The reg-names property in the documentation is missing an '='. Add it. Fixes: 9feb786876c7 ("media: dt-bindings: media: adv7604: Extend bindings to allow specifying slave map addresses") Signed-off-by: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx> --- v2: - Commit title changed to prefix as "dt-bindings: media:" If this is collected through a DT tree, I assume therefore this will be fine, but if it is to go through the media-tree, please update as necessaary to prevent the redundant dual "media:" tagging. (I'll leave it to the maintainers to decide whose tree thise should go through) Thanks Kieran Documentation/devicetree/bindings/media/i2c/adv7604.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.txt b/Documentation/devicetree/bindings/media/i2c/adv7604.txt index dcf57e7c60eb..b3e688b77a38 100644 --- a/Documentation/devicetree/bindings/media/i2c/adv7604.txt +++ b/Documentation/devicetree/bindings/media/i2c/adv7604.txt @@ -66,7 +66,7 @@ Example: * other maps will retain their default addresses. */ reg = <0x4c>, <0x66>; - reg-names "main", "edid"; + reg-names = "main", "edid"; reset-gpios = <&ioexp 0 GPIO_ACTIVE_LOW>; hpd-gpios = <&ioexp 2 GPIO_ACTIVE_HIGH>; -- 2.17.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html