Re: [PATCH v3 4/6] i2c: designware: add MSCC Ocelot support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Aug 06, 2018 at 08:54:10PM +0200, Alexandre Belloni wrote:
> The Microsemi Ocelot I2C controller is a designware IP. It also has a
> second set of registers to allow tweaking SDA hold time and spike
> filtering.
> 
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
> ---
>  .../bindings/i2c/i2c-designware.txt           |  9 ++++-

Please split binding patches.

>  drivers/i2c/busses/i2c-designware-core.h      |  3 ++
>  drivers/i2c/busses/i2c-designware-platdrv.c   | 40 +++++++++++++++++++
>  3 files changed, 50 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
> index fbb0a6d8b964..7886f2dc6675 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt
> +++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
> @@ -2,7 +2,8 @@
>  
>  Required properties :
>  
> - - compatible : should be "snps,designware-i2c"
> + - compatible : should be "snps,designware-i2c" or "mscc,ocelot-i2c" followed by
> +   "snps,designware-i2c" for fallback

Please reformat to one valid combination per line.

>   - reg : Offset and length of the register set for the device
>   - interrupts : <IRQ> where IRQ is the interrupt number.
>  
> @@ -11,8 +12,12 @@ Recommended properties :
>   - clock-frequency : desired I2C bus clock frequency in Hz.
>  
>  Optional properties :
> + - reg : for "mscc,ocelot-i2c", a second register set to configure the SDA hold
> +   time, named ICPU_CFG:TWI_DELAY in the datasheet.
> +
>   - i2c-sda-hold-time-ns : should contain the SDA hold time in nanoseconds.
> -   This option is only supported in hardware blocks version 1.11a or newer.
> +   This option is only supported in hardware blocks version 1.11a or newer and
> +   on Microsemi SoCs ("mscc,ocelot-i2c" compatible).
>  
>   - i2c-scl-falling-time-ns : should contain the SCL falling time in nanoseconds.
>     This value which is by default 300ns is used to compute the tLOW period.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux