Re: [PATCH 07/10] dt-bindings: phy: add DT binding for Microsemi Ocelot SerDes muxing

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 13/08/2018 16:37:48-0600, Rob Herring wrote:
> > I'm fine with a define for the second value (which is basically the enum
> > serdes_type I've defined at the beginning of the serdes driver) but I
> > don't see the point of defining the index of the SerDes. What would it
> > look like?
> > 
> > enum serdes_type {
> > 	SERDES1G = 1,
> > 	SERDES6G = 6,
> > }
> > 
> > #define SERDES1G_0	0
> > #define SERDES1G_1	1
> > #define SERDES1G_2	2
> > #define SERDES6G_0	0
> > #define SERDES6G_1	1
> > 
> > Then, e.g.:
> > 
> > &port5 {
> > 	phys = <&serdes 5 SERDES1G SERDES1G_0>
> > };
> > 
> > If you want a define for the pair (serdes_type, serdes_index), I don't
> > see how I could re-use it on the driver side but it makes more sense on the
> > DeviceTree side:
> > 
> > #define SERDES1G_0	1 0
> > #define SERDES1G_1	1 1
> > #define SERDES1G_2	1 2
> > #define SERDES6G_0	6 0
> > #define SERDES6G_1	6 1
> 
> I prefer #defines which are a single number. Otherwise if you read a dts 
> file when #phy-cells is 3, it will look like an error in that you have 
> what looks like 2 cells.
> 

Maybe we should not have the type in DT and simply have an index. The
driver will now what the serdes type is anyway and the defines would be:

#define SERDES1G_0  0
#define SERDES1G_1  1
#define SERDES1G_2  2
#define SERDES6G_0  3
#define SERDES6G_1  4

The main drawback is that this requires one include file per soc.

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux