Ocelot has an i2c controller, add it. There is only one possible pinmux
configuration so add it as well.
Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
---
arch/mips/boot/dts/mscc/ocelot.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi
index 4f33dbc67348..34093acebc0d 100644
--- a/arch/mips/boot/dts/mscc/ocelot.dtsi
+++ b/arch/mips/boot/dts/mscc/ocelot.dtsi
@@ -78,6 +78,19 @@
status = "disabled";
};
+ i2c: i2c@100400 {
+ compatible = "mscc,ocelot-i2c", "snps,designware-i2c";
+ pinctrl-0 = <&i2c_pins>;
+ pinctrl-names = "default";
+ reg = <0x100400 0x100>, <0x198 0x8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <8>;
+ clocks = <&ahb_clk>;
+
+ status = "disabled";
+ };
+
uart2: serial@100800 {
pinctrl-0 = <&uart2_pins>;
pinctrl-names = "default";
@@ -178,6 +191,11 @@
pins = "GPIO_12", "GPIO_13";
function = "uart2";
};
+
+ i2c_pins: i2c-pins {
+ pins = "GPIO_16", "GPIO_17";
+ function = "twi";
+ };
};
mdio0: mdio@107009c {
--
2.18.0
