[PATCH v4 0/2] i2c: Add support for Qcom CCI I2C controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

This series adds support for Qualcomm Camera Control Interface (CCI) I2C
controller. This block contains one/two I2C masters and registers these
adapters based on the controller probed on.

Changes in v4:
 - Add pm support
 - Fix based on Bjorn feedback

Changes in v3:
 - Update DT binding per RobH comments
 - Add the subnode for bus instances
 - Move all compataible data to driver data
 - add num_master data and use that to register and use masters

Changes in v2:
 - Add support for two adapters




Todor Tomov (2):
  dt-bindings: i2c: Add binding for Qualcomm CCI I2C controller
  i2c: Add Qualcomm CCI I2C driver

 .../devicetree/bindings/i2c/i2c-qcom-cci.txt       |  83 ++
 drivers/i2c/busses/Kconfig                         |  10 +
 drivers/i2c/busses/Makefile                        |   1 +
 drivers/i2c/busses/i2c-qcom-cci.c                  | 879 +++++++++++++++++++++
 4 files changed, 973 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
 create mode 100644 drivers/i2c/busses/i2c-qcom-cci.c

-- 
2.14.4




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux