Configure the voltage reference used by the automatic pad drive strength
calibration procedure. The value is a magic number from the TRM.
Signed-off-by: Aapo Vienamo <avienamo@xxxxxxxxxx>
---
drivers/mmc/host/sdhci-tegra.c | 56 +++++++++++++++++++++++++-----------------
1 file changed, 33 insertions(+), 23 deletions(-)
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index a62a3fc..6ddc7c2 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -41,27 +41,31 @@
#define SDHCI_CLOCK_CTRL_PADPIPE_CLKEN_OVERRIDE BIT(3)
#define SDHCI_CLOCK_CTRL_SPI_MODE_CLKEN_OVERRIDE BIT(2)
-#define SDHCI_TEGRA_VENDOR_MISC_CTRL 0x120
-#define SDHCI_MISC_CTRL_ENABLE_SDR104 0x8
-#define SDHCI_MISC_CTRL_ENABLE_SDR50 0x10
-#define SDHCI_MISC_CTRL_ENABLE_SDHCI_SPEC_300 0x20
-#define SDHCI_MISC_CTRL_ENABLE_DDR50 0x200
-
-#define SDHCI_TEGRA_AUTO_CAL_CONFIG 0x1e4
-#define SDHCI_AUTO_CAL_START BIT(31)
-#define SDHCI_AUTO_CAL_ENABLE BIT(29)
-
-#define SDHCI_TEGRA_AUTO_CAL_STATUS 0x1ec
-#define SDHCI_TEGRA_AUTO_CAL_ACTIVE BIT(31)
-
-#define NVQUIRK_FORCE_SDHCI_SPEC_200 BIT(0)
-#define NVQUIRK_ENABLE_BLOCK_GAP_DET BIT(1)
-#define NVQUIRK_ENABLE_SDHCI_SPEC_300 BIT(2)
-#define NVQUIRK_ENABLE_SDR50 BIT(3)
-#define NVQUIRK_ENABLE_SDR104 BIT(4)
-#define NVQUIRK_ENABLE_DDR50 BIT(5)
-#define NVQUIRK_HAS_PADCALIB BIT(6)
-#define NVQUIRK_NEEDS_PAD_CONTROL BIT(7)
+#define SDHCI_TEGRA_VENDOR_MISC_CTRL 0x120
+#define SDHCI_MISC_CTRL_ENABLE_SDR104 0x8
+#define SDHCI_MISC_CTRL_ENABLE_SDR50 0x10
+#define SDHCI_MISC_CTRL_ENABLE_SDHCI_SPEC_300 0x20
+#define SDHCI_MISC_CTRL_ENABLE_DDR50 0x200
+
+#define SDHCI_TEGRA_AUTO_CAL_CONFIG 0x1e4
+#define SDHCI_AUTO_CAL_START BIT(31)
+#define SDHCI_AUTO_CAL_ENABLE BIT(29)
+
+#define SDHCI_TEGRA_SDMEM_COMP_PADCTRL 0x1e0
+#define SDHCI_TEGRA_SDMEM_COMP_PADCTRL_VREF_SEL_MASK 0x0000000f
+#define SDHCI_TEGRA_SDMEM_COMP_PADCTRL_VREF_SEL_VAL 0x7
+
+#define SDHCI_TEGRA_AUTO_CAL_STATUS 0x1ec
+#define SDHCI_TEGRA_AUTO_CAL_ACTIVE BIT(31)
+
+#define NVQUIRK_FORCE_SDHCI_SPEC_200 BIT(0)
+#define NVQUIRK_ENABLE_BLOCK_GAP_DET BIT(1)
+#define NVQUIRK_ENABLE_SDHCI_SPEC_300 BIT(2)
+#define NVQUIRK_ENABLE_SDR50 BIT(3)
+#define NVQUIRK_ENABLE_SDR104 BIT(4)
+#define NVQUIRK_ENABLE_DDR50 BIT(5)
+#define NVQUIRK_HAS_PADCALIB BIT(6)
+#define NVQUIRK_NEEDS_PAD_CONTROL BIT(7)
struct sdhci_tegra_soc_data {
const struct sdhci_pltfm_data *pdata;
@@ -187,7 +191,7 @@ static void tegra_sdhci_reset(struct sdhci_host *host, u8 mask)
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data;
- u32 misc_ctrl, clk_ctrl;
+ u32 misc_ctrl, clk_ctrl, pad_ctrl;
sdhci_reset(host, mask);
@@ -222,8 +226,14 @@ static void tegra_sdhci_reset(struct sdhci_host *host, u8 mask)
sdhci_writel(host, misc_ctrl, SDHCI_TEGRA_VENDOR_MISC_CTRL);
sdhci_writel(host, clk_ctrl, SDHCI_TEGRA_VENDOR_CLOCK_CTRL);
- if (soc_data->nvquirks & NVQUIRK_HAS_PADCALIB)
+ if (soc_data->nvquirks & NVQUIRK_HAS_PADCALIB) {
+ pad_ctrl = sdhci_readl(host, SDHCI_TEGRA_SDMEM_COMP_PADCTRL);
+ pad_ctrl &= ~SDHCI_TEGRA_SDMEM_COMP_PADCTRL_VREF_SEL_MASK;
+ pad_ctrl |= SDHCI_TEGRA_SDMEM_COMP_PADCTRL_VREF_SEL_VAL;
+ sdhci_writel(host, pad_ctrl, SDHCI_TEGRA_SDMEM_COMP_PADCTRL);
+
tegra_host->pad_calib_required = true;
+ }
tegra_host->ddr_signaling = false;
}
--
2.7.4
