MATRIX_DIM_OFF);
+
+ writel(KEYSCAN_CONFIG_ENABLE, priv->base + KEYSCAN_CONFIG_OFF);
+}
+
+static void keyscan_stop(struct keyscan_priv *priv)
+{
+ writel(0, priv->base + KEYSCAN_CONFIG_OFF);
+
+ clk_disable(priv->clk);
+}
+
+static int keypad_matrix_key_parse_dt(struct keyscan_priv *st_kp)
+{
+ struct device *dev = st_kp->input_dev->dev.parent;
+ struct device_node *np = dev->of_node;
+ struct keypad_platform_data *pdata;
+ int error;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(dev, "failed to allocate driver pdata\n");
+ return -ENOMEM;
+ }
+
+ error = matrix_keypad_parse_of_params(dev, &pdata->num_out_pads,
+ &pdata->num_in_pads);
+ if (error) {
+ dev_err(dev, "failed to parse keypad params\n");
+ return error;
+ }
+
+ of_property_read_u32(np, "st,debounce_us", &pdata->debounce_us);
+
+ st_kp->config = pdata;
+
+ dev_info(dev, "rows=%d col=%d debounce=%d\n",
+ pdata->num_out_pads,
+ pdata->num_in_pads,
+ pdata->debounce_us);
+
+ error = of_property_read_u32_array(np, "linux,keymap",
+ st_kp->keycodes, ST_KEYSCAN_MAXKEYS);
+ if (error) {
+ dev_err(dev, "failed to parse keymap\n");
+ return error;
+ }
+
+ return 0;
+}
+
+static int __init keyscan_probe(struct platform_device *pdev)
+{
+ struct keypad_platform_data *pdata =
+ dev_get_platdata(&pdev->dev);
+ struct keyscan_priv *st_kp;
+ struct input_dev *input_dev;
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ int len;
+ int error;
+ int i;
+
+ if (!pdata && !pdev->dev.of_node) {
+ dev_err(&pdev->dev, "no keymap defined\n");
+ return -EINVAL;
+ }
+
+ st_kp = devm_kzalloc(dev, sizeof(*st_kp), GFP_KERNEL);
+ if (!st_kp) {
+ dev_err(dev, "failed to allocate driver data\n");
+ return -ENOMEM;
+ }
+ st_kp->config = pdata;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "no I/O memory specified\n");
+ return -ENXIO;
+ }
+
+ len = resource_size(res);
+ if (!devm_request_mem_region(dev, res->start, len, pdev->name)) {
+ dev_err(dev, "failed to reserve I/O memory\n");
+ return -EBUSY;
+ }
+
+ st_kp->base = devm_ioremap_nocache(dev, res->start, len);
+ if (st_kp->base == NULL) {
+ dev_err(dev, "failed to remap I/O memory\n");
+ return -ENXIO;
+ }
+
+ st_kp->irq = platform_get_irq(pdev, 0);
+ if (st_kp->irq < 0) {
+ dev_err(dev, "no IRQ specified\n");
+ return -ENXIO;
+ }
+
+ error = devm_request_irq(dev, st_kp->irq, keyscan_isr, 0,
+ pdev->name, pdev);
+ if (error) {
+ dev_err(dev, "failed to request IRQ\n");
+ return error;
+ }
+
+ input_dev = devm_input_allocate_device(&pdev->dev);
+ if (!input_dev) {
+ dev_err(&pdev->dev, "failed to allocate the input device\n");
+ return -ENOMEM;
+ }
+
+ st_kp->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(st_kp->clk)) {
+ dev_err(dev, "cannot get clock");
+ return PTR_ERR(st_kp->clk);
+ }
+
+ input_dev = input_allocate_device();
+ if (!input_dev) {
+ dev_err(dev, "failed to allocate input device\n");
+ return -ENOMEM;
+ }
+ st_kp->input_dev = input_dev;
+
+ input_dev->name = pdev->name;
+ input_dev->phys = "keyscan-keys/input0";
+ input_dev->dev.parent = dev;
+
+ input_dev->id.bustype = BUS_HOST;
+ input_dev->id.vendor = 0x0001;
+ input_dev->id.product = 0x0001;
+ input_dev->id.version = 0x0100;
+
+ if (!pdata) {
+ error = keypad_matrix_key_parse_dt(st_kp);
+ if (error)
+ return error;
+ pdata = st_kp->config;
+ }
+
+ input_dev->keycode = st_kp->keycodes;
+ input_dev->keycodesize = sizeof(st_kp->keycodes[0]);
+ input_dev->keycodemax = ARRAY_SIZE(st_kp->keycodes);
+
+ for (i = 0; i < ST_KEYSCAN_MAXKEYS; i++)
+ input_set_capability(input_dev, EV_KEY, st_kp->keycodes[i]);
+ __clear_bit(KEY_RESERVED, input_dev->keybit);
+
+ error = input_register_device(input_dev);
+ if (error) {
+ dev_err(dev, "failed to register input device\n");
+ input_free_device(input_dev);
+ platform_set_drvdata(pdev, NULL);
+ return error;
+ }
+
+ platform_set_drvdata(pdev, st_kp);
+
+ keyscan_start(st_kp);
+
+ device_set_wakeup_capable(&pdev->dev, 1);
+
+ return 0;
+}
+
+static int __exit keyscan_remove(struct platform_device *pdev)
+{
+ struct keyscan_priv *priv = platform_get_drvdata(pdev);
+
+ keyscan_stop(priv);
+
+ input_unregister_device(priv->input_dev);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static int keyscan_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct keyscan_priv *priv = platform_get_drvdata(pdev);
+
+ if (device_may_wakeup(dev))
+ enable_irq_wake(priv->irq);
+ else
+ keyscan_stop(priv);
+
+ return 0;
+}
+
+static int keyscan_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct keyscan_priv *priv = platform_get_drvdata(pdev);
+
+ if (device_may_wakeup(dev))
+ disable_irq_wake(priv->irq);
+ else
+ keyscan_start(priv);
+
+ return 0;
+}
+
+static const struct dev_pm_ops keyscan_dev_pm_ops = {
+ .suspend = keyscan_suspend,
+ .resume = keyscan_resume,
+};
+
+static const struct of_device_id keyscan_of_match[] = {
+ { .compatible = "st,keypad" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, keyscan_of_match);
+
+__refdata struct platform_driver keyscan_device_driver = {
+ .probe = keyscan_probe,
+ .remove = __exit_p(keyscan_remove),
+ .driver = {
+ .name = "st-keyscan",
+ .pm = &keyscan_dev_pm_ops,
+ .of_match_table = of_match_ptr(keyscan_of_match),
+ }
+};
+
+static int __init keyscan_init(void)
+{
+ return platform_driver_register(&keyscan_device_driver);
+}
+
+static void __exit keyscan_exit(void)
+{
+ platform_driver_unregister(&keyscan_device_driver);
+}
+
+module_init(keyscan_init);
+module_exit(keyscan_exit);
+
+MODULE_AUTHOR("Stuart Menefy <stuart.menefy@xxxxxx>");
+MODULE_DESCRIPTION("STMicroelectronics keyscan device driver");
+MODULE_LICENSE("GPL");
--
1.9.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
