On Thu, Aug 09, 2018 at 06:02:41PM +0530, Amit Kucheria wrote: > Instead of showing up as thermal-sensor@<addr>, the nodes will show up as > tsens0_tm, tsen1_tm, tsens1_srot, etc. in /proc/iomem making it easier to > read. > > IOW, > > 0c222000-0c2221fe : thermal-sensor@c263000 > 0c223000-0c2231fe : thermal-sensor@c265000 > 0c263000-0c2631fe : thermal-sensor@c263000 > 0c265000-0c2651fe : thermal-sensor@c265000 > > becomes > > 0c222000-0c2221fe : tsens0_srot > 0c223000-0c2231fe : tsens1_srot > 0c263000-0c2631fe : tsens0_tm > 0c265000-0c2651fe : tsens1_tm > > Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx> > --- > arch/arm/boot/dts/qcom-msm8974.dtsi | 1 + > arch/arm64/boot/dts/qcom/msm8916.dtsi | 1 + > arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 ++ > arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 ++ > 4 files changed, 6 insertions(+) > > diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi > index 3c4b81c29798..64c9f81ddd90 100644 > --- a/arch/arm/boot/dts/qcom-msm8974.dtsi > +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi > @@ -431,6 +431,7 @@ > compatible = "qcom,msm8974-tsens"; > reg = <0xfc4a9000 0x1000>, /* TM */ > <0xfc4a8000 0x1000>; /* SROT */ > + reg-names = "tsens_tm", "tsens_srot"; > nvmem-cells = <&tsens_calib>, <&tsens_backup>; > nvmem-cell-names = "calib", "calib_backup"; > #qcom,sensors = <11>; > diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi > index abf84df5a7bc..4e6a5e462a91 100644 > --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi > +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi > @@ -778,6 +778,7 @@ > compatible = "qcom,msm8916-tsens"; > reg = <0x4a9000 0x1000>, /* TM */ > <0x4a8000 0x1000>; /* SROT */ > + reg-names = "tsens_tm", "tsens_srot"; > nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; > nvmem-cell-names = "calib", "calib_sel"; > #qcom,sensors = <5>; > diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi > index c2dca3a30091..7e5982daa2ed 100644 > --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi > +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi > @@ -969,6 +969,7 @@ > compatible = "qcom,msm8996-tsens"; > reg = <0x4a9000 0x1000>, /* TM */ > <0x4a8000 0x1000>; /* SROT */ > + reg-names = "tsens0_tm", "tsens0_srot"; > #qcom,sensors = <13>; > #thermal-sensor-cells = <1>; > }; > @@ -977,6 +978,7 @@ > compatible = "qcom,msm8996-tsens"; > reg = <0x4ad000 0x1000>, /* TM */ > <0x4ac000 0x1000>; /* SROT */ > + reg-names = "tsens1_tm", "tsens1_srot"; > #qcom,sensors = <8>; > #thermal-sensor-cells = <1>; > }; > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi > index f722785df26b..efd5d7abd1cd 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > @@ -1531,6 +1531,7 @@ > compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; > reg = <0xc263000 0x1ff>, /* TM */ > <0xc222000 0x1ff>; /* SROT */ > + reg-names = "tsens0_tm", "tsens0_srot"; > #qcom,sensors = <13>; > #thermal-sensor-cells = <1>; > }; > @@ -1539,6 +1540,7 @@ > compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; > reg = <0xc265000 0x1ff>, /* TM */ > <0xc223000 0x1ff>; /* SROT */ > + reg-names = "tsens1_tm", "tsens1_srot"; > #qcom,sensors = <8>; > #thermal-sensor-cells = <1>; > }; Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
