[PATCH] arm64: dts: sdm630 SoC and Sony Pioneer (Xperia XA2) support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Initial device tree support for Qualcomm SDM630 SoC and
Sony Pioneer (Xperia XA2).

SDM630 is based off of the SDM660 soc and all SDM660 specific drivers are
compatible with it. SDM660 is also based off of MSM8998 so it uses some
of its drivers aswell.

The device tree is based on the CAF 4.4 kernel tree.

The device can be booted into the initrd with a shell over UART.

Signed-off-by: Craig Tatlor <ctatlor97@xxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/Makefile            |   1 +
 arch/arm64/boot/dts/qcom/sdm630-pins.dtsi    |  17 +
 arch/arm64/boot/dts/qcom/sdm630-pioneer.dts  |  16 +
 arch/arm64/boot/dts/qcom/sdm630-pioneer.dtsi |  22 ++
 arch/arm64/boot/dts/qcom/sdm630.dtsi         | 383 +++++++++++++++++++
 5 files changed, 439 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sdm630-pins.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/sdm630-pioneer.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sdm630-pioneer.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/sdm630.dtsi

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 9319e74b8906..80f98bb19998 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -6,4 +6,5 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-bullhead-rev-101.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-angler-rev-101.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-pioneer.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-mtp.dtb
diff --git a/arch/arm64/boot/dts/qcom/sdm630-pins.dtsi b/arch/arm64/boot/dts/qcom/sdm630-pins.dtsi
new file mode 100644
index 000000000000..78b79c1076f1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-pins.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2018, Craig Tatlor. */
+
+&tlmm {
+	blsp1_uart1_default: blsp1_uart1_default {
+		pinmux {
+			pins = "gpio0", "gpio1", "gpio2", "gpio3";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio0", "gpio1", "gpio2", "gpio3";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630-pioneer.dts b/arch/arm64/boot/dts/qcom/sdm630-pioneer.dts
new file mode 100644
index 000000000000..67c7e3b57739
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-pioneer.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2018, Craig Tatlor. */
+
+/dts-v1/;
+
+#include "sdm630-pioneer.dtsi"
+
+/ {
+	model = "Sony Xperia XA2";
+	compatible = "sony,pioneer", "qcom,sdm630";
+
+	/* required for bootloader to select correct board */
+	qcom,board-id = <8 0>;
+	qcom,pmic-id = <0x0001001b 0x0101011a 0x0 0x0>,
+			<0x0001001b 0x0201011a 0x0 0x0>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630-pioneer.dtsi b/arch/arm64/boot/dts/qcom/sdm630-pioneer.dtsi
new file mode 100644
index 000000000000..512792c23369
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-pioneer.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2018, Craig Tatlor. */
+
+#include "sdm630.dtsi"
+
+/ {
+	aliases {
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&soc {
+	serial@c170000 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&blsp1_uart1_default>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
new file mode 100644
index 000000000000..8a544979b7c0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -0,0 +1,383 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2018, Craig Tatlor. */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-sdm660.h>
+
+/ {
+	model = "Qualcomm Technologies, Inc. SDM630";
+
+	interrupt-parent = <&intc>;
+
+	qcom,msm-id = <318 0x0>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	memory {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0 0 0>;
+	};
+
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			efficiency = <1126>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				compatible = "arm,arch-cache";
+				cache-level = <2>;
+			};
+			L1_I_100: l1-icache {
+				compatible = "arm,arch-cache";
+			};
+			L1_D_100: l1-dcache {
+				compatible = "arm,arch-cache";
+			};
+		};
+
+		CPU1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			efficiency = <1126>;
+			next-level-cache = <&L2_1>;
+			L1_I_101: l1-icache {
+				compatible = "arm,arch-cache";
+			};
+			L1_D_101: l1-dcache {
+				compatible = "arm,arch-cache";
+			};
+		};
+
+		CPU2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			efficiency = <1126>;
+			next-level-cache = <&L2_1>;
+			L1_I_102: l1-icache {
+				compatible = "arm,arch-cache";
+			};
+			L1_D_102: l1-dcache {
+				compatible = "arm,arch-cache";
+			};
+		};
+
+		CPU3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			efficiency = <1126>;
+			next-level-cache = <&L2_1>;
+			L1_I_103: l1-icache {
+				compatible = "arm,arch-cache";
+			};
+			L1_D_103: l1-dcache {
+				compatible = "arm,arch-cache";
+			};
+		};
+
+		CPU4: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			efficiency = <1024>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "arm,arch-cache";
+				cache-level = <2>;
+			};
+			L1_I_0: l1-icache {
+				compatible = "arm,arch-cache";
+			};
+			L1_D_0: l1-dcache {
+				compatible = "arm,arch-cache";
+			};
+		};
+
+		CPU5: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			efficiency = <1024>;
+			next-level-cache = <&L2_0>;
+			L1_I_1: l1-icache {
+				compatible = "arm,arch-cache";
+			};
+			L1_D_1: l1-dcache {
+				compatible = "arm,arch-cache";
+			};
+		};
+
+		CPU6: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			efficiency = <1024>;
+			next-level-cache = <&L2_0>;
+			L1_I_2: l1-icache {
+				compatible = "arm,arch-cache";
+			};
+			L1_D_2: l1-dcache {
+				compatible = "arm,arch-cache";
+			};
+		};
+
+		CPU7: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			efficiency = <1024>;
+			next-level-cache = <&L2_0>;
+			L1_I_3: l1-icache {
+				compatible = "arm,arch-cache";
+			};
+			L1_D_3: l1-dcache {
+				compatible = "arm,arch-cache";
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	clocks {
+		xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-sdm660";
+		};
+	};
+
+
+	rpm-glink {
+		compatible = "qcom,glink-rpm";
+
+		interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+
+		mboxes = <&apcs_glb 0>;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x17a00000 0x10000>,
+			      <0x17b00000 0x100000>;
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sdm660";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x100000 0x94000>;
+		};
+
+		tlmm: pinctrl@3000000 {
+			compatible = "qcom,sdm660-pinctrl";
+			reg = <0x3000000 0xc00000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		blsp1_uart1: serial@c170000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xc170000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		timer@17920000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x17920000 0x1000>;
+
+			frame@17921000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17921000 0x1000>,
+				      <0x17922000 0x1000>;
+			};
+
+			frame@17923000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17923000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17924000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17924000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17925000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17925000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17926000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17926000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17927000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17927000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17928000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x17928000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		spmi_bus: qcom,spmi@800f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg =	<0x800f000 0x1000>,
+				<0x8400000 0x1000000>,
+				<0x9400000 0x1000000>,
+				<0xa400000 0x220000>,
+				<0x800a000 0x3000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			cell-index = <0>;
+		};
+
+		rpm_msg_ram: memory@778000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x778000 0x7000>;
+		};
+
+		apcs_glb: mailbox@17911000 {
+			compatible = "qcom,msm8998-apcs-hmss-global";
+			reg = <0x17911000 0x1000>;
+
+			#mbox-cells = <1>;
+		};
+
+	};
+};
+
+#include "sdm630-pins.dtsi"
-- 
2.18.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux