2018-08-09 9:53 GMT+02:00 Neil Armstrong <narmstrong@xxxxxxxxxxxx>:
> On 08/08/2018 10:41, Jerome Brunet wrote:
>> On Wed, 2018-08-08 at 00:00 +0200, Maxime Jourdan wrote:
>>> Wrap the canvas node in a syscon node.
>>>
>>> Signed-off-by: Maxime Jourdan <maxi.jourdan@xxxxxxxxxx>
>>> ---
>>> arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 17 +++++++++++++++++
>>> 1 file changed, 17 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>>> index b8dc4dbb391b..c98198662ae2 100644
>>> --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>>> +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
>>> @@ -423,6 +423,23 @@
>>> };
>>> };
>>>
>>> + dmcbus: bus@c8838000 {
>>> + compatible = "simple-bus";
>>> + reg = <0x0 0xc8838000 0x0 0x1000>;
>>> + #address-cells = <2>;
>>> + #size-cells = <2>;
>>> + ranges = <0x0 0x0 0x0 0xc8838000 0x0 0x1000>;
>>> +
>>> + sysctrl_DMC: system-controller@0 {
>>> + compatible = "amlogic,gx-dmc-sysctrl", "syscon", "simple-mfd";
>>> + reg = <0x0 0x0 0x0 0x1000>;
>>> +
>>> + canvas: canvas-provider@0 {
>>> + compatible = "amlogic,canvas";
>>
>> If there is only one canvas provider under "sysctrl_DMC" and it has no reg
>> property , you should not put a unit-address (@0) here. (same for the
>> documentation patch)
>>
>> You may have seen unit-address without a reg property used elsewhere (ASoC
>> simple-card, my recent axg-sound-card), when there is multiple node with the
>> same node-name (ex: dai-link).
Ack.
>> As Martin pointed out, the DT spec says we should not use unit-address unless
>> there is a reg property. We did not get Rob's view on this and we might have to
>> update this later on. In your case, unless I missed something, you should
>> definitely not have it
>>
>> nitpick regarding the node-name (canvas-provider). If appropriate, we should try
>> to stick to one of the generic names proposed in the spec. I wonder if the
>> canvas provider could be viewed as a "memory" or "memory-controller"
>
> It's not really a memory or memory-controller, it's a Lookup Table on top of the memory controller,
> nothing really matches here...
Thanks for the comments. It will be "video-lut" as suggested.
>>
>> So, what about this ? Just a proposition, feel free to comment ;)
>>
>> sysctrl_DMC: system-controller@0 { compatib
>> le = "amlogic,gx-dmc-sysctrl", "syscon", "simple-mfd";> reg =
>> <0x0 0x0 0x0 0x1000>;
>>
>> canvas: memory-controller {
>> compatible = "amlogic,canvas";
>> }
>>
>> [...]
>>
>>
>>> + };
>>> + };
>>> + };
>>> +
>>> hiubus: bus@c883c000 {
>>> compatible = "simple-bus";
>>> reg = <0x0 0xc883c000 0x0 0x2000>;
>>
>>
>
