On Wed, Aug 01, 2018 at 05:57:42PM -0700, Saravana Kannan wrote:
> This driver registers itself as a devfreq device that allows devfreq
> governors to make bandwidth votes for an interconnect path. This allows
> applying various policies for different interconnect paths using devfreq
> governors.
>
> Example uses:
> * Use the devfreq performance governor to set the CPU to DDR interconnect
> path for maximum performance.
> * Use the devfreq performance governor to set the GPU to DDR interconnect
> path for maximum performance.
> * Use the CPU frequency to device frequency mapping governor to scale the
> DDR frequency based on the needs of the CPUs' current frequency.
>
> Signed-off-by: Saravana Kannan <skannan@xxxxxxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/devfreq/icbw.txt | 21 ++++
Please make bindings separate a patch.
> drivers/devfreq/Kconfig | 13 +++
> drivers/devfreq/Makefile | 1 +
> drivers/devfreq/devfreq_icbw.c | 116 +++++++++++++++++++++
> 4 files changed, 151 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/devfreq/icbw.txt
> create mode 100644 drivers/devfreq/devfreq_icbw.c
>
> diff --git a/Documentation/devicetree/bindings/devfreq/icbw.txt b/Documentation/devicetree/bindings/devfreq/icbw.txt
> new file mode 100644
> index 0000000..36cf045
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/devfreq/icbw.txt
> @@ -0,0 +1,21 @@
> +Interconnect bandwidth device
> +
> +icbw is a device that represents an interconnect path that connects two
> +devices. This device is typically used to vote for BW requirements between
> +two devices. Eg: CPU to DDR, GPU to DDR, etc
I'm pretty sure this doesn't represent a h/w device. This usage doesn't
encourage me to accept the interconnects binding either.
> +
> +Required properties:
> +- compatible: Must be "devfreq-icbw"
> +- interconnects: Pairs of phandles and interconnect provider specifier
> + to denote the edge source and destination ports of
> + the interconnect path. See also:
> + Documentation/devicetree/bindings/interconnect/interconnect.txt
> +- interconnect-names: Must have one entry with the name "path".
That's pretty useless...
> +
> +Example:
> +
> + qcom,cpubw {
Someone in QCom please broadcast to stop using qcom,foo for node names.
It is amazing how consistent you all are. If only folks were as
consistent in reading
Documentation/devicetree/bindings/submitting-patches.txt.
Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
