Add a new sdhci_ops struct for Tegra210 and Tegra186 which doesn't
set the custom tuning callback used on previous SoC generations.
Signed-off-by: Aapo Vienamo <avienamo@xxxxxxxxxx>
---
drivers/mmc/host/sdhci-tegra.c | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 7f1b0b4..bac2034 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -816,6 +816,19 @@ static const struct sdhci_tegra_soc_data soc_data_tegra124 = {
.pdata = &sdhci_tegra124_pdata,
};
+static const struct sdhci_ops tegra210_sdhci_ops = {
+ .get_ro = tegra_sdhci_get_ro,
+ .read_w = tegra_sdhci_readw,
+ .write_w = tegra_sdhci_writew,
+ .write_l = tegra_sdhci_writel,
+ .set_clock = tegra_sdhci_set_clock,
+ .set_bus_width = sdhci_set_bus_width,
+ .reset = tegra_sdhci_reset,
+ .set_uhs_signaling = tegra_sdhci_set_uhs_signaling,
+ .voltage_switch = tegra_sdhci_voltage_switch,
+ .get_max_clock = tegra_sdhci_get_max_clock,
+};
+
static const struct sdhci_pltfm_data sdhci_tegra210_pdata = {
.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
@@ -824,7 +837,7 @@ static const struct sdhci_pltfm_data sdhci_tegra210_pdata = {
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
- .ops = &tegra114_sdhci_ops,
+ .ops = &tegra210_sdhci_ops,
};
static const struct sdhci_tegra_soc_data soc_data_tegra210 = {
@@ -850,7 +863,7 @@ static const struct sdhci_pltfm_data sdhci_tegra186_pdata = {
* But it is not supported as of now.
*/
SDHCI_QUIRK2_BROKEN_64_BIT_DMA,
- .ops = &tegra114_sdhci_ops,
+ .ops = &tegra210_sdhci_ops,
};
static const struct sdhci_tegra_soc_data soc_data_tegra186 = {
--
2.7.4
